转_Greenplum 数据库安装部署（生产环境）
2016-08-22 18:04
471 查看
Greenplum 数据库安装部署（生产环境）
硬件配置：
16 台 IBM X3650,
节点配置：CPU 2 * 8core，内存 128GB，硬盘 16 * 900GB，万兆网卡。
万兆交换机。
安装需求：
1台Master，1台Standby Master，14台Segment计算节点。
安装步骤：
Master节点安装
创建GP安装配置文件并配置ssh互信
关闭防火墙及开启自启动
关闭SELinux
磁盘调度算法
磁盘预读取配置
语言与字符集
Sysctl.conf增加配置
用户资源限额配置
时间校对
设定网卡自启动
创建用户(可选)
创建目录并赋权
各节点GP软件的安装
初始化GP数据库
主节点/etc/hosts文件，追加内容（万兆网卡的IP地址和主机名）：
解压安装介质
GP的安装包：/opt/db.zip
安装目录
在 XXXGPM1 节点上，将 greenplum-db-4.x.x.x-build-5-RHEL5-x86_64.zip 解开， 以 root 用户执行得到的.bin 文件。按照提示进行安装。
选择自定义安装目录： /data1/gpinstall/greenplum-db-4.3.2.0
安装完成之后，可以看到如下目录
创建两个配置文件
测试可以正常互信。此时就可以方便的去同步配置所有的参数。
先写脚本同步各节点的/etc/hosts文件：
gpssh -f /data1/gpinstall/config/allnodes.txt -e '' 回车即可进入交互性界面。
临时关闭SELinux和永久禁用SELinux：
原厂给的设置方法：
修改/boot/grub/menu.lst 找到 kernel /vmlinuz-xxx 这一行，在最后添加 elevator=deadline
检查/验证方法：
系统启动正常后，执行 cat /sys/block/*/queue/scheduler 应能看到： noop anticipatory [deadline] cfq
实际遇到问题：RHEL6.5系统 没有/boot/grub/menu.lst 这个文件。
nl /boot/grub/menu.lst
换一个思路，利用rc.local配置加两行信息如下：
这里为了快速同步集群的配置统一，将这两行写入临时配置文件/tmp/gpconfig/1deadline.conf,然后同步到各节点。
最后在交互性界面执行命令：
blockdev --getra /dev/sd* blockdev --getra /dev/dm-*
设置办法：
修改/etc/rc.d/rc.local 增加两行
检查办法：
系统重启后，运行
/etc/rc.d/rc.local
设置办法：系统安装时指定。
检查办法：登录系统，执行命令 locale 结果应该是 en_US.UTF-8
修改：
sysctl -p
有时需要 modprobe bridge
设置办法： 修改/etc/sysctl.conf,
增加以下内容：
然后执行 sysctl -p。
检查办法： 用 sysctl ，检查上述各参数是否匹配。
ulimit -a
设置办法：
修改 /etc/security/limits.d/90-nproc.conf
Replace with：
同步修改：
检查办法： 用任意普通用户登录，执行 ulimit -a，检查上述参数是否匹配。
date
校对时间：
--2015年6月5日9:17
修改eth2网卡配置，开启自启动
以上步骤修改完毕后统一重启下机器，再次验证以上各个步骤是否修改成功。
写一个小脚本，分发到各节点，然后在交互式界面下统一执行脚本建立组，用户，密码：
数据库数据文件存储目录：
注意这里配置文件变为nodes.txt,主节点并不需要创建这些目录。
如果前面没有手工提前建立gpadmin用户，这里可以指定用户密码(-u -p)，统一建立gpadmin用户和密码
cd /data1/gpinstall/config
新建gpinitsystem_config配置文件，内容如下：
调整方法：执行命令 gpconfig -c 参数名 -v 参数值 -m Master节���值
检查方法：重启数据库后，执行命令 gpconfig -s 参数名
参数名 参数值 master节点值
gpconfig -s gp_vmem_protect_limit
gpconfig -s max_connections
gpconfig -s wal_send_client_timeout
psql postgres
psql XXX
增加一行：
修改standby master上的文件 $MASTER_DATA_DIRECTORY/pg_hba.conf
增加一行：
硬件配置：
16 台 IBM X3650,
节点配置：CPU 2 * 8core，内存 128GB，硬盘 16 * 900GB，万兆网卡。
万兆交换机。
安装需求：
1台Master，1台Standby Master，14台Segment计算节点。
安装步骤：
Master节点安装
创建GP安装配置文件并配置ssh互信
关闭防火墙及开启自启动
关闭SELinux
磁盘调度算法
磁盘预读取配置
语言与字符集
Sysctl.conf增加配置
用户资源限额配置
时间校对
设定网卡自启动
创建用户(可选)
创建目录并赋权
各节点GP软件的安装
初始化GP数据库
1. Master节点安装
先确认各节点目录结构保持一致：[root@XXXGPM01 db]# df -h Filesystem Size Used Avail Use% Mounted on /dev/sda6 20G 440M 18G 3% / tmpfs 63G 76K 63G 1% /dev/shm /dev/sda2 485M 39M 421M 9% /boot /dev/sda1 200M 260K 200M 1% /boot/efi /dev/sda4 5.5T 3.1G 5.5T 1% /data1 /dev/sdb1 5.8T 34M 5.8T 1% /data2 /dev/sda8 9.7G 150M 9.0G 2% /home /dev/sda5 49G 3.1G 43G 7% /opt /dev/sda9 9.7G 151M 9.0G 2% /tmp /dev/sda7 20G 5.8G 13G 32% /usr /dev/sda10 9.7G 338M 8.8G 4% /var
主节点/etc/hosts文件，追加内容（万兆网卡的IP地址和主机名）：
172.16.99.18 XXXGPM01 172.16.99.19 XXXGPM02 172.16.99.20 XXXGPD01 172.16.99.21 XXXGPD02 172.16.99.22 XXXGPD03 172.16.99.23 XXXGPD04 172.16.99.24 XXXGPD05 172.16.99.25 XXXGPD06 172.16.99.26 XXXGPD07 172.16.99.27 XXXGPD08 172.16.99.28 XXXGPD09 172.16.99.29 XXXGPD10 172.16.99.30 XXXGPD11 172.16.99.31 XXXGPD12 172.16.99.32 XXXGPD13 172.16.99.33 XXXGPD14
解压安装介质
GP的安装包：/opt/db.zip
