POJ 3436:ACM Computer Factory 网络流
2015-10-27 21:11
585 查看
ACM Computer Factory
Description
As you know, all the computers used for ACM contests must be identical, so the participants compete on equal terms. That is why all these computers are historically produced at the same factory.
Every ACM computer consists of P parts. When all these parts are present, the computer is ready and can be shipped to one of the numerous ACM contests.
Computer manufacturing is fully automated by using N various machines. Each machine removes some parts from a half-finished computer and adds some new parts (removing of parts is sometimes necessary as the parts cannot be added to a computer in
arbitrary order). Each machine is described by its performance (measured in computers per hour), input and output specification.
Input specification describes which parts must be present in a half-finished computer for the machine to be able to operate on it. The specification is a set of P numbers 0, 1 or 2 (one number for each part), where 0 means that corresponding part
must not be present, 1 — the part is required, 2 — presence of the part doesn't matter.
Output specification describes the result of the operation, and is a set of P numbers 0 or 1, where 0 means that the part is absent, 1 — the part is present.
The machines are connected by very fast production lines so that delivery time is negligibly small compared to production time.
After many years of operation the overall performance of the ACM Computer Factory became insufficient for satisfying the growing contest needs. That is why ACM directorate decided to upgrade the factory.
As different machines were installed in different time periods, they were often not optimally connected to the existing factory machines. It was noted that the easiest way to upgrade the factory is to rearrange production lines. ACM directorate decided to
entrust you with solving this problem.
Input
Input file contains integers P N, then N descriptions of the machines. The description of ith machine is represented as by 2 P + 1 integers Qi Si,1 Si,2...Si,P Di,1 Di,2...Di,P,
where Qi specifies performance, Si,j — input specification for part j, Di,k— output specification for part k.
Constraints
1 ≤ P ≤ 10, 1 ≤ N ≤ 50, 1 ≤ Qi ≤ 10000
Output
Output the maximum possible overall performance, then M — number of connections that must be made, then M descriptions of the connections. Each connection between machines A and B must be described by three positive numbers A B W,
where W is the number of computers delivered from A to B per hour.
If several solutions exist, output any of them.
Sample Input
Sample Output
Hint
Bold texts appearing in the sample sections are informative and do not form part of the actual data.
这个题的题意是现在有m台机器,一台机器有n个输入限制(0代表该部件必须没有,1代表该部件必须有,2代表该部件可有可无),n个输出条件。满足输入限制的这台机器才能工作,然后每一台机器都有自己的速度,问这些台机器最多能组成多快的机器,然后每个部分流是多少。
网络流的好题啊。建一个超级源点(输出全部为0,这样才能够与输入全部为0的那些机器接上),一个超级汇点(输入全部为1,这样才能与输出全部为1的机器接上)。然后将每一对能满足输入输出条件的两个点连接起来,容量是两个速度的最小值。求整个网络的最大流。
代码:
Time Limit: 1000MS | Memory Limit: 65536K | |||
Total Submissions: 6247 | Accepted: 2178 | Special Judge |
As you know, all the computers used for ACM contests must be identical, so the participants compete on equal terms. That is why all these computers are historically produced at the same factory.
Every ACM computer consists of P parts. When all these parts are present, the computer is ready and can be shipped to one of the numerous ACM contests.
Computer manufacturing is fully automated by using N various machines. Each machine removes some parts from a half-finished computer and adds some new parts (removing of parts is sometimes necessary as the parts cannot be added to a computer in
arbitrary order). Each machine is described by its performance (measured in computers per hour), input and output specification.
Input specification describes which parts must be present in a half-finished computer for the machine to be able to operate on it. The specification is a set of P numbers 0, 1 or 2 (one number for each part), where 0 means that corresponding part
must not be present, 1 — the part is required, 2 — presence of the part doesn't matter.
Output specification describes the result of the operation, and is a set of P numbers 0 or 1, where 0 means that the part is absent, 1 — the part is present.
The machines are connected by very fast production lines so that delivery time is negligibly small compared to production time.
After many years of operation the overall performance of the ACM Computer Factory became insufficient for satisfying the growing contest needs. That is why ACM directorate decided to upgrade the factory.
As different machines were installed in different time periods, they were often not optimally connected to the existing factory machines. It was noted that the easiest way to upgrade the factory is to rearrange production lines. ACM directorate decided to
entrust you with solving this problem.
Input
Input file contains integers P N, then N descriptions of the machines. The description of ith machine is represented as by 2 P + 1 integers Qi Si,1 Si,2...Si,P Di,1 Di,2...Di,P,
where Qi specifies performance, Si,j — input specification for part j, Di,k— output specification for part k.
Constraints
1 ≤ P ≤ 10, 1 ≤ N ≤ 50, 1 ≤ Qi ≤ 10000
Output
Output the maximum possible overall performance, then M — number of connections that must be made, then M descriptions of the connections. Each connection between machines A and B must be described by three positive numbers A B W,
where W is the number of computers delivered from A to B per hour.
