配置——Nginx配置文件解析
2016-08-18 20:45
447 查看
一. 配置文件结构
二. 全局块详解
#定义nginx运行的用户和用户组
user www www;
#定义nginx进程数(建议设置为CPU数)
worker_processes 8;
#全局错误日志定义类型(错误日志类型:[debug|info|notice|warn|error|crit],从左到右错误信息越来越少;此指令可以在全局、http、server、location块中配置)
error_log /var/log/nginx/error.log info;
#定义进程文件
pid /var/run/nginx.pid;
三. events块详解
#定义工作模式
use epoll
#连接数上限(单个进程的最大连接数,web服务器的最大访问用户数 max clients = worker_processes *
worker_connections)
worker_connections 1024
#网络连接序列化(为了避免唤醒太多的进程数,会影响系统性能)
accept_mutex on
#工作进程是否允许同时接收多个网络连接
multi_accept on
四. http块详解
#设定mime类型(MIME-Type类型由mime.type文件定义)
include /etc/nginx/mime.types;
default_type application/octet-stream;
#默认编码
charset utf-8;
#定义服务器日志(此处的日志与常规的不同,它记录的是nginx服务器提供服务过程中应答前端请求的日志)
access_log /var/log/nginx/access.log combined;
log_format combined '$remote_addr
- $remote_user [$time_local] "$request" '
'$status
$body_bytes_sent "$http_referer" '
#连接超时时间(单位:秒,可在http、server、location中配置)
keepalive_timeout 120;
reset_timeout_connection on;
#单连接请求数上限 (限制用户通过某一连接项服务器发送请求的次数,可在http、server、location中配置)
keepalive_requests 100;
#是否允许sendfile方式传输文件(可在http、server、location中配置)
sendfile on;
sendfile_max_chunk 128k (#如果设置为0,则无限制)
#
tcp_nopush on;
#开启gzip压缩
gzip on;
gzip_disable "MSIE [1-6]\.(?!.*SV1)";
gzip _min_length
1000;
gzip_buffers
168k
#设置负载均衡服务器列表
upstream mysvr {
server 192.168.1:80 weight=5;
server 192.168.1:80 weight=2;
server 192.168.1:80 weight=8;
}
#shorten the timeout period, original one is 300
fastcgi_connect_timeout 30;
fastcgi_send_timeout 300;
fastcgi_read_timeout 300;
fastcgi_buffer_size 128k;
fastcgi_buffers 8 128k;
fastcgi_busy_buffers_size 256k;
fastcgi_temp_file_write_size 256k;
fastcgi_intercept_errors on;
fastcgi_hide_header Pragma;
# fastcgi cache
fastcgi_cache_path temp/fastcgi_cache levels=1:2 keys_zone=cache_voice:128m
inactive=30m max_size=4G;
五. server块详解
#监听端口
listen 80;
#服务域名
server_name www.xxx.com;
#虚拟主机的访问日志
access_log /var/log/nginx/www.xxx.com_access.log main;
#如果指定http错误状态码,则返回客户端指定的url地址
error_page 500 502 503 504 /50x.html;
location = 50x.html {
root /home/xiaoju/webroot;
}
六. location块详解
#定义网站根目录
root /home/xiaoju/webroot;
#定义首页索引文件的名称
index index.php index.html index.htm;
fastcgi_pass www.xx.com;
fastcgi_param SCRIPT_FILENAME $document_root/$fastcgi_script_name;
include /etc/nginx/fastcgi_params;
#引入配置文件(可以放在配置文件的任意位置)
include /etc/nginx/conf.d/*.conf;
include /etc/nginx/sites-enabled/*;
在此记录下Nginx服务器nginx.conf的配置文件说明, 部分注释收集与网络.