cd /data1; unzip /opt/db.zip
安装目录
mkdir -p /data1/gpinstall
在 XXXGPM1 节点上，将 greenplum-db-4.x.x.x-build-5-RHEL5-x86_64.zip 解开， 以 root 用户执行得到的.bin 文件。按照提示进行安装。
# /bin/bash greenplum-db-4.3.2.0-build-1-RHEL5-x86_64.bin
选择自定义安装目录： /data1/gpinstall/greenplum-db-4.3.2.0
安装完成之后，可以看到如下目录
[root@XXXGPM01 gpinstall]# pwd /data1/gpinstall [root@XXXGPM01 gpinstall]# ls -lh 总用量 4.0K lrwxrwxrwx. 1 root root 22 6月 4 18:51 greenplum-db -> ./greenplum-db-4.3.2.0 drwxr-xr-x. 11 root root 4.0K 6月 4 18:51 greenplum-db-4.3.2.0
2. 创建GP安装配置文件并配置ssh互信
mkdir -p /data1/gpinstall/config
创建两个配置文件
1. allnodes.txt
XXXGPM01 XXXGPM02 XXXGPD01 XXXGPD02 XXXGPD03 XXXGPD04 XXXGPD05 XXXGPD06 XXXGPD07 XXXGPD08 XXXGPD09 XXXGPD10 XXXGPD11 XXXGPD12 XXXGPD13 XXXGPD14
2. nodes.txt
XXXGPD01 XXXGPD02 XXXGPD03 XXXGPD04 XXXGPD05 XXXGPD06 XXXGPD07 XXXGPD08 XXXGPD09 XXXGPD10 XXXGPD11 XXXGPD12 XXXGPD13 XXXGPD14
3. 配置所有GP节点root用户的ssh互信：
source /data1/gpinstall/greenplum-db/greenplum_path.sh gpssh-exkeys -f /data1/gpinstall/config/allnodes.txt
测试可以正常互信。此时就可以方便的去同步配置所有的参数。
先写脚本同步各节点的/etc/hosts文件：
#!/bin/bash #Usage: copy files to other hosts in cluster. #ex: sh bulkcp.sh /etc/hosts /etc/hosts #Author: AlfredZhao #Version: 1.0.0 for((i=18;i<=33;i++)) do scp $1 172.16.99.$i:$2 echo "scp $1 172.16.99.$i:$2" done
gpssh -f /data1/gpinstall/config/allnodes.txt -e '' 回车即可进入交互性界面。
3. 关闭防火墙及开启自启动
检查是否关闭及开机启动项设置：service iptables status service ip6tables status service libvirtd status service iptables stop service ip6tables stop service libvirtd stop chkconfig libvirtd off chkconfig iptables off chkconfig ip6tables off
4. 关闭SELinux
检查SELinux的当前状态和配置：getenforce more /etc/selinux/config | grep SELINUX=
临时关闭SELinux和永久禁用SELinux：
setenforce 0 sed -i 's/SELINUX=enforcing/SELINUX=disabled/g' /etc/selinux/config
5. 磁盘调度算法
检查当前的磁盘调度算法：cat /sys/block/sd*/queue/scheduler
原厂给的设置方法：
修改/boot/grub/menu.lst 找到 kernel /vmlinuz-xxx 这一行，在最后添加 elevator=deadline
检查/验证方法：
系统启动正常后，执行 cat /sys/block/*/queue/scheduler 应能看到： noop anticipatory [deadline] cfq
实际遇到问题：RHEL6.5系统 没有/boot/grub/menu.lst 这个文件。
nl /boot/grub/menu.lst
换一个思路，利用rc.local配置加两行信息如下：
echo deadline > /sys/block/sda/queue/scheduler echo deadline > /sys/block/sdb/queue/scheduler
这里为了快速同步集群的配置统一，将这两行写入临时配置文件/tmp/gpconfig/1deadline.conf,然后同步到各节点。
mkdir -p /tmp/gpconfig
最后在交互性界面执行命令：
cat /tmp/gpconfig/1deadline.conf >> /etc/rc.d/rc.local
6. 磁盘预读取配置
检查磁盘预读取设置，应都是 16384：blockdev --getra /dev/sd* blockdev --getra /dev/dm-*
设置办法：
修改/etc/rc.d/rc.local 增加两行
blockdev --setra 16384 /dev/sd* blockdev --setra 16384 /dev/dm-*
检查办法：
系统重启后，运行
blockdev --getra /dev/sd* blockdev --getra /dev/dm-*应都是 16384
/etc/rc.d/rc.local
sh bulkcp.sh /tmp/gpconfig/2rclocal.conf /tmp/gpconfig/2rclocal.conf
gpssh -f /data1/gpinstall/config/allnodes.txt -e ''
cat /tmp/gpconfig/2rclocal.conf >> /etc/rc.d/rc.local
7. 语言与字符集
检查语言和字符集：echo $LANGen_US.UTF-8
设置办法：系统安装时指定。
检查办法：登录系统，执行命令 locale 结果应该是 en_US.UTF-8
修改：
sed -i 's/zh_CN.UTF-8/en_US.UTF-8/g' /etc/sysconfig/i18n
8. Sysctl.conf增加配置
配置sysctl.confsysctl -p
有时需要 modprobe bridge
设置办法： 修改/etc/sysctl.conf,
增加以下内容：
