EasyDarwin开源流媒体云平台之语音对讲功能设计与实现
2016-07-23 22:21
507 查看
EasyDarwin云平台一直在稳步的升级迭代中，近日，EasyDarwin云平台实现了语音对讲的功能。对讲功能的加入，标志着EasyDarwin云平台进一步的完善。
流程设计
客户端使用POST的方式在body中携带协议报文向云平台发送开始对讲命令；
云平台组织协议报文向指定的设备发送；
设备执行开始对讲命令后向云平台返回相应报文；
云平台将响应报文返回给客户端；
客户端请求开始对讲成功后，开始向云平台发送采集的音频数据；
云平台将音频数据转发给设备；
设备将音频数据播放出来；
客户端需要停止对讲时，向云平台发送停止对讲命令；
云平台转发给设备；
设备执行停止对讲后返回执行结果给云平台；
云平台将结果返回给客户端。
协议设计
格式说明：
Serial：设备序列号；
Channel：摄像机通道号；
Protocol：指定预置位控制方式，ONVIF协议或者设备SDK；
Command：对讲控制命令，包括启动对讲、停止对讲、发送对讲数据(START/STOP/SENDDATA)；
AudioType：音频数据类型，包括G711A/G726；
AudioData：音频数据，将音频数据通过Base64编码发送；
Pts：音频时间戳，开始为0，每20ms增加20；
Reserve:预留。
格式说明：
From: EasyCMS接收Client访问的SessionID；
To: EasyCMS向Device发送报文的SessionID；
Via: EasyCMS的ServiceID；
实现
WEB：www.EasyDarwin.org
QQ交流群：288214068
Copyright © EasyDarwin.org 2012-2016
流程设计
客户端使用POST的方式在body中携带协议报文向云平台发送开始对讲命令；
云平台组织协议报文向指定的设备发送；
设备执行开始对讲命令后向云平台返回相应报文；
云平台将响应报文返回给客户端；
客户端请求开始对讲成功后，开始向云平台发送采集的音频数据；
云平台将音频数据转发给设备；
设备将音频数据播放出来；
客户端需要停止对讲时，向云平台发送停止对讲命令；
云平台转发给设备；
设备执行停止对讲后返回执行结果给云平台；
云平台将结果返回给客户端。
协议设计
//客户端向云平台发送对讲报文
{
"EasyDarwin": {
"Body": {
"Channel": "0",
"Command": "START",
"AudioType": "G711A",
"Protocol": "ONVIF",
"Reserve": "1",
"Serial": "001001000058",
"Preset": "3",
"AudioData": "BASE64DATA",
"Pts": "20"
},
"Header": {
"CSeq": "1",
"MessageType": "MSG_CS_TALKBACK_CONTROL_REQ",
"Version": "1.0"
}
}
}格式说明：
Serial：设备序列号；
Channel：摄像机通道号；
Protocol：指定预置位控制方式，ONVIF协议或者设备SDK；
Command：对讲控制命令，包括启动对讲、停止对讲、发送对讲数据(START/STOP/SENDDATA)；
AudioType：音频数据类型，包括G711A/G726；
AudioData：音频数据，将音频数据通过Base64编码发送；
Pts：音频时间戳，开始为0，每20ms增加20；
Reserve:预留。
//云平台响应客户端请求
{
"EasyDarwin": {
"Body": {
"Channel": "0",
"Protocol": "ONVIF",
"Reserve": "1",
"Serial": "001001000058"
},
"Header": {
"CSeq": "1",
"ErrorNum": "200",
"ErrorString": "Success OK",
"MessageType": "MSG_SC_TALKBACK_CONTROL_ACK",
"Version": "1.0"
}
}
}//云平台向设备发送对讲命令
{
"EasyDarwin": {
"Body": {
"Channel": "0",
"Command": "SENDDATA",
"AudioType": "G711A",
"AudioData": "BASE64DATA",
"Pts": "20",
"From": "f6a221eec46b47dea8ae1a2bd11f8d02",
"Protocol": "ONVIF",
"Reserve": "1",
"Serial": "001001000058",
"To": "245d6ec33cd247b7b7524219552db4d8",
"Via": "27823d2e8b6b4032b453d435a16b7be8"
},
"Header": {
"CSeq": "1",
"MessageType": "MSG_SD_CONTROL_TALKBACK_REQ",
"Version": "1.0"
}
}
}格式说明：
From: EasyCMS接收Client访问的SessionID；
To: EasyCMS向Device发送报文的SessionID；
Via: EasyCMS的ServiceID；
//设备向云平台响应对讲命令
{
"EasyDarwin": {
"Body": {
"Channel": "0",
"From": "245d6ec33cd247b7b7524219552db4d8",
