paping使用来测试联通&网站由于tcp协议导致的无法通信问题超时问题

今天上班遇到一个神奇的问题，之所以神奇，是因为自己之前从来没遇到过，就好像之前从来没打过电话，拿到电话，突然发现一根线或线都不需要就可以和千里之外的Ta聊天的感觉

首先介绍一个工具，微软云同事介绍的，用于解决一些服务器禁止Ping, icmp 包响应的另外一种方式：

1. 使用paping来测试连通性 Linux 平台： ：

wget http://www.updateweb.cn/softwares/paping_1.5.5_x86-64_linux.tar.gz

or

wget https://zhangtaostorage.blob.core.chinacloudapi.cn/share/paping_1.5.5_x86-64_linux.tar.gz

这是一个压缩包，解压方法 tar zvxf paping_1.5.5_x86-64_linux.tar.gz

使用方法 ./paping–p 80 -c 500 www.xxx.com (该示例命令为进行500次的 目标IP 80 端口的连通性测试)



2、使用psping来测试连通性 win平台：

Psping下载地址: http://www.updateweb.cn/softwares/PSTools.zip

OR

Psping下载地址: http://technet.microsoft.com/en-us/sysinternals/jj729731

并且放到C:\Windows\system32目录下

然后在cmd模式下执行：psping ipaddress:port

例如：



-----------------------------------------------------------------------

言归正传：

你发现第一张图，出现了connection timed out 的提示， 而同一网下的另一台机器却连通自在， 第一反应就是防火墙 or 网络黑名单阻止掉了，经过多方一起排查，这个猜想是错误的，

最后解决方法是：

确认一下您的Linux系统的内核参数配置：sysctl -a | grep tcp

sysctl -w net.ipv4.tcp_timestamps=1

sysctl -w net.ipv4.tcp_tw_recycle=0

改为Linux 内核参数：

sysctl -w net.ipv4.tcp_timestamps=0

sysctl -w net.ipv4.tcp_tw_recycle=0

即可， 网络一下子就顺畅了

附注：

---------------------------------------------------------

PsPing v2.01 使用说明

By Mark Russinovich

Published: January 29, 2014



Download PsTools(1,644 KB)

Rate:
Introduction

PsPing implements Ping functionality, TCP ping, latency and bandwidth measurement. Use the following command-line options to show the usage for each test type:

Installation

Copy PsPing onto your executable path. Typing "psping" displays its usage syntax.

Using PsPing

PsPing implements Ping functionality, TCP ping, latency and bandwidth measurement. Use the following command-line options to show the usage for each test type:

Usage: psping -? [i|t|l|b]

-? IUsage for ICMP ping.-? TUsage for TCP ping.-? LUsage for latency test.-? BUsage for bandwidth test.

ICMP ping usage: psping [[-6]|[-4]] [-h [buckets | <val1>,<val2>,...]] [-i <interval>] [-l <requestsize>[k|m] [-q] [-t|-n <count>] [-w <count>] <destination>

-hPrint histogram (default bucket count is 20).
If you specify a single argument, it's interpreted as a bucket count and the histogram will contain that number of buckets covering the entire time range of values. Specify a comma-separated list of times to create a custom histogram (e.g. "0.01,0.05,1,5,10").-iInterval in seconds. Specify 0 for fast ping.-lRequest size. Append 'k' for kilobytes and 'm' for megabytes.-nNumber of pings or append 's' to specify seconds e.g. '10s'.-qDon't output during pings.-tPing until stopped with Ctrl+C and type Ctrl+Break for statistics.-wWarmup with the specified number of iterations (default is 1).-4Force using IPv4.-6Force using IPv6.

For high-speed ping tests use -q and -i 0.

TCP ping usage: psping [[-6]|[-4]] [-h [buckets | <val1>,<val2>,...]] [-i <interval>] [-l <requestsize>[k|m] [-q] [-t|-n <count>] [-w <count>] <destination:destport>

-hPrint histogram (default bucket count is 20).
If you specify a single argument, it's interpreted as a bucket count and the histogram will contain that number of buckets covering the entire time range of values. Specify a comma-separated list of times to create a custom histogram (e.g. "0.01,0.05,1,5,10").-iInterval in seconds. Specify 0 for fast ping.-lRequest size. Append 'k' for kilobytes and 'm' for megabytes.-nNumber of pings or append 's' to specify seconds e.g. '10s'.-qDon't output during pings.-tPing until stopped with Ctrl+C and type Ctrl+Break for statistics.-wWarmup with the specified number of iterations (default is 1).-4Force using IPv4.-6Force using IPv6.

For high-speed ping tests use -q and -i 0.