net.ipv4.ip_forward = 0 net.ipv4.conf.default.accept_source_route = 0 kernel.sysrq = 0 kernel.core_uses_pid = 1 net.ipv4.tcp_syncookies = 1 kernel.msgmnb = 65536 kernel.msgmax = 65536 kernel.sem = 250 64000 100 2048 kernel.shmmax = 5000000000 kernel.shmmni = 40960 kernel.shmall = 40000000000 net.ipv4.tcp_tw_recycle=1 net.ipv4.tcp_max_syn_backlog=4096 net.core.netdev_max_backlog=10000 vm.overcommit_memory=2 net.ipv4.conf.all.arp_filter = 1 net.ipv4.ip_local_port_range = 1025 65535
然后执行 sysctl -p。
vi /tmp/gpconfig/4sysctl.conf sh bulckcp.sh /tmp/gpconfig/4sysctl.conf /tmp/gpconfig/4sysctl.conf gpssh -f /data1/gpinstall/config/allnodes.txt -e '' cat /tmp/gpconfig/4sysctl.conf >> /etc/sysctl.conf
检查办法： 用 sysctl ，检查上述各参数是否匹配。
9. 用户资源限额配置
查看用户资源限额：ulimit -a
设置办法：
修改 /etc/security/limits.d/90-nproc.conf
Replace with：
* soft nofile 1048576 * hard nofile 1048576 * soft nproc 1048576 * hard nproc 1048576
同步修改：
vi /tmp/gpconfig/5limits.conf sh bulkcp.sh /tmp/gpconfig/5limits.conf /tmp/gpconfig/5limits.conf nl /etc/security/limits.d/90-nproc.conf cat /tmp/gpconfig/5limits.conf >> /etc/security/limits.d/90-nproc.conf
检查办法： 用任意普通用户登录，执行 ulimit -a，检查上述参数是否匹配。
10. 时间校对
检查时间：date
校对时间：
--2015年6月5日9:17
date 060509172015
hwclock -w
11. 设定网卡自启动
确定需要启用的网卡：eth2ifconfig eth2 | grep 172
more /etc/sysconfig/network-scripts/ifcfg-eth2 |grep ONBOOT
修改eth2网卡配置，开启自启动
sed -i 's/ONBOOT=no/ONBOOT=yes/g' /etc/sysconfig/network-scripts/ifcfg-eth2
以上步骤修改完毕后统一重启下机器，再次验证以上各个步骤是否修改成功。
12. 创建用户(可选)
这个也可以在gpseginstall时指定选项创建，这里为了规范业务用户的uid和gid事先先创建好组和用户：写一个小脚本，分发到各节点，然后在交互式界面下统一执行脚本建立组，用户，密码：
#!/bin/bash #Usage: create gpadmin #Author: AlfredZhao #version: 1.0.0 groupadd gpadmin -g 3030 useradd gpadmin -u 3030 -g 3030 passwd gpadmin <<EOF > gpadminpwd > gpadminpwd > EOF
13. 创建目录并赋权
Master 目录：gpssh -h XXXGPM01 -e 'mkdir -p /data1/master' gpssh -h XXXGPM02 -e 'mkdir -p /data1/master' gpssh -h XXXGPM01 -e 'chown gpadmin:gpadmin /data1/master' gpssh -h XXXGPM02 -e 'chown gpadmin:gpadmin /data1/master'
数据库数据文件存储目录：
注意这里配置文件变为nodes.txt,主节点并不需要创建这些目录。
gpssh -f /data1/gpinstall/config/nodes.txt -e '' mkdir -p /data1/primary mkdir -p /data1/mirror mkdir -p /data2/primary mkdir -p /data2/mirror chown gpadmin:gpadmin /data1/primary chown gpadmin:gpadmin /data1/mirror chown gpadmin:gpadmin /data2/primary chown gpadmin:gpadmin /data2/mirror
14. 各节点GP软件的安装
gpseginstall -f allnodes.txt -c csv
如果前面没有手工提前建立gpadmin用户，这里可以指定用户密码(-u -p)，统一建立gpadmin用户和密码
[root@XXXGPM01 data1]# gpseginstall -f /data1/gpinstall/config/allnodes.txt -c csv 20150605:00:01:07:005656 gpseginstall:XXXGPM01:root-[INFO]:-Installation Info: link_name greenplum-db binary_path /data1/gpinstall/greenplum-db-4.3.2.0 binary_dir_location /data1/gpinstall binary_dir_name greenplum-db-4.3.2.0 20150605:00:01:07:005656 gpseginstall:XXXGPM01:root-[INFO]:-check cluster password access 20150605:00:01:11:005656 gpseginstall:XXXGPM01:root-[INFO]:-de-duplicate hostnames 20150605:00:01:11:005656 gpseginstall:XXXGPM01:root-[INFO]:-master hostname: XXXGPM01 20150605:00:01:13:005656 gpseginstall:XXXGPM01:root-[INFO]:-chown -R gpadmin:gpadmin /data1/gpinstall/greenplum-db 20150605:00:01:13:005656 gpseginstall:XXXGPM01:root-[INFO]:-chown -R gpadmin:gpadmin /data1/gpinstall/greenplum-db-4.3.2.0 20150605:00:01:14:005656 gpseginstall:XXXGPM01:root-[INFO]:-rm -f /data1/gpinstall/greenplum-db-4.3.2.0.tar; rm -f /data1/gpinstall/greenplum-db-4.3.2.0.tar.gz 