iOS多线程的初步研究(四)-- NSTimer
2016-05-05 20:19
465 查看
理解run loop后,才能彻底理解NSTimer的实现原理,也就是说NSTimer实际上依赖run loop实现的。
先看看NSTimer的两个常用方法:
+ (NSTimer *)timerWithTimeInterval:(NSTimeInterval)ti target:(id)aTarget selector:(SEL)aSelector userInfo:(id)userInfo repeats:(BOOL)yesOrNo; //生成timer但不执行
+ (NSTimer *)scheduledTimerWithTimeInterval:(NSTimeInterval)ti target:(id)aTarget selector:(SEL)aSelector userInfo:(id)userInfo repeats:(BOOL)yesOrNo; //生成timer并且纳入当前线程的run
loop来执行
NSRunLoop与timer有关方法为:
- (void)addTimer:(NSTimer *)timer forMode:(NSString *)mode; //在run loop上注册timer
主线程已经有run loop,所以NSTimer一般在主线程上运行都不必再调用addTimer:。但在非主线程上运行必须配置run loop,该线程的main方法示例代码如下:
- (void)main
{
NSTimer *myTimer = [NSTimer scheduledTimerWithTimeInterval:1.0 target:self selector:@selector(timer:) userInfo:nil repeats:YES];
NSRunLoop *runLoop = [NSRunLoop currentRunLoop];
[runLoop addTimer:myTimer forMode:NSDefaultRunLoopMode]; //实际上这步是不需要,[b]scheduledTimerWithTimeInterval已经纳入当前线程运行。如果使用[b]timerWithTimeInterval则需要[/b][/b]
while (condition)
[runLoop run];
}
实际上这个线程无法退出,因为有timer事件需要处理,[runLoop run]会一直无法返回。解决办法就是设置一个截止时间:
[runLoop runUntilDate:[NSDate dateWithTimeIntervalSinceNow:10.0]]; //每隔10秒检查下线程循环条件,当然时间值可以根据实际情况来定。
我们通常在主线程中使用NSTimer,有个实际遇到的问题需要注意。当滑动界面时,系统为了更好地处理UI事件和滚动显示,主线程runloop会暂时停止处理一些其它事件,这时主线程中运行的NSTimer就会被暂停。解决办法就是改变NSTimer运行的mode(mode可以看成事件类型),不使用缺省的NSDefaultRunLoopMode,而是改用NSRunLoopCommonModes,这样主线程就会继续处理NSTimer事件了。具体代码如下:
NSTimer *timer = [NSTimer timerWithTimeInterval:1.0 target:self selector:@selector(timer:) userInfo:nil repeats:YES];
[[NSRunLoop currentRunLoop] addTimer:timer forMode:NSRunLoopCommonModes];
大家可以参看博文http://bluevt.org/?p=209,加深理解NSTimer和NSRunLoop的关系。
以前博文中提到延迟调用的方法,其实就是在当前线程的run loop上注册timer来实现定时运行的。所以如果是在非主线程上使用,一定要有一个run loop。
- (void)performSelector:(SEL)aSelector withObject:(id)anArgument afterDelay:(NSTimeInterval)delay inModes:(NSArray *)modes;
- (void)performSelector:(SEL)aSelector withObject:(id)anArgument afterDelay:(NSTimeInterval)delay;
先看看NSTimer的两个常用方法:
+ (NSTimer *)timerWithTimeInterval:(NSTimeInterval)ti target:(id)aTarget selector:(SEL)aSelector userInfo:(id)userInfo repeats:(BOOL)yesOrNo; //生成timer但不执行
+ (NSTimer *)scheduledTimerWithTimeInterval:(NSTimeInterval)ti target:(id)aTarget selector:(SEL)aSelector userInfo:(id)userInfo repeats:(BOOL)yesOrNo; //生成timer并且纳入当前线程的run
loop来执行
NSRunLoop与timer有关方法为:
- (void)addTimer:(NSTimer *)timer forMode:(NSString *)mode; //在run loop上注册timer
主线程已经有run loop,所以NSTimer一般在主线程上运行都不必再调用addTimer:。但在非主线程上运行必须配置run loop,该线程的main方法示例代码如下:
- (void)main
{
NSTimer *myTimer = [NSTimer scheduledTimerWithTimeInterval:1.0 target:self selector:@selector(timer:) userInfo:nil repeats:YES];
NSRunLoop *runLoop = [NSRunLoop currentRunLoop];
[runLoop addTimer:myTimer forMode:NSDefaultRunLoopMode]; //实际上这步是不需要,[b]scheduledTimerWithTimeInterval已经纳入当前线程运行。如果使用[b]timerWithTimeInterval则需要[/b][/b]
while (condition)
[runLoop run];
}
实际上这个线程无法退出,因为有timer事件需要处理,[runLoop run]会一直无法返回。解决办法就是设置一个截止时间:
[runLoop runUntilDate:[NSDate dateWithTimeIntervalSinceNow:10.0]]; //每隔10秒检查下线程循环条件,当然时间值可以根据实际情况来定。
我们通常在主线程中使用NSTimer,有个实际遇到的问题需要注意。当滑动界面时,系统为了更好地处理UI事件和滚动显示,主线程runloop会暂时停止处理一些其它事件,这时主线程中运行的NSTimer就会被暂停。解决办法就是改变NSTimer运行的mode(mode可以看成事件类型),不使用缺省的NSDefaultRunLoopMode,而是改用NSRunLoopCommonModes,这样主线程就会继续处理NSTimer事件了。具体代码如下:
NSTimer *timer = [NSTimer timerWithTimeInterval:1.0 target:self selector:@selector(timer:) userInfo:nil repeats:YES];
[[NSRunLoop currentRunLoop] addTimer:timer forMode:NSRunLoopCommonModes];
大家可以参看博文http://bluevt.org/?p=209,加深理解NSTimer和NSRunLoop的关系。
以前博文中提到延迟调用的方法,其实就是在当前线程的run loop上注册timer来实现定时运行的。所以如果是在非主线程上使用,一定要有一个run loop。
- (void)performSelector:(SEL)aSelector withObject:(id)anArgument afterDelay:(NSTimeInterval)delay inModes:(NSArray *)modes;
- (void)performSelector:(SEL)aSelector withObject:(id)anArgument afterDelay:(NSTimeInterval)delay;
相关文章推荐
- iOS多线程的初步研究(三)-- NSRunLoop
- iOS应用国际化教程
- iOS多线程的初步研究(二)-- 锁
- iOS多线程的初步研究(一)
- iOS语言国际化
- iOS开发中如何管理多个版本的Cocoapods、gem
- iOS开发技巧系列---打造强大的BaseModel
- iOS ShareSDK QQ空间分享Error code=206
- iOS,一行代码进行RSA、DES 、AES、MD5加密、解密
- iOS 开发CocoaPods的使用
- iOS使用runtime设置字体格式
- iOS时间转换(聊天时间)
- iOS 图片上传旋转90°
- ios图片处理相关问题
- iOS利用Runtime自定义控制器POP手势动画
- iOS ftp上传文件
- iOS开发-由浅至深学习block
- 有关iOS学习方法拙见
- iOS run loop(NSRunLoop)和线程的一些需要注意的细节
- iOS 图片捏合放大缩小 点击放大缩小