apache 配置 中英
2016-02-18 00:00
573 查看
摘要: apache 配置 中英
文章简介:Apache最新官方配置文件中文版。帮忙web服务器管理员更方便的对Apache进行配置。
#
# Based upon the NCSA server configuration files originally by Rob McCool.
#参照NCSA服务器的配置文件,原版由Rob McCool发布
#
# This is the main Apache server configuration file. It contains the
# configuration directives that give the server its instructions.
# See for detailed information about
# the directives.
#这是Apache server的主配置文件. 它包含配置指令,来指示服务器
#请参考 http://httpd.apache.org/docs-2.0 了解关于指令的详细信息
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
#不要仅仅是阅读本指令,而应该理解指令做了什么。在这里仅起提示的作用。
#如果你不清楚请参阅在线文档。特别提示
# The configuration directives are grouped into three basic sections:
#配置文件批令分为三个基本组
# 1. Directives that control the operation of the Apache server process as a
# whole (the 'global environment').
# 1. 控制Apache server的全局操作的指令(全局环境变量).
# 2. Directives that define the parameters of the 'main' or 'default' server,
# which responds to requests that aren't handled by a virtual host.
# These directives also provide default values for the settings
# of all virtual hosts.
# 2.配置主服务或者默认服务的指令,它针对那些被虚拟主机以外的请求作出响应.
# 它也包含虚拟主机的一些默认参数
# 3. Settings for virtual hosts, which allow Web requests to be sent to
# different IP addresses or hostnames and have them handled by the
# same Apache server process.
# 3. 虚拟主机设置,这使得发往不同的ip或者主机名的请求可以被子同一个Apache服务# 器处理
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "C:/Program Files/Apache Group/Apache2" will be interpreted by the
# server as "C:/Program Files/Apache Group/Apache2/logs/foo.log".
#配置和日志文件名:如果你所指定的文件名以”/”(在Win32中以盘符:/)开头,服务器将以绝对路径来处理。如果不以”/”开头,则以相对于ServerRoot不解释,所以对于logs/foo.log来讲,当ServerRoot为"C:/Program Files/Apache Group/Apache2”时,则指的是
C:/Program Files/Apache Group/Apache2/logs/foo.log文件
# NOTE: Where filenames are specified, you must use forward slashes
# instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
注意,在文件名的定义中,必须用正斜杠,而不是反斜杠,如c:/apache而不是c:\apache
# If a drive letter is omitted, the drive on which Apache.exe is located
详情http://www.newhua.com/2005/1101/4328.shtml
文章简介:Apache最新官方配置文件中文版。帮忙web服务器管理员更方便的对Apache进行配置。
#
# Based upon the NCSA server configuration files originally by Rob McCool.
#参照NCSA服务器的配置文件,原版由Rob McCool发布
#
# This is the main Apache server configuration file. It contains the
# configuration directives that give the server its instructions.
# See for detailed information about
# the directives.
#这是Apache server的主配置文件. 它包含配置指令,来指示服务器
#请参考 http://httpd.apache.org/docs-2.0 了解关于指令的详细信息
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
#不要仅仅是阅读本指令,而应该理解指令做了什么。在这里仅起提示的作用。
#如果你不清楚请参阅在线文档。特别提示
# The configuration directives are grouped into three basic sections:
#配置文件批令分为三个基本组
# 1. Directives that control the operation of the Apache server process as a
# whole (the 'global environment').
# 1. 控制Apache server的全局操作的指令(全局环境变量).
# 2. Directives that define the parameters of the 'main' or 'default' server,
# which responds to requests that aren't handled by a virtual host.
# These directives also provide default values for the settings
# of all virtual hosts.
# 2.配置主服务或者默认服务的指令,它针对那些被虚拟主机以外的请求作出响应.
# 它也包含虚拟主机的一些默认参数
# 3. Settings for virtual hosts, which allow Web requests to be sent to
# different IP addresses or hostnames and have them handled by the
# same Apache server process.
# 3. 虚拟主机设置,这使得发往不同的ip或者主机名的请求可以被子同一个Apache服务# 器处理
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "C:/Program Files/Apache Group/Apache2" will be interpreted by the
# server as "C:/Program Files/Apache Group/Apache2/logs/foo.log".
#配置和日志文件名:如果你所指定的文件名以”/”(在Win32中以盘符:/)开头,服务器将以绝对路径来处理。如果不以”/”开头,则以相对于ServerRoot不解释,所以对于logs/foo.log来讲,当ServerRoot为"C:/Program Files/Apache Group/Apache2”时,则指的是
C:/Program Files/Apache Group/Apache2/logs/foo.log文件
# NOTE: Where filenames are specified, you must use forward slashes
# instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
注意,在文件名的定义中,必须用正斜杠,而不是反斜杠,如c:/apache而不是c:\apache
# If a drive letter is omitted, the drive on which Apache.exe is located
详情http://www.newhua.com/2005/1101/4328.shtml
相关文章推荐
- Apache Isis 1.4.0 发布,领域驱动开发框架
- Linux快速构建apache web服务器
- Awstats处理多apache日志
- 安装perl模块小窍门
- [游戏资讯]《极品飞车16:亡命狂飙》配置需求公布
- 配置文件神器 typesafe conf 用法简介
- 配置文件神器 typesafe conf 用法简介
- 路由器备份配置
- 路由器的基本配置
- 路由器基础配置及传输协议
- 经典配置 Vlan篇
- 备份线路的配置
- 交换机如何配置 新手配置交换机详细教程
- 如何进行系统配置
- 路由器的配置与调试
- DOS下内存的配置
- PHP+Apache在Windows 9x下的安装和配置
- IIS配置文件隐患
- Apache服务器配置全攻略