20150605:00:01:14:005656 gpseginstall:XXXGPM01:root-[INFO]:-cd /data1/gpinstall; tar cf greenplum-db-4.3.2.0.tar greenplum-db-4.3.2.0 20150605:00:01:17:005656 gpseginstall:XXXGPM01:root-[INFO]:-gzip /data1/gpinstall/greenplum-db-4.3.2.0.tar 20150605:00:01:36:005656 gpseginstall:XXXGPM01:root-[INFO]:-remote command: mkdir -p /data1/gpinstall 20150605:00:01:37:005656 gpseginstall:XXXGPM01:root-[INFO]:-remote command: rm -rf /data1/gpinstall/greenplum-db-4.3.2.0 20150605:00:01:39:005656 gpseginstall:XXXGPM01:root-[INFO]:-scp software to remote location 20150605:00:01:41:005656 gpseginstall:XXXGPM01:root-[INFO]:-remote command: gzip -f -d /data1/gpinstall/greenplum-db-4.3.2.0.tar.gz 20150605:00:01:46:005656 gpseginstall:XXXGPM01:root-[INFO]:-md5 check on remote location 20150605:00:01:48:005656 gpseginstall:XXXGPM01:root-[INFO]:-remote command: cd /data1/gpinstall; tar xf greenplum-db-4.3.2.0.tar 20150605:00:01:51:005656 gpseginstall:XXXGPM01:root-[INFO]:-remote command: rm -f /data1/gpinstall/greenplum-db-4.3.2.0.tar 20150605:00:01:52:005656 gpseginstall:XXXGPM01:root-[INFO]:-remote command: cd /data1/gpinstall; rm -f greenplum-db; ln -fs greenplum-db-4.3.2.0 greenplum-db 20150605:00:01:54:005656 gpseginstall:XXXGPM01:root-[INFO]:-remote command: chown -R gpadmin:gpadmin /data1/gpinstall/greenplum-db 20150605:00:01:55:005656 gpseginstall:XXXGPM01:root-[INFO]:-remote command: chown -R gpadmin:gpadmin /data1/gpinstall/greenplum-db-4.3.2.0 20150605:00:01:57:005656 gpseginstall:XXXGPM01:root-[INFO]:-rm -f /data1/gpinstall/greenplum-db-4.3.2.0.tar.gz 20150605:00:01:57:005656 gpseginstall:XXXGPM01:root-[INFO]:-version string on master: gpssh version 4.3.2.0 build 1 20150605:00:01:57:005656 gpseginstall:XXXGPM01:root-[INFO]:-remote command: . /data1/gpinstall/greenplum-db/./greenplum_path.sh; /data1/gpinstall/greenplum-db/./bin/gpssh --version 20150605:00:01:59:005656 gpseginstall:XXXGPM01:root-[INFO]:-remote command: . /data1/gpinstall/greenplum-db-4.3.2.0/greenplum_path.sh; /data1/gpinstall/greenplum-db-4.3.2.0/bin/gpssh --version 20150605:00:02:06:005656 gpseginstall:XXXGPM01:root-[INFO]:-SUCCESS -- Requested commands completed
15. 初始化GP数据库
以下工作，在Master节点上以gpadmin用户登陆完成。cd /data1/gpinstall/config
新建gpinitsystem_config配置文件，内容如下：
ARRAY_NAME="XXXGPDB" SEG_PREFIX=gpseg PORT_BASE=40000 declare -a DATA_DIRECTORY=(/data1/primary /data1/primary /data1/primary /data1/primary /data1/primary /data1/primary /data2/primary /data2/primary /data2/primary /data2/primary /data2/primary /data2/primary) MASTER_HOSTNAME=XXXGPM01 MASTER_DIRECTORY=/data1/master MASTER_PORT=5432 TRUSTED_SHELL=ssh CHECK_POINT_SEGMENTS=256 ENCODING=UNICODE MIRROR_PORT_BASE=50000 REPLICATION_PORT_BASE=41000 MIRROR_REPLICATION_PORT_BASE=51000 declare -a MIRROR_DATA_DIRECTORY=(/data1/mirror /data1/mirror /data1/mirror /data1/mirror /data1/mirror /data1/mirror /data2/mirror /data2/mirror /data2/mirror /data2/mirror /data2/mirror /data2/mirror)
15.1 配置下gpadmin用户的各节点间互信：
gpssh-exkeys -f /data1/gpinstall/config/allnodes.txt
15.2 初始化数据库：
gpinitsystem -c gpinitsystem_config -h nodes.txt -B 8
15.3 配置环境变量：
source /usr/local/greenplum-db/greenplum_path.sh export MASTER_DATA_DIRECTORY=/data1/master/gpseg-1
15.4 建立冗余的master节点：