#运行用户
user www-data;
#启动进程,通常设置成和cpu的数量相等
worker_processes 1;
#全局错误日志及PID文件
error_log /var/log/nginx/error.log;
pid /var/run/nginx.pid;
#工作模式及连接数上限
events {
use epoll; #epoll是多路复用IO(I/O Multiplexing)中的一种方式,但是仅用于linux2.6以上内核,可以大大提高nginx的性能
worker_connections 1024;#单个后台worker process进程的最大并发链接数
# multi_accept on;
}
#设定http服务器,利用它的反向代理功能提供负载均衡支持
http {
#设定mime类型,类型由mime.type文件定义
include /etc/nginx/mime.types;
default_type application/octet-stream;
#设定日志格式
access_log /var/log/nginx/access.log;
#sendfile 指令指定 nginx 是否调用 sendfile 函数(zero copy 方式)来输出文件,对于普通应用,
#必须设为 on,如果用来进行下载等应用磁盘IO重负载应用,可设置为 off,以平衡磁盘与网络I/O处理速度,降低系统的uptime.
sendfile on;
#tcp_nopush on;
#连接超时时间
#keepalive_timeout 0;
keepalive_timeout 65;
tcp_nodelay on;
#开启gzip压缩
gzip on;
gzip_disable "MSIE [1-6]\.(?!.*SV1)";
#设定请求缓冲
client_header_buffer_size 1k;
large_client_header_buffers 4 4k;
include /etc/nginx/conf.d/*.conf;
include /etc/nginx/sites-enabled/*;
#设定负载均衡的服务器列表
upstream mysvr {
#weigth参数表示权值,权值越高被分配到的几率越大
#本机上的Squid开启3128端口
server 192.168.8.1:3128 weight=5;
server 192.168.8.2:80 weight=1;
server 192.168.8.3:80 weight=6;
}
server {
#侦听80端口
listen 80;
#定义使用www.xx.com访问
server_name www.xx.com;
#设定本虚拟主机的访问日志
access_log logs/www.xx.com.access.log main;
#默认请求
location / {
root /root; #定义服务器的默认网站根目录位置
index index.php index.html index.htm; #定义首页索引文件的名称
fastcgi_pass www.xx.com;
fastcgi_param SCRIPT_FILENAME $document_root/$fastcgi_script_name;
include /etc/nginx/fastcgi_params;
}
# 定义错误提示页面
error_page 500 502 503 504 /50x.html;
location = /50x.html {
root /root;
}
#静态文件,nginx自己处理
location ~ ^/(images|javascript|js|css|flash|media|static)/ {
root /var/www/virtual/htdocs;
#过期30天,静态文件不怎么更新,过期可以设大一点,如果频繁更新,则可以设置得小一点。
expires 30d;
}
#PHP 脚本请求全部转发到 FastCGI处理. 使用FastCGI默认配置.
location ~ \.php$ {
root /root;
fastcgi_pass 127.0.0.1:9000;
fastcgi_index index.php;
fastcgi_param SCRIPT_FILENAME /home/www/www$fastcgi_script_name;
include fastcgi_params;
}
#设定查看Nginx状态的地址
location /NginxStatus {
stub_status on;
access_log on;
auth_basic "NginxStatus";
auth_basic_user_file conf/htpasswd;
}
#禁止访问 .htxxx 文件
location ~ /\.ht {
deny all;
}
}
}
以上是一些基本的配置,使用Nginx最大的好处就是负载均衡
如果要使用负载均衡的话,可以修改配置http节点如下:
#设定http服务器,利用它的反向代理功能提供负载均衡支持
http {
#设定mime类型,类型由mime.type文件定义
include /etc/nginx/mime.types;
default_type application/octet-stream;
#设定日志格式
access_log /var/log/nginx/access.log;
#省略上文有的一些配置节点
#。。。。。。。。。。
#设定负载均衡的服务器列表
upstream mysvr {
#weigth参数表示权值,权值越高被分配到的几率越大
server 192.168.8.1x:3128 weight=5;#本机上的Squid开启3128端口
server 192.168.8.2x:80 weight=1;
server 192.168.8.3x:80 weight=6;
}
upstream mysvr2 {
#weigth参数表示权值,权值越高被分配到的几率越大
server 192.168.8.x:80 weight=1;
server 192.168.8.x:80 weight=6;
}
#第一个虚拟服务器
server {
#侦听192.168.8.x的80端口
listen 80;
server_name 192.168.8.x;
#对aspx后缀的进行负载均衡请求
location ~ .*\.aspx$ {
root /root; #定义服务器的默认网站根目录位置
index index.php index.html index.htm; #定义首页索引文件的名称
proxy_pass http://mysvr ;#请求转向mysvr 定义的服务器列表
#以下是一些反向代理的配置可删除.
