[李景山php]ubuntu 14.04.3 LTS 版本 通过 nginx + keepalived 配置 高可用 负载均衡集群演示
2016-09-17 21:24
801 查看
系统版本:ubuntu 14.04.3 LTS
服务器准备:
lb01—> ifconfig 显示结果: 192.168.91.136 作用:安装keepalived 及 nginx
lb02—> ifconfig 显示结果: 192.168.91.135 作用:安装keepalived 及 nginx
web01—> ifconfig 显示结果: 192.168.91.134 作用:安装nginx 负责展示 index.html页面
web02—> ifconfig 显示结果: 192.168.91.137 作用:安装nginx 负责展示 index.html页面
运行原理
1 nginx 在 web01/web02 上充当的是 web服务器
2 nginx 在 lb01 跟 lb02 上 充当的是 负载均衡的工具,使用的是 upstream 工具
3 keepalived 在lb01 跟 lb02 上进行 虚拟vip 配置
具体安装步骤:
1 在 lb01/lb02/web01/web02 上安装 nginx.
apt-get install nginx -y
2 修改 web01/web02 的默认显示页面,内容分别改成 web01 / web02
echo ‘web02’ > /usr/share/nginx/html/index.html
echo ‘web01’ > /usr/share/nginx/html/index.html
3 配置 lb01 / lb02 为 负载均衡服务器。
编辑 nginx.conf 配置文件
nano /etc/nginx/nginx.conf
并且修改分别对应的/etc/hosts 下的文件,命名为 nano /etc/hosts 新增如下:
127.0.0.1 www.jingshan.net
重启 nginx,
service nginx restart
然后用curl www.jingshan.net 进行测试,当多次测试后应该发现,会分别显示 web01 或者 web02 证明配置ok.
4 安装 keepalived;命令为 apt-get install keepalived -y
复制配置文件过去
cp /usr/share/doc/keepalived/samples/keepalived.conf.vrrp /etc/keepalived/keepalived.conf
编辑配置文件:
nano /etc/keepalived/keepalived.conf
对应的 lb01:的配置文件为:
global_defs {
notification_email {
acassen
}
notification_email_from Alexandre.Cassen@firewall.loc
smtp_server 192.168.200.1
smtp_connect_timeout 30
router_id lb01
}
vrrp_instance VI_1 {
state MASTER
interface eth0
garp_master_delay 10
smtp_alert
virtual_router_id 51
priority 100
advert_int 1
authentication {
auth_type PASS
auth_pass 1111
}
virtual_ipaddress {
# optional label. should be of the form “realdev:sometext” for
# compatibility with ifconfig.
192.168.91.188/24 label eth0:1
}
}
lb02配置文件:
global_defs {
notification_email {
acassen
}
notification_email_from Alexandre.Cassen@firewall.loc
smtp_server 192.168.200.1
smtp_connect_timeout 30
router_id lb02
}
vrrp_instance VI_1 {
state BACKUP
interface eth0
garp_master_delay 10
smtp_alert
virtual_router_id 51
priority 40
advert_int 1
authentication {
auth_type PASS
auth_pass 1111
}
virtual_ipaddress {
# optional label. should be of the form “realdev:sometext” for
# compatibility with ifconfig.
192.168.91.188/24 label eth0:1
}
}
分别重启对应的keepalived;
使用ip addr 命令检索 看看vip 是否新增成功。
如果发现了: inet 192.168.188/24 scope global secondary eth0:1
然后在你的电脑本地的Host文件修改为
192.168.91.188 www.jingshan.net
通过浏览器进行访问,如果分别显示 web01 跟 web02 就是正常的。
当 lb01 停止的时候,也可以进行 正常的显示。
服务器准备:
lb01—> ifconfig 显示结果: 192.168.91.136 作用:安装keepalived 及 nginx
lb02—> ifconfig 显示结果: 192.168.91.135 作用:安装keepalived 及 nginx
web01—> ifconfig 显示结果: 192.168.91.134 作用:安装nginx 负责展示 index.html页面
web02—> ifconfig 显示结果: 192.168.91.137 作用:安装nginx 负责展示 index.html页面
运行原理
1 nginx 在 web01/web02 上充当的是 web服务器
2 nginx 在 lb01 跟 lb02 上 充当的是 负载均衡的工具,使用的是 upstream 工具
3 keepalived 在lb01 跟 lb02 上进行 虚拟vip 配置
具体安装步骤:
1 在 lb01/lb02/web01/web02 上安装 nginx.