gpinitstandby -s XXXGPM02
15.5 调整数据库参数：
以下数据库参数调整后必须重新启动数据库。调整方法：执行命令 gpconfig -c 参数名 -v 参数值 -m Master节���值
检查方法：重启数据库后，执行命令 gpconfig -s 参数名
参数名 参数值 master节点值
gpconfig -c shared_buffers -v 128MB -m 128MB gpconfig -c gp_vmem_protect_limit -v 15360 -m 15360 gpconfig -c max_connections -v 1000 -m 200 gpconfig --skipvalidation -c wal_send_client_timeout -v 60s -m 60s [gpadmin@XXXGPM01 greenplum-db]$ gpconfig -c shared_buffers -v 128MB -m 128MB 20150605:14:50:53:017038 gpconfig:XXXGPM01:gpadmin-[INFO]:-completed successfully [gpadmin@XXXGPM01 greenplum-db]$ gpconfig -c gp_vmem_protect_limit -v 15360 -m 15360 20150605:14:52:51:017179 gpconfig:XXXGPM01:gpadmin-[INFO]:-completed successfully [gpadmin@XXXGPM01 greenplum-db]$ gpconfig -c max_connections -v 1000 -m 200 20150605:14:53:08:017271 gpconfig:XXXGPM01:gpadmin-[INFO]:-completed successfully [gpadmin@XXXGPM01 greenplum-db]$ gpconfig --skipvalidation -c wal_send_client_timeout -v 60s -m 60s 20150605:14:53:23:017363 gpconfig:XXXGPM01:gpadmin-[INFO]:-completed successfully
15.6 关闭数据库
[gpadmin@XXXGPM01 greenplum-db]$ gpstop -a 20150605:14:54:40:017533 gpstop:XXXGPM01:gpadmin-[INFO]:-Starting gpstop with args: -a 20150605:14:54:40:017533 gpstop:XXXGPM01:gpadmin-[INFO]:-Gathering information and validating the environment... 20150605:14:54:40:017533 gpstop:XXXGPM01:gpadmin-[INFO]:-Obtaining Greenplum Master catalog information 20150605:14:54:40:017533 gpstop:XXXGPM01:gpadmin-[INFO]:-Obtaining Segment details from master... 20150605:14:54:42:017533 gpstop:XXXGPM01:gpadmin-[INFO]:-Greenplum Version: 'postgres (Greenplum Database) 4.3.2.0 build 1' 20150605:14:54:42:017533 gpstop:XXXGPM01:gpadmin-[INFO]:-There are 0 connections to the database 20150605:14:54:42:017533 gpstop:XXXGPM01:gpadmin-[INFO]:-Commencing Master instance shutdown with mode='smart' 20150605:14:54:42:017533 gpstop:XXXGPM01:gpadmin-[INFO]:-Master host=XXXGPM01 20150605:14:54:42:017533 gpstop:XXXGPM01:gpadmin-[INFO]:-Commencing Master instance shutdown with mode=smart 20150605:14:54:42:017533 gpstop:XXXGPM01:gpadmin-[INFO]:-Master segment instance directory=/data1/master/gpseg-1 20150605:14:54:43:017533 gpstop:XXXGPM01:gpadmin-[INFO]:-Stopping master standby host XXXGPM02 mode=fast 20150605:14:54:45:017533 gpstop:XXXGPM01:gpadmin-[INFO]:-Successfully shutdown standby process on XXXGPM02 20150605:14:54:45:017533 gpstop:XXXGPM01:gpadmin-[INFO]:-Commencing parallel primary segment instance shutdown, please wait... ........................... 20150605:14:55:12:017533 gpstop:XXXGPM01:gpadmin-[INFO]:-Commencing parallel mirror segment instance shutdown, please wait... ................ 20150605:14:55:28:017533 gpstop:XXXGPM01:gpadmin-[INFO]:----------------------------------------------------- 20150605:14:55:28:017533 gpstop:XXXGPM01:gpadmin-[INFO]:- Segments stopped successfully = 336 20150605:14:55:28:017533 gpstop:XXXGPM01:gpadmin-[INFO]:- Segments with errors during stop = 0 20150605:14:55:28:017533 gpstop:XXXGPM01:gpadmin-[INFO]:----------------------------------------------------- 20150605:14:55:28:017533 gpstop:XXXGPM01:gpadmin-[INFO]:-Successfully shutdown 336 of 336 segment instances 20150605:14:55:28:017533 gpstop:XXXGPM01:gpadmin-[INFO]:-Database successfully shutdown with no errors reported