TCP and UDP latency usage:

server: psping [[-6]|[-4]] [-f] <-s source:sourceport>

client: psping [[-6]|[-4]] [-f] [-u] [-h [buckets | <val1>,<val2>,...]] [-r] <-l requestsize>[k|m]] <-n count> [-w <count>] <destination:destport>

-fOpen source firewall port during the run.-uUDP (default is TCP).-hPrint histogram (default bucket count is 20).
If you specify a single argument, it's interpreted as a bucket count and the histogram will contain that number of buckets covering the entire time range of values. Specify a comma-separated list of times to create a custom histogram (e.g. "0.01,0.05,1,5,10").-lRequest size. Append 'k' for kilobytes and 'm' for megabytes.-nNumber of sends/receives. Append 's' to specify seconds e.g. '10s'-rReceive from the server instead of sending.-wWarmup with the specified number of iterations (default is 5).-4Force using IPv4.-6Force using IPv6.-sServer listening address and port.

The server can serve both latency and bandwidth tests and remains active until you terminate it with Control-C.

TCP and UDP bandwidth usage:

server: psping [[-6]|[-4]] [-f] <-s source:sourceport>

client: psping [[-6]|[-4]] [-f] [-u] [-h [buckets | <val1>,<val2>,...]] [-r] <-l requestsize>[k|m]] <-n count> [-i <outstanding>] [-w <count>] <destination:destport>

-fOpen source firewall port during the run.-uUDP (default is TCP).-bBandwidth test.-hPrint histogram (default bucket count is 20).
If you specify a single argument, it's interpreted as a bucket count and the histogram will contain that number of buckets covering the entire time range of values. Specify a comma-separated list of times to create a custom histogram (e.g. "0.01,0.05,1,5,10").-iNumber of outstanding I/Os (default is min of 16 and 2x CPU cores).-lRequest size. Append 'k' for kilobytes and 'm' for megabytes.-nNumber of sends/receives. Append 's' to specify seconds e.g. '10s'-rReceive from the server instead of sending.-wWarmup for the specified iterations (default is 2x CPU cores).-4Force using IPv4.-6Force using IPv6.-sServer listening address and port.

The server can serve both latency and bandwidth tests and remains active until you terminate it with Control-C.

Examples

This command executes an ICMP ping test for 10 iterations with 3 warmup iterations:
psping -n 10 -w 3 marklap

To execute a TCP connect test, specify the port number. The following command executes connect attempts against the target as quickly as possible, only printing a summary when finished with the 100 iterations and 1 warmup iteration:
psping -n 100 -i 0 -q marklap:80

To configure a server for latency and bandwidth tests, simply specify the -s option and the source address and port the server will bind to:
psping -s 192.168.2.2:5000

A buffer size is required to perform a TCP latency test. This example measures the round trip latency of sending an 8KB packet to the target server, printing a histogram with 100 buckets when completed:
psping -l 8k -n 10000 -h 100 192.168.2.2:5000

This command tests bandwidth to a PsPing server listening at the target IP address for 10 seconds and produces a histogram with 100 buckets. Note that the test must run for at least one second after warmup for a histogram to generate. Simply add -u to have PsPing perform a UDP bandwidth test.
psping -b -l 8k -n 10000 -h 100 192.168.2.2:5000

---------------------------

附2：

tcp_tw_recycle和tcp_timestamps导致connect失败问题

近来线上陆续出现了一些connect失败的问题，经过分析试验，最终确认和proc参数tcp_tw_recycle/tcp_timestamps相关；
1. 现象
第一个现象：模块A通过NAT网关访问服务S成功，而模块B通过NAT网关访问服务S经常性出现connect失败，抓包发现：服务S端已经收到了syn包，但没有回复synack；另外，模块A关闭了tcp timestamp，而模块B开启了tcp timestamp；
第二个现象：不同主机上的模块C（开启timestamp），通过NAT网关（1个出口ip）访问同一服务S，主机C1 connect成功，而主机C2 connect失败；

2. 分析
根据现象上述问题明显和tcp timestmap有关；查看linux 2.6.32内核源码，发现tcp_tw_recycle/tcp_timestamps都开启的条件下，60s内同一源ip主机的socket connect请求中的timestamp必须是递增的。
源码函数：tcp_v4_conn_request(),该函数是tcp层三次握手syn包的处理函数（服务端）；
源码片段：
if (tmp_opt.saw_tstamp &&
tcp_death_row.sysctl_tw_recycle &&
(dst = inet_csk_route_req(sk, req)) != NULL &&
(peer = rt_get_peer((struct rtable *)dst)) != NULL &&
peer->v4daddr == saddr) {
if (get_seconds() < peer->tcp_ts_stamp + TCP_PAWS_MSL &&
(s32)(peer->tcp_ts - req->ts_recent) >
TCP_PAWS_WINDOW) {
NET_INC_STATS_BH(sock_net(sk), LINUX_MIB_PAWSPASSIVEREJECTED);
goto drop_and_release;
}
}
tmp_opt.saw_tstamp：该socket支持tcp_timestamp
sysctl_tw_recycle：本机系统开启tcp_tw_recycle选项
TCP_PAWS_MSL：60s，该条件判断表示该源ip的上次tcp通讯发生在60s内
TCP_PAWS_WINDOW：1，该条件判断表示该源ip的上次tcp通讯的timestamp 大于 本次tcp

