xmanger安装oracle调图形化界面报错解决方法
2015-09-09 18:35
477 查看
$ ./runInstaller
Starting Oracle Universal Installer...
Checking Temp space: must be greater than 120 MB. Actual 16652 MB Passed
Checking swap space: must be greater than 150 MB. Actual 8191 MB Passed
Checking monitor: must be configured to display at least 256 colors
>>> Could not execute auto check for display colors using command /usr/bin/xdpyinfo. Check if the Ded <<<<
Some requirement checks failed. You must fulfill these requirements before
continuing with the installation,
Continue? (y/n)
y
>>> Ignoring required pre-requisite failures. Continuing...
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2015-09-09_05-26-05PM. Please wait .
DISPLAY not set. Please set the DISPLAY and try again.
Depending on the Unix Shell, you can use one of the following commands as examples to set the DISPLAY e
- For csh: % setenv DISPLAY 192.168.1.128:0.0
- For sh, ksh and bash: $ DISPLAY=192.168.1.128:0.0; export DISPLAY
Use the following command to see what shell is being used:
echo $SHELL
Use the following command to view the current DISPLAY environment variable setting:
echo $DISPLAY
- Make sure that client users are authorized to connect to the X Server.
To enable client users to access the X Server, open an xterm, dtterm or xconsole as the user that startlowing command:
% xhost +
To test that the DISPLAY environment variable is set correctly, run a X11 based program that comes withch as 'xclock':
% <full path to xclock.. see below>
If you are not able to run xclock successfully, please refer to your PC-X Server or OS vendor for furth
Typical path for xclock: /usr/X11R6/bin/xclock
--解决方法,安装下面3个组件
yum groupinstall "Desktop"
yum groupinstall "X Window System"
yum groupinstall "KDE Desktop"
Starting Oracle Universal Installer...
Checking Temp space: must be greater than 120 MB. Actual 16652 MB Passed
Checking swap space: must be greater than 150 MB. Actual 8191 MB Passed
Checking monitor: must be configured to display at least 256 colors
>>> Could not execute auto check for display colors using command /usr/bin/xdpyinfo. Check if the Ded <<<<
Some requirement checks failed. You must fulfill these requirements before
continuing with the installation,
Continue? (y/n)
y
>>> Ignoring required pre-requisite failures. Continuing...
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2015-09-09_05-26-05PM. Please wait .
DISPLAY not set. Please set the DISPLAY and try again.
Depending on the Unix Shell, you can use one of the following commands as examples to set the DISPLAY e
- For csh: % setenv DISPLAY 192.168.1.128:0.0
- For sh, ksh and bash: $ DISPLAY=192.168.1.128:0.0; export DISPLAY
Use the following command to see what shell is being used:
echo $SHELL
Use the following command to view the current DISPLAY environment variable setting:
echo $DISPLAY
- Make sure that client users are authorized to connect to the X Server.
To enable client users to access the X Server, open an xterm, dtterm or xconsole as the user that startlowing command:
% xhost +
To test that the DISPLAY environment variable is set correctly, run a X11 based program that comes withch as 'xclock':
% <full path to xclock.. see below>
If you are not able to run xclock successfully, please refer to your PC-X Server or OS vendor for furth
Typical path for xclock: /usr/X11R6/bin/xclock
--解决方法,安装下面3个组件
yum groupinstall "Desktop"
yum groupinstall "X Window System"
yum groupinstall "KDE Desktop"
相关文章推荐
- Asp.Net+Oracle+ExtJs
- oracle系统表
- oracle系统表
- Oracle记录被另一个用户锁住
- 几种导出oracle中的数据为dmp文件的方法
- 如何确定或调整undo表空间的大小
- Oracle ORA-02020 : 过多的数据库链接在使用中解决步骤
- oracle特殊字符的ascii值
- Oracle使用spool方式导出SQL脚本
- oracle表空间使用率查询
- oracle表空间使用率查询
- Oracle数据库查询练习
- 删除用户下所有对象
- oracle 体系结构
- 临时表空间过大,重建临时表空间
- fedora22安装oracle11gr2
- Oracle exp备份导入注意的六个事项
- oracle错误之未知的命令开头imp忽略了剩余行解决方案
- CentOS 下安装Oracle 11g 报错ORA-01034: ORACLE not available
- Oracle的function