proxy_redirect off;
#后端的Web服务器可以通过X-Forwarded-For获取用户真实IP
proxy_set_header Host $host;
proxy_set_header X-Real-IP $remote_addr;
proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
client_max_body_size 10m; #允许客户端请求的最大单文件字节数
client_body_buffer_size 128k; #缓冲区代理缓冲用户端请求的最大字节数,
proxy_connect_timeout 90; #nginx跟后端服务器连接超时时间(代理连接超时)
proxy_send_timeout 90; #后端服务器数据回传时间(代理发送超时)
proxy_read_timeout 90; #连接成功后,后端服务器响应时间(代理接收超时)
proxy_buffer_size 4k; #设置代理服务器(nginx)保存用户头信息的缓冲区大小
proxy_buffers 4 32k; #proxy_buffers缓冲区,网页平均在32k以下的话,这样设置
proxy_busy_buffers_size 64k; #高负荷下缓冲大小(proxy_buffers*2)
proxy_temp_file_write_size 64k; #设定缓存文件夹大小,大于这个值,将从upstream服务器传
}
}
}
二. 全局块详解
#定义nginx运行的用户和用户组
user www www;
#定义nginx进程数(建议设置为CPU数)
worker_processes 8;
#全局错误日志定义类型(错误日志类型:[debug|info|notice|warn|error|crit],从左到右错误信息越来越少;此指令可以在全局、http、server、location块中配置)
error_log /var/log/nginx/error.log info;
#定义进程文件
pid /var/run/nginx.pid;
三. events块详解
#定义工作模式
use epoll
#连接数上限(单个进程的最大连接数,web服务器的最大访问用户数 max clients = worker_processes *
worker_connections)
worker_connections 1024
#网络连接序列化(为了避免唤醒太多的进程数,会影响系统性能)
accept_mutex on
#工作进程是否允许同时接收多个网络连接
multi_accept on
四. http块详解
#设定mime类型(MIME-Type类型由mime.type文件定义)
include /etc/nginx/mime.types;
default_type application/octet-stream;
#默认编码
charset utf-8;
#定义服务器日志(此处的日志与常规的不同,它记录的是nginx服务器提供服务过程中应答前端请求的日志)
access_log /var/log/nginx/access.log combined;
log_format combined '$remote_addr
- $remote_user [$time_local] "$request" '
'$status
$body_bytes_sent "$http_referer" '
#连接超时时间(单位:秒,可在http、server、location中配置)
keepalive_timeout 120;
reset_timeout_connection on;
#单连接请求数上限 (限制用户通过某一连接项服务器发送请求的次数,可在http、server、location中配置)
keepalive_requests 100;
#是否允许sendfile方式传输文件(可在http、server、location中配置)
sendfile on;
sendfile_max_chunk 128k (#如果设置为0,则无限制)
#
tcp_nopush on;
#开启gzip压缩
gzip on;
gzip_disable "MSIE [1-6]\.(?!.*SV1)";
gzip _min_length
1000;
gzip_buffers
168k
#设置负载均衡服务器列表
upstream mysvr {
server 192.168.1:80 weight=5;
server 192.168.1:80 weight=2;
server 192.168.1:80 weight=8;
}
#shorten the timeout period, original one is 300
fastcgi_connect_timeout 30;
fastcgi_send_timeout 300;
fastcgi_read_timeout 300;
fastcgi_buffer_size 128k;
fastcgi_buffers 8 128k;
fastcgi_busy_buffers_size 256k;
fastcgi_temp_file_write_size 256k;
fastcgi_intercept_errors on;
fastcgi_hide_header Pragma;
# fastcgi cache
fastcgi_cache_path temp/fastcgi_cache levels=1:2 keys_zone=cache_voice:128m