apt-get install nginx -y
2 修改 web01/web02 的默认显示页面,内容分别改成 web01 / web02
echo ‘web02’ > /usr/share/nginx/html/index.html
echo ‘web01’ > /usr/share/nginx/html/index.html
3 配置 lb01 / lb02 为 负载均衡服务器。
编辑 nginx.conf 配置文件
nano /etc/nginx/nginx.conf
在当前默认的配置文件新增如下: upstream backed{ server 192.168.91.134:80 weight=5; server 192.168.91.137:80 weight=5; } server{ listen 80; server_name www.jingshan.net; location / { root html; index index.html index.htm; proxy_pass http://backed; } }
并且修改分别对应的/etc/hosts 下的文件,命名为 nano /etc/hosts 新增如下:
127.0.0.1 www.jingshan.net
重启 nginx,
service nginx restart
然后用curl www.jingshan.net 进行测试,当多次测试后应该发现,会分别显示 web01 或者 web02 证明配置ok.
4 安装 keepalived;命令为 apt-get install keepalived -y
复制配置文件过去
cp /usr/share/doc/keepalived/samples/keepalived.conf.vrrp /etc/keepalived/keepalived.conf
编辑配置文件:
nano /etc/keepalived/keepalived.conf
对应的 lb01:的配置文件为:
global_defs {
notification_email {
acassen
}
notification_email_from Alexandre.Cassen@firewall.loc
smtp_server 192.168.200.1
smtp_connect_timeout 30
router_id lb01
}
vrrp_instance VI_1 {
state MASTER
interface eth0
garp_master_delay 10
smtp_alert
virtual_router_id 51
priority 100
advert_int 1
authentication {
auth_type PASS
auth_pass 1111
}
virtual_ipaddress {
# optional label. should be of the form “realdev:sometext” for
# compatibility with ifconfig.
192.168.91.188/24 label eth0:1
}
}
lb02配置文件:
global_defs {
notification_email {
acassen
}
notification_email_from Alexandre.Cassen@firewall.loc
smtp_server 192.168.200.1
smtp_connect_timeout 30
router_id lb02
}
vrrp_instance VI_1 {
state BACKUP
interface eth0
garp_master_delay 10
smtp_alert
virtual_router_id 51
priority 40
advert_int 1
authentication {
auth_type PASS
auth_pass 1111
}
virtual_ipaddress {
# optional label. should be of the form “realdev:sometext” for
# compatibility with ifconfig.
192.168.91.188/24 label eth0:1
}
}
分别重启对应的keepalived;
使用ip addr 命令检索 看看vip 是否新增成功。
如果发现了: inet 192.168.188/24 scope global secondary eth0:1
然后在你的电脑本地的Host文件修改为
192.168.91.188 www.jingshan.net
通过浏览器进行访问,如果分别显示 web01 跟 web02 就是正常的。
当 lb01 停止的时候,也可以进行 正常的显示。
相关文章推荐
- ubuntu 14.04.3 LTS 版本 通过 nginx + keepalived 配置 高可用 负载均衡集群演示
- LVS+Keepalived+Nginx+Tomcat高可用负载均衡集群配置(DR模式,一个VIP,多个端口)
- Nginx+Keepalived+Tomcat高可用负载均衡,Zookeeper集群配置,Mysql(MariaDB)搭建,Redis安装,FTP配置
- Ubuntu下配置 keepalived+nginx+tomcat 负载均衡
- Keepalived+LVS-DR模式配置高可用负载均衡集群
- 配置LVS + Keepalived高可用负载均衡集群之图文教程
- nginx+keepalived的高可用负载均衡集群构建
- Nginx+Keepalived搭建高可用负载均衡集群
- (2)LVS+Keepalived+nginx高可用负载均衡架构原理及配置
- nginx+keepalived配置双主高可用负载均衡
- Keepalived+Nginx实现高可用负载均衡集群
- 配置LVS + Keepalived高可用负载均衡集群之图文教程
- Keepalived+LVS-DR模式配置高可用负载均衡集群
- 配置LVS + Keepalived高可用负载均衡集群之图文教程
- apache+inotify-tools+keepalived+lvs-NAT模式配置高可用负载均衡集群 推荐
- Nginx+Keepalived搭建高可用负载均衡集群
- 配置LVS + Keepalived高可用负载均衡集群之图文教程
- 配置LVS+keepalived 高可用负载均衡集群
- 配置LVS + Keepalived高可用负载均衡集群之图文教程
- LVS+keepalived DR模式配置高可用负载均衡集群