15.7 启动数据库：
[gpadmin@XXXGPM01 greenplum-db]$ gpstart -a 20150605:14:56:39:017669 gpstart:XXXGPM01:gpadmin-[INFO]:-Starting gpstart with args: -a 20150605:14:56:39:017669 gpstart:XXXGPM01:gpadmin-[INFO]:-Gathering information and validating the environment... 20150605:14:56:39:017669 gpstart:XXXGPM01:gpadmin-[INFO]:-Greenplum Binary Version: 'postgres (Greenplum Database) 4.3.2.0 build 1' 20150605:14:56:39:017669 gpstart:XXXGPM01:gpadmin-[INFO]:-Greenplum Catalog Version: '201310150' 20150605:14:56:39:017669 gpstart:XXXGPM01:gpadmin-[INFO]:-Starting Master instance in admin mode 20150605:14:56:40:017669 gpstart:XXXGPM01:gpadmin-[INFO]:-Obtaining Greenplum Master catalog information 20150605:14:56:40:017669 gpstart:XXXGPM01:gpadmin-[INFO]:-Obtaining Segment details from master... 20150605:14:56:42:017669 gpstart:XXXGPM01:gpadmin-[INFO]:-Setting new master era 20150605:14:56:42:017669 gpstart:XXXGPM01:gpadmin-[INFO]:-Master Started... 20150605:14:56:42:017669 gpstart:XXXGPM01:gpadmin-[INFO]:-Shutting down master 20150605:14:56:46:017669 gpstart:XXXGPM01:gpadmin-[INFO]:-Commencing parallel primary and mirror segment instance startup, please wait... .................. 20150605:14:57:04:017669 gpstart:XXXGPM01:gpadmin-[INFO]:-Process results... 20150605:14:57:04:017669 gpstart:XXXGPM01:gpadmin-[INFO]:----------------------------------------------------- 20150605:14:57:04:017669 gpstart:XXXGPM01:gpadmin-[INFO]:- Successful segment starts = 336 20150605:14:57:04:017669 gpstart:XXXGPM01:gpadmin-[INFO]:- Failed segment starts = 0 20150605:14:57:04:017669 gpstart:XXXGPM01:gpadmin-[INFO]:- Skipped segment starts (segments are marked down in configuration) = 0 20150605:14:57:04:017669 gpstart:XXXGPM01:gpadmin-[INFO]:----------------------------------------------------- 20150605:14:57:04:017669 gpstart:XXXGPM01:gpadmin-[INFO]:- 20150605:14:57:04:017669 gpstart:XXXGPM01:gpadmin-[INFO]:-Successfully started 336 of 336 segment instances 20150605:14:57:04:017669 gpstart:XXXGPM01:gpadmin-[INFO]:----------------------------------------------------- 20150605:14:57:04:017669 gpstart:XXXGPM01:gpadmin-[INFO]:-Starting Master instance XXXGPM01 directory /data1/master/gpseg-1 20150605:14:57:05:017669 gpstart:XXXGPM01:gpadmin-[INFO]:-Command pg_ctl reports Master XXXGPM01 instance active 20150605:14:57:06:017669 gpstart:XXXGPM01:gpadmin-[INFO]:-Starting standby master 20150605:14:57:06:017669 gpstart:XXXGPM01:gpadmin-[INFO]:-Checking if standby master is running on host: XXXGPM02 in directory: /data1/master/gpseg-1 20150605:14:57:09:017669 gpstart:XXXGPM01:gpadmin-[INFO]:-Database successfully started [gpadmin@XXXGPM01 greenplum-db]$
15.8 检查数据库的参数
gpconfig -s shared_buffersgpconfig -s gp_vmem_protect_limit
gpconfig -s max_connections
gpconfig -s wal_send_client_timeout
[gpadmin@XXXGPM01 greenplum-db]$ gpconfig -s shared_buffers
20150605:11:37:40:011591 gpconfig:XXXGPM01:gpadmin-[ERROR]:-Failed to retrieve GUC information: error 'ERROR: function gp_toolkit.gp_param_setting(unknown) does not exist
LINE 1: select * from gp_toolkit.gp_param_setting('shared_buffers')
^
HINT: No function matches the given name and argument types. You may need to add explicit type casts.