"Protocol": "ONVIF",
"Reserve": "1",
"Serial": "001001000058",
"To": "f6a221eec46b47dea8ae1a2bd11f8d02",
"Via": "27823d2e8b6b4032b453d435a16b7be8"
},
"Header": {
"CSeq": "1",
"ErrorNum": "200",
"ErrorString": "Success OK",
"MessageType": "MSG_DS_CONTROL_TALKBACK_ACK",
"Version": "1.0"
}
}
}实现
//EasyCMS HTTPSession.cpp execNetMsgCSTalkbackControlReq
QTSS_Error HTTPSession::execNetMsgCSTalkbackControlReq(const char* json)
{
if (!fAuthenticated)//没有进行认证请求
return httpUnAuthorized;
EasyProtocol req(json);
string strDeviceSerial = req.GetBodyValue(EASY_TAG_SERIAL);
string strChannel = req.GetBodyValue(EASY_TAG_CHANNEL);
string strProtocol = req.GetBodyValue(EASY_TAG_PROTOCOL);
string strReserve = req.GetBodyValue(EASY_TAG_RESERVE);
string strCmd = req.GetBodyValue(EASY_TAG_CMD);
string strAudioType = req.GetBodyValue(EASY_TAG_AUDIO_TYPE);
string strAudioData = req.GetBodyValue(EASY_TAG_AUDIO_DATA);
string strPts = req.GetBodyValue(EASY_TAG_PTS);
string strCSeq = req.GetHeaderValue(EASY_TAG_CSEQ);//这个是关键字
if (strChannel.empty())
strChannel = "0";
if (strReserve.empty())
strReserve = "1";
OSRefTableEx* deviceMap = QTSServerInterface::GetServer()->GetDeviceSessionMap();
OSRefTableEx::OSRefEx* theDevRef = deviceMap->Resolve(strDeviceSerial);
if (theDevRef == NULL)//找不到指定设备
return EASY_ERROR_DEVICE_NOT_FOUND;
OSRefReleaserEx releaser(deviceMap, strDeviceSerial);
//走到这说明存在指定设备
HTTPSession* pDevSession = static_cast<HTTPSession *>(theDevRef->GetObjectPtr());//获得当前设备回话
string errNo, errString;
if (strCmd == "SENDDATA")
{
if (!pDevSession->GetTalkbackSession().empty() && pDevSession->GetTalkbackSession() == fSessionID)
{
EasyProtocolACK reqreq(MSG_SD_CONTROL_TALKBACK_REQ);
EasyJsonValue headerheader, bodybody;
char chTemp[16] = { 0 };
UInt32 uDevCseq = pDevSession->GetCSeq();
sprintf(chTemp, "%d", uDevCseq);
headerheader[EASY_TAG_CSEQ] = string(chTemp);//注意这个地方不能直接将UINT32->int,因为会造成数据失真
headerheader[EASY_TAG_VERSION] = EASY_PROTOCOL_VERSION;
bodybody[EASY_TAG_SERIAL] = strDeviceSerial;
bodybody[EASY_TAG_CHANNEL] = strChannel;
bodybody[EASY_TAG_PROTOCOL] = strProtocol;
bodybody[EASY_TAG_RESERVE] = strReserve;
bodybody[EASY_TAG_CMD] = strCmd;
bodybody[EASY_TAG_AUDIO_TYPE] = strAudioType;
bodybody[EASY_TAG_AUDIO_DATA] = strAudioData;
bodybody[EASY_TAG_PTS] = strPts;
bodybody[EASY_TAG_FROM] = fSessionID;
bodybody[EASY_TAG_TO] = pDevSession->GetValue(EasyHTTPSessionID)->GetAsCString();
