iOS自定义cell导致数据加载混乱
2015-08-01 11:05
453 查看
转载自:http://www.2cto.com/kf/201308/238449.html
UITableView继承自UIScrollview,是苹果为我们封装好的一个基于scroll的控件。上面主要是一个个的UITableViewCell,可以让UITableViewCell响应一些点击事件,也可以在UITableViewCell中加入UITextField或者UITextView等子视图,使得可以在cell上进行文字编辑。
UITableView中的cell可以有很多,一般会通过重用cell来达到节省内存的目的:通过为每个cell指定一个重用标识符(reuseIdentifier),即指定了单元格的种类,当cell滚出屏幕时,会将滚出屏幕的单元格放入重用的queue中,当某个未在屏幕上的单元格要显示的时候,就从这个queue中取出单元格进行重用。
但对于多变的自定义cell,有时这种重用机制会出错。比如,当一个cell含有一个UITextField的子类并被放在重用queue中以待重用,这时如果一个未包含任何子视图的cell要显示在屏幕上,就会取出并使用这个重用的cell显示在无任何子视图的cell中,这时候就会出错。
解决方法:
方法1 将获得cell的方法从- (UITableViewCell*)dequeueReusableCellWithIdentifier:(NSString*)identifier 换为-(UITableViewCell
*)cellForRowAtIndexPath:(NSIndexPath *)indexPath
重用机制调用的就是dequeueReusableCellWithIdentifier这个方法,方法的意思就是“出列可重用的cell”,因而只要将它换为cellForRowAtIndexPath(只从要更新的cell的那一行取出cell),就可以不使用重用机制,因而问题就可以得到解决,虽然可能会浪费一些空间。
示例代码:
- (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath
{
static NSString *CellIdentifier = @"Cell";
// UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:CellIdentifier]; //改为以下的方法
UITableViewCell *cell = [tableView cellForRowAtIndexPath:indexPath]; //根据indexPath准确地取出一行,而不是从cell重用队列中取出
if (cell == nil) {
cell = [[UITableViewCell alloc] initWithStyle:UITableViewCellStyleDefault reuseIdentifier:CellIdentifier];
}
//...其他代码
}
- (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath
{
static NSString *CellIdentifier = @"Cell";
// UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:CellIdentifier]; //改为以下的方法
UITableViewCell *cell = [tableView cellForRowAtIndexPath:indexPath]; //根据indexPath准确地取出一行,而不是从cell重用队列中取出
if (cell == nil) {
cell = [[UITableViewCell alloc] initWithStyle:UITableViewCellStyleDefault reuseIdentifier:CellIdentifier];
}
//...其他代码
}
方法2 通过为每个cell指定不同的重用标识符(reuseIdentifier)来解决。
重用机制是根据相同的标识符来重用cell的,标识符不同的cell不能彼此重用。于是我们将每个cell的标识符都设置为不同,就可以避免不同cell重用的问题了。
示例代码:
- (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath
{
NSString *CellIdentifier = [NSString stringWithFormat:@"Cell%d%d", [indexPath section], [indexPath row]];//以indexPath来唯一确定cell
UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:CellIdentifier]; //出列可重用的cell
if (cell == nil) {
cell = [[UITableViewCell alloc] initWithStyle:UITableViewCellStyleDefault reuseIdentifier:CellIdentifier];
}
//...其他代码
}
- (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath
{
NSString *CellIdentifier = [NSString stringWithFormat:@"Cell%d%d", [indexPath section], [indexPath row]];//以indexPath来唯一确定cell
UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:CellIdentifier]; //出列可重用的cell
if (cell == nil) {
cell = [[UITableViewCell alloc] initWithStyle:UITableViewCellStyleDefault reuseIdentifier:CellIdentifier];
}
//...其他代码
}
方法3 删除重用cell的所有子视图
这个方法是通过删除重用的cell的所有子视图,从而得到一个没有特殊格式的cell,供其他cell重用。
示例代码:
- (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath
{
static NSString *CellIdentifier = @"Cell";
UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:CellIdentifier]; //出列可重用的cell
if (cell == nil) {
cell = [[UITableViewCell alloc] initWithStyle:UITableViewCellStyleDefault reuseIdentifier:CellIdentifier];
}
else
{
//删除cell的所有子视图
while ([cell.contentView.subviews lastObject] != nil)
{
[(UIView*)[cell.contentView.subviews lastObject] removeFromSuperview];
}
}
//...其他代码
}
UITableView继承自UIScrollview,是苹果为我们封装好的一个基于scroll的控件。上面主要是一个个的UITableViewCell,可以让UITableViewCell响应一些点击事件,也可以在UITableViewCell中加入UITextField或者UITextView等子视图,使得可以在cell上进行文字编辑。