If several solutions exist, output any of them.
Sample Input
Sample input 1 3 4 15 0 0 0 0 1 0 10 0 0 0 0 1 1 30 0 1 2 1 1 1 3 0 2 1 1 1 1 Sample input 2 3 5 5 0 0 0 0 1 0 100 0 1 0 1 0 1 3 0 1 0 1 1 0 1 1 0 1 1 1 0 300 1 1 2 1 1 1 Sample input 3 2 2 100 0 0 1 0 200 0 1 1 1
Sample Output
Sample output 1 25 2 1 3 15 2 3 10 Sample output 2 4 5 1 3 3 3 5 3 1 2 1 2 4 1 4 5 1 Sample output 3 0 0
Hint
Bold texts appearing in the sample sections are informative and do not form part of the actual data.
这个题的题意是现在有m台机器,一台机器有n个输入限制(0代表该部件必须没有,1代表该部件必须有,2代表该部件可有可无),n个输出条件。满足输入限制的这台机器才能工作,然后每一台机器都有自己的速度,问这些台机器最多能组成多快的机器,然后每个部分流是多少。
网络流的好题啊。建一个超级源点(输出全部为0,这样才能够与输入全部为0的那些机器接上),一个超级汇点(输入全部为1,这样才能与输出全部为1的机器接上)。然后将每一对能满足输入输出条件的两个点连接起来,容量是两个速度的最小值。求整个网络的最大流。
代码:
#include <iostream> #include <algorithm> #include <cmath> #include <vector> #include <string> #include <queue> #include <cstring> #pragma warning(disable:4996) using namespace std; const int sum = 201; const int INF = 99999999; int cap[sum][sum], flow[sum][sum], in[sum][sum], a[sum], p[sum]; int p2, n; void Edmonds_Karp() { int u, t, result = 0; queue <int> s; while (s.size())s.pop(); while (1) { memset(a, 0, sizeof(a)); memset(p, 0, sizeof(p)); a[0] = INF; s.push(0); while (s.size()) { u = s.front(); s.pop(); for (t = 0; t <= n + 1; t++) { if (!a[t] && flow[u][t]<cap[u][t]) { s.push(t); p[t] = u; a[t] = min(a[u], cap[u][t] - flow[u][t]);//要和之前的那个点,逐一比较,到M时就是整个路径的最小残量 } } } if (a[n + 1] == 0) break; result += a[n + 1]; for (u = n + 1; u != 0; u = p[u]) { flow[p[u]][u] += a[n + 1]; flow[u][p[u]] -= a[n + 1]; } } cout << result << " "; } int main() { //freopen("i.txt", "r", stdin); //freopen("o.txt", "w", stdout); int i, j, k, u, v, value; while (scanf("%d%d", &p2, &n) == 2) { memset(cap, 0, sizeof(cap)); memset(flow, 0, sizeof(flow)); for (j = 0; j <= 2 * p2 + 1; j++) { in[0][j] = 0; in[n + 1][j] = 1; } for (i = 1; i <= n; i++) { for (j = 0; j<2 * p2 + 1; j++) { scanf("%d", &in[i][j]); } } for (i = 0; i <= n + 1; i++) { for (j = 0; j <= n + 1; j++) { if (i == j)continue; bool f = true; for (k = 1; k <= p2; k++) { if (!(in[j][k] == 2 || in[i][k + p2] == in[j][k])) f = false; } if (f&&i == 0) { cap[i][j] = in[j][0]; } else if (f&&j == n + 1) { cap[i][j] = in[i][0]; } else if (f) { cap[i][j] += min(in[i][0], in[j][0]); } } } Edmonds_Karp(); int cnt = 0; for (i = 1; i <= n; i++) { for (j = 1; j <= n; j++) { if (flow[i][j]>0) cnt++; } } cout << cnt << endl; for (i = 1; i <= n; i++) { for (j = 1; j <= n; j++) { if (flow[i][j]>0) { cout << i << " " << j << " " << flow[i][j] << endl; } } } } return 0; }
相关文章推荐
- Android的http协议
- select函数详解
- ng机器学习——神经网络
- IOS网络笔记--地图内容4(定位到当前位置)
- socket网络编程复习笔记(四):认识套接字函数
- py 爬取页面http://m.sohu.com 并存储
- Unity--动态加载网络图片和本地图片文件
- http中content-type头值-(MIME类型)
- RESTful Web API中的Http协议语义
- 【Android网络编程】获取网络图片,具有缓存功能
- 【转】HTTP Response Header 的 Content-Disposition
- 变更管理、信息系统安全管理及项目风险管理作业
- HTTP/1.1协议(中文归纳版)
- ubuntu限制本地网速
- IOS网络笔记--地图内容3(点击获取当前地址的具体坐标)
- 使用TCP从客户端上传图片到服务器端
- netstat查看网络信息
- httpclient4.3设置代理请求
- IOS网络笔记--地图内容2(正反向编码)
- 【工具类】安卓开发 HttpPost和HttpGet请求