分析：主机client1和client2通过NAT网关（1个ip地址）访问serverN，由于timestamp时间为系统启动到当前的时间，因此，client1和client2的timestamp不相同；根据上述syn包处理源码，在tcp_tw_recycle和tcp_timestamps同时开启的条件下，timestamp大的主机访问serverN成功，而timestmap小的主机访问失败；

参数：/proc/sys/net/ipv4/tcp_timestamps - 控制timestamp选项开启/关闭
/proc/sys/net/ipv4/tcp_tw_recycle - 减少timewait socket释放的超时时间

3. 解决方法
echo 0 > /proc/sys/net/ipv4/tcp_tw_recycle;
tcp_tw_recycle默认是关闭的，有不少服务器，为了提高性能，开启了该选项；
为了解决上述问题，个人建议关闭tcp_tw_recycle选项，而不是timestamp；因为 在tcp timestamp关闭的条件下，开启tcp_tw_recycle是不起作用的；而tcp timestamp可以独立开启并起作用。
源码函数： tcp_time_wait()
源码片段：
if (tcp_death_row.sysctl_tw_recycle && tp->rx_opt.ts_recent_stamp)
recycle_ok = icsk->icsk_af_ops->remember_stamp(sk);
......

if (timeo < rto)
timeo = rto;

if (recycle_ok) {
tw->tw_timeout = rto;
} else {
tw->tw_timeout = TCP_TIMEWAIT_LEN;
if (state == TCP_TIME_WAIT)
timeo = TCP_TIMEWAIT_LEN;
}

inet_twsk_schedule(tw, &tcp_death_row, timeo,
TCP_TIMEWAIT_LEN);

timestamp和tw_recycle同时开启的条件下，timewait状态socket释放的超时时间和rto相关；否则，超时时间为TCP_TIMEWAIT_LEN，即60s；

内核说明文档 对该参数的介绍如下：
tcp_tw_recycle - BOOLEAN
Enable fast recycling TIME-WAIT sockets. Default value is 0.
It should not be changed without advice/request of technical
experts.

原文链接：http://blog.sina.com.cn/u/2015038597

-----------------------------

附2：

一.情况表现为

1.在公司内网对站点的http访问：

linux主机出现故障：curl以及抓包分析，发现服务端不响应linux客户端的请求，无法建立TCP连接，浏览器返回“无法连接到服务器”

windows主机正常

2.http访问质量下降：

基调显示，新架构上线后，访问质量下滑，主要表现为

2.1.访问提示“无法连接到服务器”

2.2.仅少数人遇到这种故障，并且一天中不是每次访问都会遇到，而是出现时好时坏的现象

二.处理过程

直接上google搜索关键字“服务器无法建立TCP连接”。

翻了几页后。

看了一下，和我们公司内网的表现一模一样，但各种问题（1为这方面基础知识薄弱，2为没有时间验证此配置）

然后这种问题持续了n久...一直以为是内部设备问题

后期搞不定了，大胆在线上启用这个参数“net.ipv4.tcp_timestamps = 0”，做了下测试后，发现故障解除，原故障机每次访问都正常了！

不过还是不明其中原理，只是大意了解，同样处于NAT上网方式的用户里（与别人共用出口IP地址），如果你的时间戳小于别人的，那么服务器不会响应你的TCP请求，要忽略此项，将net.ipv4.tcp_timestamps = 0（/etc/sysctl.conf）

三.总结

后期学习时，看见了一个更加详细的博客，讲的很详细，也引入了新的问题：

====== 小抄 ======

其实，linux服务器原本对时间戳（timestamps）默认是不开启的，Linux是否启用这种行为取决于tcp_timestamps和tcp_tw_recycle，因为tcp_timestamps缺省就是开启的，所以当tcp_tw_recycle被开启后，实际上这种行为就被激活了。

net.ipv4.tcp_tw_recycle又是啥呢，搜索了一下基本上是TIME_WAIT连接的回收参数

当 net.ipv4.tcp_timestamps 没有设置（缺省为开启），并且 net.ipv4.tcp_tw_recycle 也开启时，这个坑爹的错误就出现了，但是注意，只表现在NAT网络环境中。而且，大多数博客，以及一些大牛们，都有说过要开启 net.ipv4.tcp_tw_recycle ...

====== 小抄 ======

四.未完成的事项

1.（未验证）关闭timestamps后，tw_recycle功能是失效的问题

2.（未验证）新的解决TIME_WAIT连接过多的方法：net.ipv4.tcp_max_tw_buckets = 10000 设置一个最大值，不过坏处是系统日志会提示：TCP: time wait bucket table overflow