如何让CSDN博客里面的代码看起来更美观漂亮

void CClearDtc::ClearCode(const CString &strEcu)
{
adsMessageBox(STD_TEXT_INFORMATION, STD_TEXT_COMMING, DF_MB_NOBUTTON);
CBinary	binEcu = SetBinary(CB_ReadDtc, HexStrToBinary(strEcu), 4);
CString strFilePath;
strFilePath = "\\EcuFiles\\" + strEcu + ".ods";
CDataSheet openFile;
openFile.Open(strFilePath);
openFile.SetKey(binEcu);
CString strEraserCmd = openFile.GetValue(STR_Menu, STR_EraserCmd);

if (strEraserCmd.IsEmpty())
{
adsMessageBox(STD_TEXT_INFORMATION, STD_TEXT_FUNC_NOT_SUPPORT, DF_MB_OK);
return;

}

D_I32 iRet = adsMessageBox(STD_MENU_CLEAR_DTC, STD_TEXT_CONFIRMING, DF_MB_YESNO);
if (DF_IDNO == iRet)
{
return;
}

iRet = adsMessageBox(STD_MENU_CLEAR_DTC, STD_TEXT_CLEAR_DTC, DF_MB_YESNO);
if (DF_IDNO == iRet)
{
return;
}

CBinary binEraserCmd, binRequest, binResponse, binRecv;
CString strRequest, strReqDelay, strResponse;

//清码命令可能有多条
CGroup<CString>vctEraserCmd;
Split(vctEraserCmd, strEraserCmd, "#");
for (D_I16 iCmd = 0; iCmd < vctEraserCmd.GetSize(); iCmd++)
{
binEraserCmd = SetBinary(binEcu, StrHextoBinary(vctEraserCmd[iCmd]), 1);
openFile.SetKey(binEraserCmd);
strRequest = openFile.GetValue(STR_Req, STR_Request);
binRequest = HexStrToBinary(strRequest);
strReqDelay = openFile.GetValue(STR_Req, STR_ReqDelay);
strResponse = openFile.GetValue(STR_Rsp, STR_Response);
binResponse = HexStrToBinary(strResponse);
binRecv = SendCmd(binRequest);
if (!strReqDelay.IsEmpty())
{
Delay(StrToInt(strReqDelay));
}
}

adsMessageBox(STD_MENU_CLEAR_DTC, STD_TEXT_CLEARING_DTC, DF_MB_NOBUTTON);

if (binRecv.IsEmpty())//只要有收到命令即可清码，不需要SID位+0x40
{
adsMessageBox(STD_MENU_CLEAR_DTC, STD_TEXT_COMM_FAIL, DF_MB_OK);
}
else
{
adsMessageBox(STD_MENU_CLEAR_DTC, STD_TEXT_SUCCESS, DF_MB_OK);
}
}