inactive=30m max_size=4G;
五. server块详解
#监听端口
listen 80;
#服务域名
server_name www.xxx.com;
#虚拟主机的访问日志
access_log /var/log/nginx/www.xxx.com_access.log main;
#如果指定http错误状态码,则返回客户端指定的url地址
error_page 500 502 503 504 /50x.html;
location = 50x.html {
root /home/xiaoju/webroot;
}
六. location块详解
#定义网站根目录
root /home/xiaoju/webroot;
#定义首页索引文件的名称
index index.php index.html index.htm;
fastcgi_pass www.xx.com;
fastcgi_param SCRIPT_FILENAME $document_root/$fastcgi_script_name;
include /etc/nginx/fastcgi_params;
#引入配置文件(可以放在配置文件的任意位置)
include /etc/nginx/conf.d/*.conf;
include /etc/nginx/sites-enabled/*;
Nginx配置文件详细说明
在此记录下Nginx服务器nginx.conf的配置文件说明, 部分注释收集与网络.#运行用户
user www-data;
#启动进程,通常设置成和cpu的数量相等
worker_processes 1;
#全局错误日志及PID文件
error_log /var/log/nginx/error.log;
pid /var/run/nginx.pid;
#工作模式及连接数上限
events {
use epoll; #epoll是多路复用IO(I/O Multiplexing)中的一种方式,但是仅用于linux2.6以上内核,可以大大提高nginx的性能
worker_connections 1024;#单个后台worker process进程的最大并发链接数
# multi_accept on;
}
#设定http服务器,利用它的反向代理功能提供负载均衡支持
http {
#设定mime类型,类型由mime.type文件定义
include /etc/nginx/mime.types;
default_type application/octet-stream;
#设定日志格式
access_log /var/log/nginx/access.log;
#sendfile 指令指定 nginx 是否调用 sendfile 函数(zero copy 方式)来输出文件,对于普通应用,
#必须设为 on,如果用来进行下载等应用磁盘IO重负载应用,可设置为 off,以平衡磁盘与网络I/O处理速度,降低系统的uptime.
sendfile on;
#tcp_nopush on;
#连接超时时间
#keepalive_timeout 0;
keepalive_timeout 65;
tcp_nodelay on;
#开启gzip压缩
gzip on;
gzip_disable "MSIE [1-6]\.(?!.*SV1)";
#设定请求缓冲
client_header_buffer_size 1k;
large_client_header_buffers 4 4k;
include /etc/nginx/conf.d/*.conf;
include /etc/nginx/sites-enabled/*;
#设定负载均衡的服务器列表
upstream mysvr {
#weigth参数表示权值,权值越高被分配到的几率越大
#本机上的Squid开启3128端口
server 192.168.8.1:3128 weight=5;
server 192.168.8.2:80 weight=1;
server 192.168.8.3:80 weight=6;
}
server {
#侦听80端口
listen 80;
#定义使用www.xx.com访问
server_name www.xx.com;
#设定本虚拟主机的访问日志
access_log logs/www.xx.com.access.log main;
#默认请求
location / {
root /root; #定义服务器的默认网站根目录位置
index index.php index.html index.htm; #定义首页索引文件的名称
fastcgi_pass www.xx.com;
fastcgi_param SCRIPT_FILENAME $document_root/$fastcgi_script_name;
include /etc/nginx/fastcgi_params;
}
# 定义错误提示页面
error_page 500 502 503 504 /50x.html;
location = /50x.html {
root /root;
}
#静态文件,nginx自己处理
location ~ ^/(images|javascript|js|css|flash|media|static)/ {
root /var/www/virtual/htdocs;
#过期30天,静态文件不怎么更新,过期可以设大一点,如果频繁更新,则可以设置得小一点。
expires 30d;
}
#PHP 脚本请求全部转发到 FastCGI处理. 使用FastCGI默认配置.