bodybody[EASY_TAG_VIA] = QTSServerInterface::GetServer()->GetCloudServiceNodeID();
reqreq.SetHead(headerheader);
reqreq.SetBody(bodybody);
string buffer = reqreq.GetMsg();
StrPtrLen theValue(const_cast<char*>(buffer.c_str()), buffer.size());
pDevSession->SendHTTPPacket(&theValue, false, false);
errNo = EASY_ERROR_SUCCESS_OK;
errString = EasyProtocol::GetErrorString(EASY_ERROR_SUCCESS_OK);
}
else
{
errNo = EASY_ERROR_CLIENT_BAD_REQUEST;
errString = EasyProtocol::GetErrorString(EASY_ERROR_CLIENT_BAD_REQUEST);
goto ACK;
}
}
else
{
if (strCmd == "START")
{
if (pDevSession->GetTalkbackSession().empty())
{
pDevSession->SetTalkbackSession(fSessionID);
errNo = EASY_ERROR_SUCCESS_OK;
errString = EasyProtocol::GetErrorString(EASY_ERROR_SUCCESS_OK);
}
else
{
errNo = EASY_ERROR_CLIENT_BAD_REQUEST;
errString = EasyProtocol::GetErrorString(EASY_ERROR_CLIENT_BAD_REQUEST);
goto ACK;
}
}
else if (strCmd == "STOP")
{
if (pDevSession->GetTalkbackSession().empty() || pDevSession->GetTalkbackSession() != fSessionID)
{
errNo = EASY_ERROR_CLIENT_BAD_REQUEST;
errString = EasyProtocol::GetErrorString(EASY_ERROR_CLIENT_BAD_REQUEST);
goto ACK;
}
else
{
pDevSession->SetTalkbackSession("");
errNo = EASY_ERROR_SUCCESS_OK;
errString = EasyProtocol::GetErrorString(EASY_ERROR_SUCCESS_OK);
}
}
EasyProtocolACK reqreq(MSG_SD_CONTROL_TALKBACK_REQ);
EasyJsonValue headerheader, bodybody;
char chTemp[16] = { 0 };
UInt32 uDevCseq = pDevSession->GetCSeq();
sprintf(chTemp, "%d", uDevCseq);
headerheader[EASY_TAG_CSEQ] = string(chTemp);//注意这个地方不能直接将UINT32->int,因为会造成数据失真
headerheader[EASY_TAG_VERSION] = EASY_PROTOCOL_VERSION;
bodybody[EASY_TAG_SERIAL] = strDeviceSerial;
bodybody[EASY_TAG_CHANNEL] = strChannel;
bodybody[EASY_TAG_PROTOCOL] = strProtocol;
bodybody[EASY_TAG_RESERVE] = strReserve;
bodybody[EASY_TAG_CMD] = strCmd;
bodybody[EASY_TAG_AUDIO_TYPE] = strAudioType;
bodybody[EASY_TAG_AUDIO_DATA] = strAudioData;
bodybody[EASY_TAG_PTS] = strPts;
bodybody[EASY_TAG_FROM] = fSessionID;
bodybody[EASY_TAG_TO] = pDevSession->GetValue(EasyHTTPSessionID)->GetAsCString();
bodybody[EASY_TAG_VIA] = QTSServerInterface::GetServer()->GetCloudServiceNodeID();
reqreq.SetHead(headerheader);
reqreq.SetBody(bodybody);
string buffer = reqreq.GetMsg();
StrPtrLen theValue(const_cast<char*>(buffer.c_str()), buffer.size());
pDevSession->SendHTTPPacket(&theValue, false, false);
}
ACK:
char chTemp[16] = { 0 };
UInt32 uDevCseq = pDevSession->GetCSeq();
sprintf(chTemp, "%d", uDevCseq);
