oracle 存储过程
2015-09-17 11:08
288 查看
1 student 表:id name(50)
2 创建存储过程:命令窗口:create or replace procedure stu_proc as p_name varchar2(50);
begin
3 select name into p_name from student where id =1;
4 dbms_output.put_line(p_name);
5 end;
6 /
Procedure created
3:调用:call stu_proc ();
4:找到存储过程 : view ---test --然后执行
存储过程创建语法:
create or replace procedure 存储过程名(param1 in type,param2 out type)
as
变量1 类型(值范围);
变量2 类型(值范围);
Begin
Select count(*) into 变量1 from 表A where列名=param1;
If (判断条件) then
Select 列名 into 变量2 from 表A where列名=param1;
Dbms_output。Put_line(‘打印信息’);
Elsif (判断条件) then
Dbms_output。Put_line(‘打印信息’);
Else
Raise 异常名(NO_DATA_FOUND);
End if;
Exception
When others then
Rollback;
End;
注意事项:
1, 存储过程参数不带取值范围,in表示传入,out表示输出
2, 变量带取值范围,后面接分号
3, 在判断语句前最好先用count(*)函数判断是否存在该条操作记录
4, 用select 。。。into。。。给变量赋值
5, 在代码中抛异常用 raise+异常名
1.在oracle中,数据表别名不能加as,如:
select a.appname from appinfo a;-- 正确
select a.appname from appinfo as a;-- 错误
也许,是怕和oracle中的存储过程中的关键字as冲突的问题吧
2.在存储过程中,select某一字段时,后面必须紧跟into,如果select整个记录,利用游标的话就另当别论了。
select af.keynode into kn from APPFOUNDATION af where af.appid=aid and af.foundationid=fid;-- 有into,正确编译
select af.keynode from APPFOUNDATION af where af.appid=aid and af.foundationid=fid;-- 没有into,编译报错,提示:Compilation
Error: PLS-00428: an INTO clause is expected in this SELECT statement
3.在利用select...into...语法时,必须先确保数据库中有该条记录,否则会报出"no data found"异常。
可以在该语法之前,先利用select count(*) from 查看数据库中是否存在该记录,如果存在,再利用select...into...
4.在存储过程中,别名不能和字段名称相同,否则虽然编译可以通过,但在运行阶段会报错
select keynode into kn from APPFOUNDATION where appid=aid and foundationid=fid;-- 正确运行
select af.keynode into kn from APPFOUNDATION af where af.appid=appid and af.foundationid=foundationid;-- 运行阶段报错,提示
ORA-01422:exact fetch returns more than requested number of rows
5.在存储过程中,关于出现null的问题
假设有一个表A,定义如下:
create table A(
id varchar2(50) primary key not null,
vcount number(8) not null,
bid varchar2(50) not null -- 外键
);
如果在存储过程中,使用如下语句:
select sum(vcount) into fcount from A where bid='xxxxxx';
如果A表中不存在bid="xxxxxx"的记录,则fcount=null(即使fcount定义时设置了默认值,如:fcount number(8):=0依然无效,fcount还是会变成null),这样以后使用fcount时就可能有问题,所以在这里最好先判断一下:
if fcount is null then
fcount:=0;
end if;
这样就一切ok了。
6.Hibernate调用oracle存储过程
this.pnumberManager.getHibernateTemplate().execute(
new HibernateCallback() {
public Object doInHibernate(Session session)
throws HibernateException, SQLException {
CallableStatement cs = session
.connection()
.prepareCall("{call modifyapppnumber_remain(?)}");
cs.setString(1, foundationid);
cs.execute();
return null;
}
});
2 创建存储过程:命令窗口:create or replace procedure stu_proc as p_name varchar2(50);
begin
3 select name into p_name from student where id =1;
4 dbms_output.put_line(p_name);
5 end;
6 /
Procedure created
3:调用:call stu_proc ();
4:找到存储过程 : view ---test --然后执行
存储过程创建语法:
create or replace procedure 存储过程名(param1 in type,param2 out type)
as
变量1 类型(值范围);
变量2 类型(值范围);
Begin
Select count(*) into 变量1 from 表A where列名=param1;
If (判断条件) then
Select 列名 into 变量2 from 表A where列名=param1;
Dbms_output。Put_line(‘打印信息’);
Elsif (判断条件) then
Dbms_output。Put_line(‘打印信息’);
Else
Raise 异常名(NO_DATA_FOUND);
End if;
Exception
When others then
Rollback;
End;
注意事项:
1, 存储过程参数不带取值范围,in表示传入,out表示输出
2, 变量带取值范围,后面接分号
3, 在判断语句前最好先用count(*)函数判断是否存在该条操作记录
4, 用select 。。。into。。。给变量赋值
5, 在代码中抛异常用 raise+异常名
1.在oracle中,数据表别名不能加as,如:
select a.appname from appinfo a;-- 正确
select a.appname from appinfo as a;-- 错误
也许,是怕和oracle中的存储过程中的关键字as冲突的问题吧
2.在存储过程中,select某一字段时,后面必须紧跟into,如果select整个记录,利用游标的话就另当别论了。
select af.keynode into kn from APPFOUNDATION af where af.appid=aid and af.foundationid=fid;-- 有into,正确编译
select af.keynode from APPFOUNDATION af where af.appid=aid and af.foundationid=fid;-- 没有into,编译报错,提示:Compilation
Error: PLS-00428: an INTO clause is expected in this SELECT statement
3.在利用select...into...语法时,必须先确保数据库中有该条记录,否则会报出"no data found"异常。
可以在该语法之前,先利用select count(*) from 查看数据库中是否存在该记录,如果存在,再利用select...into...
4.在存储过程中,别名不能和字段名称相同,否则虽然编译可以通过,但在运行阶段会报错
select keynode into kn from APPFOUNDATION where appid=aid and foundationid=fid;-- 正确运行
select af.keynode into kn from APPFOUNDATION af where af.appid=appid and af.foundationid=foundationid;-- 运行阶段报错,提示
ORA-01422:exact fetch returns more than requested number of rows
5.在存储过程中,关于出现null的问题
假设有一个表A,定义如下:
create table A(
id varchar2(50) primary key not null,
vcount number(8) not null,
bid varchar2(50) not null -- 外键
);
如果在存储过程中,使用如下语句:
select sum(vcount) into fcount from A where bid='xxxxxx';
如果A表中不存在bid="xxxxxx"的记录,则fcount=null(即使fcount定义时设置了默认值,如:fcount number(8):=0依然无效,fcount还是会变成null),这样以后使用fcount时就可能有问题,所以在这里最好先判断一下:
if fcount is null then
fcount:=0;
end if;
这样就一切ok了。
6.Hibernate调用oracle存储过程
this.pnumberManager.getHibernateTemplate().execute(
new HibernateCallback() {
public Object doInHibernate(Session session)
throws HibernateException, SQLException {
CallableStatement cs = session
.connection()
.prepareCall("{call modifyapppnumber_remain(?)}");
cs.setString(1, foundationid);
cs.execute();
return null;
}
});
相关文章推荐
- 创建oracle定制定时执行任务
- ORACLE转义字符的那点事
- js相关(easyUI),触发器,ant,jbpm,hibernate二级缓存ehcache,Javamail,Lucene,jqplot,WebService,regex,struts2,oracle表空间
- Oracle 11g设置内存自动管理
- Oracle安装错误ora-00922(缺少或无效选项)
- 详解SQLServer和Oracle的分页查询
- Oracle知识整理笔记
- --查询Oracle表字段名称,类型,数据长度,注释的语句
- ORACLE索引回表访问
- 【Oracle】day04_子查询_分页查询_DECODE_排序_集合操作_高级分组
- 【Oracle】day03_查询语句_聚合函数_关联查询
- hibernate3.4 注解 oracle简单入门例子
- oracle 同一个表出现2个用户创建的同名触发器
- oracle按照主键索引查询不到数据
- 安装与配置Oracle Warehouse Builder 11.2.0.3
- Oracle hang 之sqlplus -prelim方法
- oracle11G手动建库
- Oracle学习之常见问题处理
- Oracle 序列 触发器的使用
- 更改Oracle数据库的编码格式,解决导入时ORA-12899错误