iOS生成静态库方法-iOS集成静态库-iOS合并静态库
2016-03-29 16:33
651 查看
在iOS的开发过程中,我们常常用到第三方的库。尤其是QQ、百度地图、广告等。
那么,如何制作自己的库文件呢?
如果,将自己写的功能类编译成库文件,分发给其他人来使用呢?
静态库的优点
编译静态库的好处也还是有的!
1.让自己的源码不被直接暴漏。
2.需要使用时,仅仅拷贝相应的.h文件和.a文件就好,不用在将源码一一拷贝。方便。
3.显得也比源码拷贝高端、大气一些。
那么,废话就不多说了!准备动工!
一、建立相应的静态库项目
这样,默认获得了项目同名的一组.h和.m文件。
熟悉吧,就在相应的文件中,写入功能函数!在本例子中,简单的直接写入相应的2个方法。
MyStaticLibraryDemo.h
文件
#import
@interface MyStaticLibraryDemo : NSObject
/// 加法
- (int)addMethodByFirst:(int)theFirst andSecond:(int)theSecond;
/// 减法
- (int)SubMethodByFirst:(int)theFirst andSecond:(int)theSecond;
@end
MyStaticLibraryDemo.m
文件
#import "MyStaticLibraryDemo.h"
@implementation MyStaticLibraryDemo
/// 加法
- (int)addMethodByFirst:(int)theFirst andSecond:(int)theSecond{
return (theFirst+theSecond);
}
/// 减法
- (int)SubMethodByFirst:(int)theFirst andSecond:(int)theSecond{
return (theFirst-theSecond);
}
@end
要做的,就这么简单,然后,调试代码无误后,就可以进行编译了!
二、编译静态库文件:XXXX.a
方法一,直接编译(command+B)。
这时,会发现,libMyStaticLibraryDemo.a生成了!进入相应的编译目录,会看到:
ok,有两个目录下的文件是我们需要的。
Release-iphoneos:应用于真机的静态库文件。
Release-iphonesimulator:应用于模拟器调试的静态库文件。
我们需要使用终端命令来看一下生成的相应的.a文件的属性(测试环境为作者本机环境):
1.Release-iphoneos版本
bogon:~ zhangzhen$ cd /Users/zhangzhen/Library/Developer/Xcode/DerivedData/MyStaticLibraryDemo-ciwnhcsbqgclkododazbmbmtdlfp/Build/Products/Release-iphoneos
bogon:Release-iphoneos zhangzhen$ lipo -info libMyStaticLibraryDemo.a
Architectures in the fat file: libMyStaticLibraryDemo.a are: armv7 armv7s arm64
可见,编译的可执行的CPU环境为arm7、armv7s、arm64。
2.Release-iphonesimulator版本
bogon:~ zhangzhen$ cd /Users/zhangzhen/Library/Developer/Xcode/DerivedData/MyStaticLibraryDemo-ciwnhcsbqgclkododazbmbmtdlfp/Build/Products/Release-iphonesimulator
bogon:Release-iphonesimulator zhangzhen$ lipo -info libMyStaticLibraryDemo.a
Architectures in the fat file: libMyStaticLibraryDemo.a are: i386 x86_64
可见,编译的可执行版本为i386 x86_64
三、使用静态库
在你的要使用太静态库的项目中导入libMyStaticLibraryDemo.a文件和include文件夹中的相应的所有.h头文件。
例如,我要在MyLibraryTest项目中,使用我上述编译好的静态库文件。
导入完成后,项目如下:
注意:你在真机调试和模拟器调试的时候,要替换相应的.a文件版本。
在需要使用该静态库的地方,导入相应的.h文件。你就可以使用了!