UITableView中的cell可以有很多,一般会通过重用cell来达到节省内存的目的:通过为每个cell指定一个重用标识符(reuseIdentifier),即指定了单元格的种类,当cell滚出屏幕时,会将滚出屏幕的单元格放入重用的queue中,当某个未在屏幕上的单元格要显示的时候,就从这个queue中取出单元格进行重用。
但对于多变的自定义cell,有时这种重用机制会出错。比如,当一个cell含有一个UITextField的子类并被放在重用queue中以待重用,这时如果一个未包含任何子视图的cell要显示在屏幕上,就会取出并使用这个重用的cell显示在无任何子视图的cell中,这时候就会出错。
解决方法:
方法1 将获得cell的方法从- (UITableViewCell*)dequeueReusableCellWithIdentifier:(NSString*)identifier 换为-(UITableViewCell
*)cellForRowAtIndexPath:(NSIndexPath *)indexPath
重用机制调用的就是dequeueReusableCellWithIdentifier这个方法,方法的意思就是“出列可重用的cell”,因而只要将它换为cellForRowAtIndexPath(只从要更新的cell的那一行取出cell),就可以不使用重用机制,因而问题就可以得到解决,虽然可能会浪费一些空间。
示例代码:
- (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath
{
static NSString *CellIdentifier = @"Cell";
// UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:CellIdentifier]; //改为以下的方法
UITableViewCell *cell = [tableView cellForRowAtIndexPath:indexPath]; //根据indexPath准确地取出一行,而不是从cell重用队列中取出
if (cell == nil) {
cell = [[UITableViewCell alloc] initWithStyle:UITableViewCellStyleDefault reuseIdentifier:CellIdentifier];
}
//...其他代码
}
- (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath
{
static NSString *CellIdentifier = @"Cell";
// UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:CellIdentifier]; //改为以下的方法
UITableViewCell *cell = [tableView cellForRowAtIndexPath:indexPath]; //根据indexPath准确地取出一行,而不是从cell重用队列中取出
if (cell == nil) {
cell = [[UITableViewCell alloc] initWithStyle:UITableViewCellStyleDefault reuseIdentifier:CellIdentifier];
}
//...其他代码
}
方法2 通过为每个cell指定不同的重用标识符(reuseIdentifier)来解决。
重用机制是根据相同的标识符来重用cell的,标识符不同的cell不能彼此重用。于是我们将每个cell的标识符都设置为不同,就可以避免不同cell重用的问题了。
示例代码:
- (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath
{
NSString *CellIdentifier = [NSString stringWithFormat:@"Cell%d%d", [indexPath section], [indexPath row]];//以indexPath来唯一确定cell
UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:CellIdentifier]; //出列可重用的cell
if (cell == nil) {
cell = [[UITableViewCell alloc] initWithStyle:UITableViewCellStyleDefault reuseIdentifier:CellIdentifier];
}
//...其他代码
}
- (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath
{
NSString *CellIdentifier = [NSString stringWithFormat:@"Cell%d%d", [indexPath section], [indexPath row]];//以indexPath来唯一确定cell
UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:CellIdentifier]; //出列可重用的cell
if (cell == nil) {
cell = [[UITableViewCell alloc] initWithStyle:UITableViewCellStyleDefault reuseIdentifier:CellIdentifier];
}
//...其他代码
}
方法3 删除重用cell的所有子视图
这个方法是通过删除重用的cell的所有子视图,从而得到一个没有特殊格式的cell,供其他cell重用。
示例代码:
- (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath
{
static NSString *CellIdentifier = @"Cell";
UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:CellIdentifier]; //出列可重用的cell
if (cell == nil) {
cell = [[UITableViewCell alloc] initWithStyle:UITableViewCellStyleDefault reuseIdentifier:CellIdentifier];
}
else
{
//删除cell的所有子视图
while ([cell.contentView.subviews lastObject] != nil)
{
[(UIView*)[cell.contentView.subviews lastObject] removeFromSuperview];
}
}
//...其他代码
}
相关文章推荐
- Lua性能优化技巧(五):削减、重用和回收
- PHP和Mysqlweb应用开发核心技术 第1部分 Php基础-3 代码组织和重用2
- JavaFX之TableView的使用详解
- tableView上面空出20个像素的解决办法
- IOS 学习笔记 —— tableView 使用详解(二)
- TableView
- Sass用法指南
- Openbiz 用最精锐的代码实现周边业务的高度重用
- TableView的基本使用
- 根据首字母查找单词
- 下拉放大tableView头视图
- 下拉 放大tableview上方 图片
- TableView详细解释
- tableView的上拉刷新和下拉刷新
- 开发学习笔记--UItableView
- 解决tableview出现多余行
- UITableView的用法详解
- IOS 解决tableView header 跟着滑的问题
- tableView的滑动删除
- tableView不能滚动,滚动后会回到第一个可视图