Mongodb 删除添加分片与非分片表维护
2016-01-15 00:00
337 查看
MongoDB 是一个基于分布式文件存储的数据库。由 C++ 语言编写。旨在为 WEB 应用提供可扩展的高性能数据存储解决方案。
MongoDB 是一个介于关系数据库和非关系数据库之间的产品,是非关系数据库当中功能最丰富,最像关系数据库的。
一、如何移除分片
1、确认balancer已经开启
mongos> sh.getBalancerState()
true
2、移除分片
注:在admin db下执行命令。
3、检查迁移的状态
同样执行
remaining中的chunks表示还有多少数据块未迁移。
4、移除未分片数据
In a cluster, a database with unsharded collections stores those collections only on a single shard.
That shard becomes the primary shard for that database. (Different databases in a cluster can have different primary shards.)
WARNING
Do not perform this procedure until you have finished draining the shard.
1)To determine if the shard you are removing is the primary shard for any of the cluster's databases, issue one of the following methods:
sh.status()
db.printShardingStatus()
In the resulting document, the databases field lists each database and its primary shard.
For example, the following database field shows that the products database uses mongodb0 as the primary shard:
{ "_id" : "products", "partitioned" : true, "primary" : "mongodb0" }
2)To move a database to another shard, use the movePrimary command. For example, to migrate all remaining unsharded data from mongodb0 to mongodb1,
issue the following command:
use admin
db.runCommand( { movePrimary: "products", to: "mongodb1" }) --products为db name
This command does not return until MongoDB completes moving all data, which may take a long time.
The response from this command will resemble the following:
{ "primary" : "mongodb1", "ok" : 1 }
If you use the movePrimary command to move un-sharded collections, you must either restart all mongos instances,
or use the flushRouterConfig command on all mongos instances before writing any data to the cluster.
This action notifies the mongos of the new shard for the database.
If you do not update the mongos instances' metadata cache after using movePrimary, the mongos may not write data to the correct shard.
To recover, you must manually intervene.
根据上面所说,迁移非分片表 时 最好停机,在运行db.runCommand( { movePrimary: "products", to: "mongodb1" }) 命令完成之后,刷新所有mongos后(所有mongos上运行db.runCommand("flushRouterConfig")),再对外提供服务。当然也可以重新启动所有mongos实例 。
5、完成迁移
如果state为 completed,表示已完成迁移。
二、添加分片
1、首先确认balancer已经开启
mongos> sh.getBalancerState()
true
2、执行添加分片的命令
如果出现以下错误,删除目标shard3上的test1数据库,再次执行命令
最后运行sh.status()命令确认迁移是否成功,可能会花比较长的时间。
以上内容是给大家介绍了Mongodb 删除添加分片与非分片表维护的全部叙述,希望对大家有所帮助。
mongodb replica set 添加删除节点的2种方法
MongoDB 是一个介于关系数据库和非关系数据库之间的产品,是非关系数据库当中功能最丰富,最像关系数据库的。
一、如何移除分片
1、确认balancer已经开启
mongos> sh.getBalancerState()
true
2、移除分片
注:在admin db下执行命令。
mongos> use admin switched to db admin mongos> db.runCommand( { removeShard: "shard3" } ) { "msg" : "draining started successfully", "state" : "started", "shard" : "shard3", "ok" : 1 }
3、检查迁移的状态
同样执行
mongos> use admin switched to db admin mongos> db.runCommand( { removeShard: "shard3" } ) { "msg" : "draining ongoing", "state" : "ongoing", "remaining" : { "chunks" : NumberLong(3), "dbs" : NumberLong(0) }, "ok" : 1 }
remaining中的chunks表示还有多少数据块未迁移。
4、移除未分片数据
In a cluster, a database with unsharded collections stores those collections only on a single shard.
That shard becomes the primary shard for that database. (Different databases in a cluster can have different primary shards.)
WARNING
Do not perform this procedure until you have finished draining the shard.
1)To determine if the shard you are removing is the primary shard for any of the cluster's databases, issue one of the following methods:
sh.status()
db.printShardingStatus()
In the resulting document, the databases field lists each database and its primary shard.
For example, the following database field shows that the products database uses mongodb0 as the primary shard:
{ "_id" : "products", "partitioned" : true, "primary" : "mongodb0" }
2)To move a database to another shard, use the movePrimary command. For example, to migrate all remaining unsharded data from mongodb0 to mongodb1,
issue the following command:
use admin
db.runCommand( { movePrimary: "products", to: "mongodb1" }) --products为db name
This command does not return until MongoDB completes moving all data, which may take a long time.
The response from this command will resemble the following:
{ "primary" : "mongodb1", "ok" : 1 }
If you use the movePrimary command to move un-sharded collections, you must either restart all mongos instances,
or use the flushRouterConfig command on all mongos instances before writing any data to the cluster.
This action notifies the mongos of the new shard for the database.
If you do not update the mongos instances' metadata cache after using movePrimary, the mongos may not write data to the correct shard.
To recover, you must manually intervene.
根据上面所说,迁移非分片表 时 最好停机,在运行db.runCommand( { movePrimary: "products", to: "mongodb1" }) 命令完成之后,刷新所有mongos后(所有mongos上运行db.runCommand("flushRouterConfig")),再对外提供服务。当然也可以重新启动所有mongos实例 。
5、完成迁移
mongos> use admin switched to db admin mongos> db.runCommand( { removeShard: "shard3" } ) { "msg" : "removeshard completed successfully", "state" : "completed", "shard" : "shard3", "ok" : 1 }
如果state为 completed,表示已完成迁移。
二、添加分片
1、首先确认balancer已经开启
mongos> sh.getBalancerState()
true
2、执行添加分片的命令
如果出现以下错误,删除目标shard3上的test1数据库,再次执行命令
mongos> sh.addShard("shard3/192.168.137.138:27019") { "ok" : 0, "errmsg" : "can't add shard shard3/192.168.137.138:27019 because a local database 'test1' exists in another shard1:shard1/192.168.137.111:27017,192.168.137.75:27017" } mongos> sh.addShard("shard3/192.168.137.138:27019") { "shardAdded" : "shard3", "ok" : 1 }
最后运行sh.status()命令确认迁移是否成功,可能会花比较长的时间。
以上内容是给大家介绍了Mongodb 删除添加分片与非分片表维护的全部叙述,希望对大家有所帮助。
您可能感兴趣的文章:
PHP中MongoDB数据库的连接、添加、修改、查询、删除等操作实例mongodb replica set 添加删除节点的2种方法
相关文章推荐
- MongoDB索引使用详解
- Mongodb 添加删除分片与非分片表维护
- Install MongoDB Community Edition on Windows
- Install MongoDB Community Edition on Windows
- MongoDB入门
- MongoDB 字段增长
- 使用C#对MongoDB中的数据进行查询,改动等操作
- Mongodb内存管理和使用情况情况查询
- MongoDB Sharding学习理论篇
- MongoDB 问题123
- 从 MongoDB 及 Mysql 谈B/B+树
- 五个解决方案让MongoDB拥有RDBMS的鲁棒性事务
- Mongodb在window上启动
- mongodb 常用命令 日期, 分组
- MongoDB Write Concern整理
- DOTA2比赛赛前预测算法的研究(二)--关于数据存储,mongoDB的使用
- MongoDB Windows环境安装及配置
- mongodb常用工具类
- Mongodb 分片 手动维护chunk
- mongodb复制-副本集