Tomcat7 设置最大连接数
2015-10-31 16:42
471 查看
在tomcat配置文件server.xml中的<Connector ... />配置中,和连接数相关的参数有:
minProcessors:最小空闲连接线程数,用于提高系统处理性能,默认值为10
maxProcessors:最大连接线程数,即:并发处理的最大请求数,默认值为75
acceptCount:允许的最大连接数,应大于等于maxProcessors,默认值为100
enableLookups:是否反查域名,取值为:true或false。为了提高处理能力,应设置为false
connectionTimeout:网络连接超时,单位:毫秒。设置为0表示永不超时,这样设置有隐患的。通常可设置为30000毫秒。
其中和最大连接数相关的参数为maxProcessors和acceptCount。如果要加大并发连接数,应同时加大这两个参数。
首先,在这里:http://tomcat.apache.org/ 我们点击左侧导航栏中“Documentation”下的Tomcat 7.0,进入到这个链接中:http://tomcat.apache.org/tomcat-7.0-doc/index.html ,详细的信息我们不用都看,在左侧导航栏中有一个链接Configuration,我们点进去之后,再点击其左侧导航栏中connector一项的HTTP,就进入到HTTP连接数及其他相关属性的设置页面了。在这里(http://tomcat.apache.org/tomcat-7.0-doc/config/http.html)我们可以看到,在Connector的属性配置中,压根就没有maxProcessors等的设置选项。其中这句话已经介绍得很清楚:
If more simultaneous requests are received than can be handled by the currently available request processing threads, additional threads will be created up to the configured maximum (the value of the
If still more simultaneous requests are received, they are stacked up inside the server socket created by the Connector, up to the configured maximum (the value of the
所以我们需要设置的是maxThreads和acceptCount这两个值:
其中,maxThreads的介绍如下:
The maximum number of request processing threads to be created by this Connector, which therefore determines the maximum number of simultaneous requests that can be handled. If not specified, this attribute is set to 200.
If an executor is associated with this connector, this attribute is ignored as the connector will execute tasks using the executor rather than an internal thread pool.
而acceptCount的介绍为:
The maximum queue length for incoming connection requests when all possible request processing threads are in use. Any requests received when the queue is full will be refused. The default value is 100.
所以两者的默认值分别是200和100,要调整Tomcat的默认最大连接数,可以增加这两个属性的值,并且使acceptCount大于等于maxThreads:
<Connector port="8080" protocol="HTTP/1.1"
connectionTimeout="20000"
redirectPort="8443" acceptCount="500" maxThreads="400" />
minProcessors:最小空闲连接线程数,用于提高系统处理性能,默认值为10
maxProcessors:最大连接线程数,即:并发处理的最大请求数,默认值为75
acceptCount:允许的最大连接数,应大于等于maxProcessors,默认值为100
enableLookups:是否反查域名,取值为:true或false。为了提高处理能力,应设置为false
connectionTimeout:网络连接超时,单位:毫秒。设置为0表示永不超时,这样设置有隐患的。通常可设置为30000毫秒。
其中和最大连接数相关的参数为maxProcessors和acceptCount。如果要加大并发连接数,应同时加大这两个参数。
首先,在这里:http://tomcat.apache.org/ 我们点击左侧导航栏中“Documentation”下的Tomcat 7.0,进入到这个链接中:http://tomcat.apache.org/tomcat-7.0-doc/index.html ,详细的信息我们不用都看,在左侧导航栏中有一个链接Configuration,我们点进去之后,再点击其左侧导航栏中connector一项的HTTP,就进入到HTTP连接数及其他相关属性的设置页面了。在这里(http://tomcat.apache.org/tomcat-7.0-doc/config/http.html)我们可以看到,在Connector的属性配置中,压根就没有maxProcessors等的设置选项。其中这句话已经介绍得很清楚:
If more simultaneous requests are received than can be handled by the currently available request processing threads, additional threads will be created up to the configured maximum (the value of the
maxThreadsattribute).
If still more simultaneous requests are received, they are stacked up inside the server socket created by the Connector, up to the configured maximum (the value of the
acceptCountattribute).
所以我们需要设置的是maxThreads和acceptCount这两个值:
其中,maxThreads的介绍如下:
The maximum number of request processing threads to be created by this Connector, which therefore determines the maximum number of simultaneous requests that can be handled. If not specified, this attribute is set to 200.
If an executor is associated with this connector, this attribute is ignored as the connector will execute tasks using the executor rather than an internal thread pool.
而acceptCount的介绍为:
The maximum queue length for incoming connection requests when all possible request processing threads are in use. Any requests received when the queue is full will be refused. The default value is 100.
所以两者的默认值分别是200和100,要调整Tomcat的默认最大连接数,可以增加这两个属性的值,并且使acceptCount大于等于maxThreads:
<Connector port="8080" protocol="HTTP/1.1"
connectionTimeout="20000"
redirectPort="8443" acceptCount="500" maxThreads="400" />
相关文章推荐
- java-模拟tomcat服务器
- i-jetty环境搭配与编译
- 实现单Tomcat多Server配置
- 生产环境下的Tomcat配置
- Linux部署Tomcat服务器
- jenkins------结合maven将svn项目自动部署到tomcat下
- 如何搞定tomcat这只喵~
- tomcat在opensuse下开机自启失败的原因分析及解决方法
- jsp项目中更改tomcat的默认index.jsp访问路径的方法
- Tomcat 多端口 多应用
- 服务器远程超出最大连接数的原因及解决
- tomcat 5.0 + apache 2.0 完全安装步骤详解
- Tomcat安全设置 win2003 下tomcat权限限制
- Jsp和PHP共用80端口整合Apache和Tomcat(访问时无需加端口号)
- Tomcat服务器 安全设置第1/3页
- tomcat 6.0.20在一个机器上安装多个服务的方法
- Tomcat 5.5 数据库连接池配置
- 远程桌面超出最大连接数的解决方法
- Tomcat内存溢出分析及解决方法