EasyProtocolACK rsp(MSG_SC_TALKBACK_CONTROL_ACK);
EasyJsonValue header, body;
body[EASY_TAG_SERIAL] = strDeviceSerial;
body[EASY_TAG_CHANNEL] = strChannel;
body[EASY_TAG_PROTOCOL] = strProtocol;
body[EASY_TAG_RESERVE] = strReserve;
header[EASY_TAG_VERSION] = EASY_PROTOCOL_VERSION;
header[EASY_TAG_CSEQ] = string(chTemp);;
header[EASY_TAG_ERROR_NUM] = errNo;
header[EASY_TAG_ERROR_STRING] = errString;
rsp.SetHead(header);
rsp.SetBody(body);
string msg = rsp.GetMsg();
StrPtrLen theValueAck(const_cast<char*>(msg.c_str()), msg.size());
this->SendHTTPPacket(&theValueAck, false, false);
return QTSS_NoErr;
}//EasyCamera EasyCameraSource.cpp ControlTalkback
QTSS_Error EasyCameraSource::ControlTalkback(Easy_CameraTalkback_Params* params)
{
QTSS_Error result = QTSS_RequestFailed;
if (cameraLogin())
{
HI_S32 error = HI_SUCCESS;
switch (params->inCommand)
{
case EASY_TALKBACK_CMD_TYPE_START:
{
int type = 1;
if (params->inType == EASY_TALKBACK_AUDIO_TYPE_G711A)
type = 1;
else if (params->inType == EASY_TALKBACK_AUDIO_TYPE_G726)
type = 4;
error = HI_NET_DEV_StartVoice(m_u32Handle, type);
}
break;
case EASY_TALKBACK_CMD_TYPE_SENDDATA:
{
if (params->inBuff == NULL || params->inBuffLen == 0)
{
result = QTSS_BadArgument;
break;
}
int len = params->inBuffLen;
int offset = 0;
int pts = params->inPts;
while (len >= BUFFLEN)
{
AddHead(fTalkbackBuff, (char*)params->inBuff + offset, BUFFLEN);
error = HI_NET_DEV_SendVoiceData(m_u32Handle, fTalkbackBuff, HSBUFFLEN, pts);
offset += BUFFLEN;
len -= BUFFLEN;
pts += PTSPER;
}
}
break;
case EASY_TALKBACK_CMD_TYPE_STOP:
error = HI_NET_DEV_StopVoice(m_u32Handle);
break;
default:
result = QTSS_RequestFailed;
break;
}
if (error == HI_SUCCESS)
{
result = QTSS_NoErr;
}
else
{
result = QTSS_RequestFailed;
}
}
return result;
}获取更多信息
邮件：support@easydarwin.orgWEB：www.EasyDarwin.org
QQ交流群：288214068
Copyright © EasyDarwin.org 2012-2016
内容来自用户分享和网络整理，不保证内容的准确性，如有侵权内容，可联系管理员处理 
相关文章推荐
- 这段时间云计算挺热门！
- 云计算-云山雾罩不计算
- 云计算安全概述
- Linux与云计算——第二阶段 第三章：SSH服务器架设（下）openssh 进阶
- Linux与云计算——第二阶段 第三章：SSH服务器架设（上）openssh 基础
- Linux与云计算——第二阶段 第一章：NTP服务器架设
- 云计算（世界的技术发展潮流和趋势）
- EasyDarwin开源流媒体云平台中boost Base64编解码后与源长度不匹配的bug
- EasyDarwin开源流媒体云平台中boost Base64编解码后与源长度不匹配的bug
- hadoop大数据与hadoop云计算
- 云计算的三种服务模式 (IaaS SaaS PaaS)
- EasyDarwin开源流媒体云平台中boost Base64编解码后与源长度不匹配的bug
- 盗版软件满天飞，禁不了但可止得住！
- 扬尘噪声智能监测云平台
- 扬尘防治实时在线监控云平台
- 第三讲：云计算的产生和特点
- 第一讲：云计算基础知识第一讲：云计算概念
- 云计算之--------高级虚拟化KVM
- 红帽&誉天OpenStack云计算技术沙龙（北京站）
- 云计算之--------基础概念篇