location ~ \.php$ {
root /root;
fastcgi_pass 127.0.0.1:9000;
fastcgi_index index.php;
fastcgi_param SCRIPT_FILENAME /home/www/www$fastcgi_script_name;
include fastcgi_params;
}
#设定查看Nginx状态的地址
location /NginxStatus {
stub_status on;
access_log on;
auth_basic "NginxStatus";
auth_basic_user_file conf/htpasswd;
}
#禁止访问 .htxxx 文件
location ~ /\.ht {
deny all;
}
}
}
以上是一些基本的配置,使用Nginx最大的好处就是负载均衡
如果要使用负载均衡的话,可以修改配置http节点如下:
#设定http服务器,利用它的反向代理功能提供负载均衡支持
http {
#设定mime类型,类型由mime.type文件定义
include /etc/nginx/mime.types;
default_type application/octet-stream;
#设定日志格式
access_log /var/log/nginx/access.log;
#省略上文有的一些配置节点
#。。。。。。。。。。
#设定负载均衡的服务器列表
upstream mysvr {
#weigth参数表示权值,权值越高被分配到的几率越大
server 192.168.8.1x:3128 weight=5;#本机上的Squid开启3128端口
server 192.168.8.2x:80 weight=1;
server 192.168.8.3x:80 weight=6;
}
upstream mysvr2 {
#weigth参数表示权值,权值越高被分配到的几率越大
server 192.168.8.x:80 weight=1;
server 192.168.8.x:80 weight=6;
}
#第一个虚拟服务器
server {
#侦听192.168.8.x的80端口
listen 80;
server_name 192.168.8.x;
#对aspx后缀的进行负载均衡请求
location ~ .*\.aspx$ {
root /root; #定义服务器的默认网站根目录位置
index index.php index.html index.htm; #定义首页索引文件的名称
proxy_pass http://mysvr ;#请求转向mysvr 定义的服务器列表
#以下是一些反向代理的配置可删除.
proxy_redirect off;
#后端的Web服务器可以通过X-Forwarded-For获取用户真实IP
proxy_set_header Host $host;
proxy_set_header X-Real-IP $remote_addr;
proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
client_max_body_size 10m; #允许客户端请求的最大单文件字节数
client_body_buffer_size 128k; #缓冲区代理缓冲用户端请求的最大字节数,
proxy_connect_timeout 90; #nginx跟后端服务器连接超时时间(代理连接超时)
proxy_send_timeout 90; #后端服务器数据回传时间(代理发送超时)
proxy_read_timeout 90; #连接成功后,后端服务器响应时间(代理接收超时)
proxy_buffer_size 4k; #设置代理服务器(nginx)保存用户头信息的缓冲区大小
proxy_buffers 4 32k; #proxy_buffers缓冲区,网页平均在32k以下的话,这样设置
proxy_busy_buffers_size 64k; #高负荷下缓冲大小(proxy_buffers*2)
proxy_temp_file_write_size 64k; #设定缓存文件夹大小,大于这个值,将从upstream服务器传
}
}
}
相关文章推荐
- Nginx配置文件解析之一
- nginx配置文件解析
- nginx源码分析--配置文件解析
- nginx配置文件解析
- nginx配置文件大解析(优化)
- Nginx配置文件解析之二
- nginx 配置文件解析
- Nginx之——配置文件解析
- Nginx情景分析之配置文件解析
- Nginx.conf配置文件解析
- Nginx配置文件解析之三
- Nginx http_core模块 配置文件解析
- Nginx 源码分析-- 模块module 解析执行 nginx.conf 配置文件流程分析 二
- NGINX的配置文件解析
- nginx配置文件解析过程之神图
- nginx 配置文件解析--二
- 关于Nginx的配置文件解析
- Nginx的配置文件解析
- nginx配置文件大解析
- nginx配置文件大解析(优化)