' in 'select * from gp_toolkit.gp_param_setting('shared_buffers')'psql postgres
show shared_buffers; show gp_vmem_protect_limit; show max_connections; show wal_send_client_timeout;
15.9 创建业务数据库XXX
项目内规范：所有后期创建数据库，都必须在psql 登陆到postgres数据库后创建！！psql postgres postgres=# create database XXX; CREATE DATABASE
psql XXX
15.10 调整连接控制参数
修改文件 $MASTER_DATA_DIRECTORY/pg_hba.conf增加一行：
host all all 0/0 md5
修改standby master上的文件 $MASTER_DATA_DIRECTORY/pg_hba.conf
增加一行：
host all all 0/0 md5
15.11 查看数据库的状态(gpstate)
[gpadmin@XXXGPM01 ~]$ gpstate 20150605:13:48:23:015288 gpstate:XXXGPM01:gpadmin-[INFO]:-Starting gpstate with args: 20150605:13:48:24:015288 gpstate:XXXGPM01:gpadmin-[INFO]:-local Greenplum Version: 'postgres (Greenplum Database) 4.3.2.0 build 1' 20150605:13:48:24:015288 gpstate:XXXGPM01:gpadmin-[INFO]:-master Greenplum Version: 'PostgreSQL 8.2.15 (Greenplum Database 4.3.2.0 build 1) on x86_64-unknown-linux-gnu, compiled by GCC gcc (GCC) 4.4.2 compiled on Jul 12 2014 17:02:40' 20150605:13:48:24:015288 gpstate:XXXGPM01:gpadmin-[INFO]:-Obtaining Segment details from master... 20150605:13:48:25:015288 gpstate:XXXGPM01:gpadmin-[INFO]:-Gathering data from segments... ................ 20150605:13:48:41:015288 gpstate:XXXGPM01:gpadmin-[INFO]:-Greenplum instance status summary 20150605:13:48:41:015288 gpstate:XXXGPM01:gpadmin-[INFO]:----------------------------------------------------- 20150605:13:48:41:015288 gpstate:XXXGPM01:gpadmin-[INFO]:- Master instance = Active 20150605:13:48:41:015288 gpstate:XXXGPM01:gpadmin-[INFO]:- Master standby = XXXGPM02 20150605:13:48:41:015288 gpstate:XXXGPM01:gpadmin-[INFO]:- Standby master state = Standby host passive 20150605:13:48:41:015288 gpstate:XXXGPM01:gpadmin-[INFO]:- Total segment instance count from metadata = 336 20150605:13:48:41:015288 gpstate:XXXGPM01:gpadmin-[INFO]:----------------------------------------------------- 20150605:13:48:41:015288 gpstate:XXXGPM01:gpadmin-[INFO]:- Primary Segment Status 20150605:13:48:41:015288 gpstate:XXXGPM01:gpadmin-[INFO]:----------------------------------------------------- 20150605:13:48:41:015288 gpstate:XXXGPM01:gpadmin-[INFO]:- Total primary segments = 168 20150605:13:48:41:015288 gpstate:XXXGPM01:gpadmin-[INFO]:- Total primary segment valid (at master) = 168 20150605:13:48:41:015288 gpstate:XXXGPM01:gpadmin-[INFO]:- Total primary segment failures (at master) = 0 20150605:13:48:41:015288 gpstate:XXXGPM01:gpadmin-[INFO]:- Total number of postmaster.pid files missing = 0 20150605:13:48:41:015288 gpstate:XXXGPM01:gpadmin-[INFO]:- Total number of postmaster.pid files found = 168 20150605:13:48:41:015288 gpstate:XXXGPM01:gpadmin-[INFO]:- Total number of postmaster.pid PIDs missing = 0 20150605:13:48:41:015288 gpstate:XXXGPM01:gpadmin-[INFO]:- Total number of postmaster.pid PIDs found = 168 20150605:13:48:41:015288 gpstate:XXXGPM01:gpadmin-[INFO]:- Total