iOS_程序执行顺序
2015-11-21 00:12
330 查看
关于这个话题其实可以变化的不多, 毕竟执行顺序是死的, 只是这个问题在面试中会被问到, 所以拿出来说一下
1.main.m 程序的入口
这里 main 函数为我们做了三件事情
a.创建了一个 UIApplication 对象;
b.指定了一个 UIApplication 的代理委托;
c.UIApplicationMain 会为我们开启个事件循环(控制我们手指触到屏幕或者其他的事件);
int main(int argc,
char * argv[]) {
@autoreleasepool {
return
UIApplicationMain(argc, argv, nil,
NSStringFromClass([AppDelegate
class]));
}
}
2.xxx - Prefix.pch预编译头文件
3.xxx - Info.plist程序配置文件
4.InfoPlist.string 国际化文件
5.MyProject.app 最终程序
6.framework 是程序用到的框架
UIApplicationDelegate
/*UIApplicationDelegate是个协议,定义了一堆监测程序执行的方法.这些方法都有自己的触发事件;
大致分为几类:程序启动、活跃/非活跃状态、前/后台切换、推送通知、内存警告等;*/
其中appDelegate中, 在程序还会涉及到下面这些方法,分别是在程序进行至各个状态时调用的
#pragma mark -应用程序将要取消活动状态;
- (void)applicationWillResignActive:(UIApplication *)application {
// Sent when the application is about to move from active to inactive state. This can occur for certain types of temporary interruptions (such as an incoming phone call or SMS message) or when the user quits the application
and it begins the transition to the background state.
// Use this method to pause ongoing tasks, disable timers, and throttle down OpenGL ES frame rates. Games should use this method to pause the game.
}
#pragma mark -应用程序将要进入后台;
- (void)applicationDidEnterBackground:(UIApplication *)application {
// Use this method to release shared resources, save user data, invalidate timers, and store enough application state information to restore your application to its current state in case it is terminated later.
// If your application supports background execution, this method is called instead of applicationWillTerminate: when the user quits.
}
#pragma mark -应用程序将要进入前台;
- (void)applicationWillEnterForeground:(UIApplication *)application {
// Called as part of the transition from the background to the inactive state; here you can undo many of the changes made on entering the background.
}
#pragma mark -应用程序变为活动状态;
- (void)applicationDidBecomeActive:(UIApplication *)application {
// Restart any tasks that were paused (or not yet started) while the application was inactive. If the application was previously in the background, optionally refresh the user interface.
}
#pragma mark -应用程序将要终止(通常用在后台下载至一半是退出程序时);
- (void)applicationWillTerminate:(UIApplication *)application {
// Called when the application is about to terminate. Save data if appropriate. See also applicationDidEnterBackground:.
}
1.main.m 程序的入口
这里 main 函数为我们做了三件事情
a.创建了一个 UIApplication 对象;
b.指定了一个 UIApplication 的代理委托;
c.UIApplicationMain 会为我们开启个事件循环(控制我们手指触到屏幕或者其他的事件);
int main(int argc,
char * argv[]) {
@autoreleasepool {
return
UIApplicationMain(argc, argv, nil,
NSStringFromClass([AppDelegate
class]));
}
}
2.xxx - Prefix.pch预编译头文件
3.xxx - Info.plist程序配置文件
4.InfoPlist.string 国际化文件
5.MyProject.app 最终程序
6.framework 是程序用到的框架
UIApplicationDelegate
/*UIApplicationDelegate是个协议,定义了一堆监测程序执行的方法.这些方法都有自己的触发事件;
大致分为几类:程序启动、活跃/非活跃状态、前/后台切换、推送通知、内存警告等;*/
其中appDelegate中, 在程序还会涉及到下面这些方法,分别是在程序进行至各个状态时调用的
#pragma mark -应用程序将要取消活动状态;
- (void)applicationWillResignActive:(UIApplication *)application {
// Sent when the application is about to move from active to inactive state. This can occur for certain types of temporary interruptions (such as an incoming phone call or SMS message) or when the user quits the application
and it begins the transition to the background state.
// Use this method to pause ongoing tasks, disable timers, and throttle down OpenGL ES frame rates. Games should use this method to pause the game.
}
#pragma mark -应用程序将要进入后台;
- (void)applicationDidEnterBackground:(UIApplication *)application {
// Use this method to release shared resources, save user data, invalidate timers, and store enough application state information to restore your application to its current state in case it is terminated later.
// If your application supports background execution, this method is called instead of applicationWillTerminate: when the user quits.
}
#pragma mark -应用程序将要进入前台;
- (void)applicationWillEnterForeground:(UIApplication *)application {
// Called as part of the transition from the background to the inactive state; here you can undo many of the changes made on entering the background.
}
#pragma mark -应用程序变为活动状态;
- (void)applicationDidBecomeActive:(UIApplication *)application {
// Restart any tasks that were paused (or not yet started) while the application was inactive. If the application was previously in the background, optionally refresh the user interface.
}
#pragma mark -应用程序将要终止(通常用在后台下载至一半是退出程序时);
- (void)applicationWillTerminate:(UIApplication *)application {
// Called when the application is about to terminate. Save data if appropriate. See also applicationDidEnterBackground:.
}
相关文章推荐
- ios tableview下拉头部图片变大
- 蜂窝教育iOS培训:让学员月薪万元入职
- iOS ViewController之间传值方法三(利用NSNotification)
- 清除IOS项目中无用的图片资源
- iOS企业ipa(299)证书制作、打包发布全流程
- iOS - runtime理解详细解释
- Nagios事件机制实践
- XML
- iOS二维码
- iOS技术沙龙之 - 核心动画(1)
- iOS笔记22
- 单例
- 宏定义
- 颜色设置的宏定义
- ios程序的 .pch 文件丢失后
- xcode7下IOS状态栏的颜色
- 蓝懿ios 技术内容交流和学习心得 11.20
- iOS开发笔记--使用Auto Layout中的VFL(Visual format language)--代码实现自动布局
- iOS开发系列--视图切换
- iOS9 3D touch 适配开发