MyStaticLibraryDemo *myLibrary=[[MyStaticLibraryDemo alloc] init];
int result= [myLibrary addMethodByFirst:5 andSecond:5];
NSLog(@"Result:%d",result);
result=[myLibrary SubMethodByFirst:10 andSecond:5];
NSLog(@"Result:%d",result);
当然,你也可以,针对相应的用途来编译相应的.a静态库。
1.选择Edit Scheme项:
2.使用Build Configuration 来编译相应的用途版本:
这样,你就可以得到相应用途的静态库编译版本。
如果,你在使用中,很不幸的遇到了以下问题:
ld: warning: ignoring file /Users/XXXX/Documents/MyLibraryTest/MyLibraryTest/MyLibrary/libMyStaticLibraryDemo.a, missing required architecture i386 in file/Users/XXXX/Documents/MyLibraryTest/MyLibraryTest/MyLibrary/libMyStaticLibraryDemo.a
(3 slices)
Undefined symbols for architecture i386:
"_OBJC_CLASS_$_MyStaticLibraryDemo", referenced from:
objc-class-ref in AppDelegate.o
ld: symbol(s) not found for architecture i386
clang: error: linker command failed with exit code 1 (use -v to see invocation)
如图:
那么,我也很不幸的告诉你,你导入错误的编译版本。
以上错误,是你的库文件(.a)为真机版本,你却用模拟器来调试程序。将调试目标换成真机,即可!
四、合并静态库(真机+模拟器)
如果,你的调试需要不断在真机和模拟器之间切换。那么,制作一个通用的静态库.a文件是一个好想法。
这样,使用该静态库文件就可以在真机和模拟器上调试。
制作过程也是非常简单。动手吧:
1.使用终端合并2个版本。
bogon:~ zhangzhen$ lipo -create /所在路径/Release-iphoneos/libMyStaticLibraryDemo.a /所在路径/Release-iphonesimulator/libMyStaticLibraryDemo.a -output /Users/zhangzhen/Desktop/libUniversal.a
bogon:~ zhangzhen$
这样,就可以合并一个通用版本的静态库。唯一不爽的,就是体积要大一些。
通用版本大小>=模拟器版本大小+真机版本大小。
那么,如何制作自己的库文件呢?
如果,将自己写的功能类编译成库文件,分发给其他人来使用呢?
静态库的优点
编译静态库的好处也还是有的!
1.让自己的源码不被直接暴漏。
2.需要使用时,仅仅拷贝相应的.h文件和.a文件就好,不用在将源码一一拷贝。方便。
3.显得也比源码拷贝高端、大气一些。
那么,废话就不多说了!准备动工!
一、建立相应的静态库项目
这样,默认获得了项目同名的一组.h和.m文件。
熟悉吧,就在相应的文件中,写入功能函数!在本例子中,简单的直接写入相应的2个方法。
MyStaticLibraryDemo.h
文件
#import
@interface MyStaticLibraryDemo : NSObject
/// 加法
- (int)addMethodByFirst:(int)theFirst andSecond:(int)theSecond;
/// 减法
- (int)SubMethodByFirst:(int)theFirst andSecond:(int)theSecond;
@end
MyStaticLibraryDemo.m
文件
#import "MyStaticLibraryDemo.h"
@implementation MyStaticLibraryDemo
/// 加法
- (int)addMethodByFirst:(int)theFirst andSecond:(int)theSecond{
return (theFirst+theSecond);
}
/// 减法
- (int)SubMethodByFirst:(int)theFirst andSecond:(int)theSecond{
return (theFirst-theSecond);
}
@end
要做的,就这么简单,然后,调试代码无误后,就可以进行编译了!
二、编译静态库文件:XXXX.a
方法一,直接编译(command+B)。
这时,会发现,libMyStaticLibraryDemo.a生成了!进入相应的编译目录,会看到:
ok,有两个目录下的文件是我们需要的。
Release-iphoneos:应用于真机的静态库文件。
Release-iphonesimulator:应用于模拟器调试的静态库文件。
我们需要使用终端命令来看一下生成的相应的.a文件的属性(测试环境为作者本机环境):
1.Release-iphoneos版本
bogon:~ zhangzhen$ cd /Users/zhangzhen/Library/Developer/Xcode/DerivedData/MyStaticLibraryDemo-ciwnhcsbqgclkododazbmbmtdlfp/Build/Products/Release-iphoneos
bogon:Release-iphoneos zhangzhen$ lipo -info libMyStaticLibraryDemo.a
Architectures in the fat file: libMyStaticLibraryDemo.a are: armv7 armv7s arm64
可见,编译的可执行的CPU环境为arm7、armv7s、arm64。
2.Release-iphonesimulator版本
bogon:~ zhangzhen$ cd /Users/zhangzhen/Library/Developer/Xcode/DerivedData/MyStaticLibraryDemo-ciwnhcsbqgclkododazbmbmtdlfp/Build/Products/Release-iphonesimulator
bogon:Release-iphonesimulator zhangzhen$ lipo -info libMyStaticLibraryDemo.a
Architectures in the fat file: libMyStaticLibraryDemo.a are: i386 x86_64
可见,编译的可执行版本为i386 x86_64
三、使用静态库
在你的要使用太静态库的项目中导入libMyStaticLibraryDemo.a文件和include文件夹中的相应的所有.h头文件。
例如,我要在MyLibraryTest项目中,使用我上述编译好的静态库文件。
导入完成后,项目如下:
注意:你在真机调试和模拟器调试的时候,要替换相应的.a文件版本。
在需要使用该静态库的地方,导入相应的.h文件。你就可以使用了!