number of /tmp lock files missing = 0 20150605:13:48:41:015288 gpstate:XXXGPM01:gpadmin-[INFO]:- Total number of /tmp lock files found = 168 20150605:13:48:41:015288 gpstate:XXXGPM01:gpadmin-[INFO]:- Total number postmaster processes missing = 0 20150605:13:48:41:015288 gpstate:XXXGPM01:gpadmin-[INFO]:- Total number postmaster processes found = 168 20150605:13:48:41:015288 gpstate:XXXGPM01:gpadmin-[INFO]:----------------------------------------------------- 20150605:13:48:41:015288 gpstate:XXXGPM01:gpadmin-[INFO]:- Mirror Segment Status 20150605:13:48:41:015288 gpstate:XXXGPM01:gpadmin-[INFO]:----------------------------------------------------- 20150605:13:48:41:015288 gpstate:XXXGPM01:gpadmin-[INFO]:- Total mirror segments = 168 20150605:13:48:41:015288 gpstate:XXXGPM01:gpadmin-[INFO]:- Total mirror segment valid (at master) = 168 20150605:13:48:41:015288 gpstate:XXXGPM01:gpadmin-[INFO]:- Total mirror segment failures (at master) = 0 20150605:13:48:41:015288 gpstate:XXXGPM01:gpadmin-[INFO]:- Total number of postmaster.pid files missing = 0 20150605:13:48:41:015288 gpstate:XXXGPM01:gpadmin-[INFO]:- Total number of postmaster.pid files found = 168 20150605:13:48:41:015288 gpstate:XXXGPM01:gpadmin-[INFO]:- Total number of postmaster.pid PIDs missing = 0 20150605:13:48:41:015288 gpstate:XXXGPM01:gpadmin-[INFO]:- Total number of postmaster.pid PIDs found = 168 20150605:13:48:41:015288 gpstate:XXXGPM01:gpadmin-[INFO]:- Total number of /tmp lock files missing = 0 20150605:13:48:41:015288 gpstate:XXXGPM01:gpadmin-[INFO]:- Total number of /tmp lock files found = 168 20150605:13:48:41:015288 gpstate:XXXGPM01:gpadmin-[INFO]:- Total number postmaster processes missing = 0 20150605:13:48:41:015288 gpstate:XXXGPM01:gpadmin-[INFO]:- Total number postmaster processes found = 168 20150605:13:48:41:015288 gpstate:XXXGPM01:gpadmin-[INFO]:- Total number mirror segments acting as primary segments = 0 20150605:13:48:41:015288 gpstate:XXXGPM01:gpadmin-[INFO]:- Total number mirror segments acting as mirror segments = 168 20150605:13:48:41:015288 gpstate:XXXGPM01:gpadmin-[INFO]:----------------------------------------------------- [gpadmin@XXXGPM01 ~]$
内容来自用户分享和网络整理，不保证内容的准确性，如有侵权内容，可联系管理员处理 
相关文章推荐
- Greenplum 数据库 集群安装部署（生产环境） 所需硬件
- Greenplum 数据库安装部署（生产环境）
- golden gate 生产环境的安装部署之抽取进程
- 生产环境下戴尔 R820 kvm虚拟化部署三（virt-manager图形化安装kvm虚拟机）
- 生产环境上的HADOOP安装部署注意事项(HDP版)
- 云主机-生产环境下离线安装Docker部署应用
- 生产环境上的HADOOP安装部署注意事项(HDP版)
- 生产环境Cobbler安装服务器部署实战
- 生产环境上的HADOOP安装部署注意事项(HDP版)
- 生产环境上的HADOOP安装部署注意事项(HDP版)
- 生产环境上的HADOOP安装部署注意事项(HDP版)
- 生产环境上的HADOOP安装部署注意事项(HDP版)
- 生产环境实战spark （11）分布式集群 5台设备 Zookeeper集群、Kafka集群安装部署
- 生产环境上的HADOOP安装部署注意事项(HDP版)
- golden gate 生产环境的安装部署之管理进程
- 生产环境下戴尔 R820 kvm虚拟化部署一（centos6.6 kvm物理机安装）
- 生产环境上的HADOOP安装部署注意事项(HDP版)
- 生产环境上的HADOOP安装部署注意事项(HDP版)
- 生产环境上的HADOOP安装部署注意事项(HDP版)
- 生产环境上的HADOOP安装部署注意事项(HDP版)