MyStaticLibraryDemo *myLibrary=[[MyStaticLibraryDemo alloc] init];
int result= [myLibrary addMethodByFirst:5 andSecond:5];
NSLog(@"Result:%d",result);
result=[myLibrary SubMethodByFirst:10 andSecond:5];
NSLog(@"Result:%d",result);
当然,你也可以,针对相应的用途来编译相应的.a静态库。
1.选择Edit Scheme项:
2.使用Build Configuration 来编译相应的用途版本:
这样,你就可以得到相应用途的静态库编译版本。
如果,你在使用中,很不幸的遇到了以下问题:
ld: warning: ignoring file /Users/XXXX/Documents/MyLibraryTest/MyLibraryTest/MyLibrary/libMyStaticLibraryDemo.a, missing required architecture i386 in file/Users/XXXX/Documents/MyLibraryTest/MyLibraryTest/MyLibrary/libMyStaticLibraryDemo.a
(3 slices)
Undefined symbols for architecture i386:
"_OBJC_CLASS_$_MyStaticLibraryDemo", referenced from:
objc-class-ref in AppDelegate.o
ld: symbol(s) not found for architecture i386
clang: error: linker command failed with exit code 1 (use -v to see invocation)
如图:
那么,我也很不幸的告诉你,你导入错误的编译版本。
以上错误,是你的库文件(.a)为真机版本,你却用模拟器来调试程序。将调试目标换成真机,即可!
四、合并静态库(真机+模拟器)
如果,你的调试需要不断在真机和模拟器之间切换。那么,制作一个通用的静态库.a文件是一个好想法。
这样,使用该静态库文件就可以在真机和模拟器上调试。
制作过程也是非常简单。动手吧:
1.使用终端合并2个版本。
bogon:~ zhangzhen$ lipo -create /所在路径/Release-iphoneos/libMyStaticLibraryDemo.a /所在路径/Release-iphonesimulator/libMyStaticLibraryDemo.a -output /Users/zhangzhen/Desktop/libUniversal.a
bogon:~ zhangzhen$
这样,就可以合并一个通用版本的静态库。唯一不爽的,就是体积要大一些。
通用版本大小>=模拟器版本大小+真机版本大小。
相关文章推荐
- [iOS]列表视频播放
- iOS 关于如何将cell.detailTextLabel.text的内容显示出来的问题。
- ios设计的神细节
- OC中NSLog函数输出格式
- iOS - 融云即时通讯的简单使用
- ios 关于如何消除在向cell中添加图片文字是时出现的重影问题
- IOS基础知识
- IOS基础知识
- iOS数据存储之CoreData封装MagicalRecord
- iOS 国际化
- iOS数据存储之CoreData(一)
- iOS自适应布局之Masonry(一)
- iOS post一个json字符串到服务器 评论
- iOS开发~FMDB的使用
- iOS学习笔记07--深拷贝与浅拷贝
- ios 关于如何调整cell.imageView中的ImageView大小及位置
- iOS 重写pop跳转的方法
- iOS应用程序生命周期(前后台切换,应用的各种状态)详解
- iOS-获取当前View所在的控制器
- iOS多线程编程技术之NSThread、Cocoa NSOperation、GCD