您的位置：首页 > 编程语言 > Go语言

开机logo切换逻辑深入研究

2015-07-16 12:47 519 查看

增加暗码命令切换开关机logo功能

u-boot logo显示原理：

1.————Little Kernel会在platform_early_init阶段首先会获取lcm params，其工作流

程就是透过读id找到现在插入的LCM，根据LCM的分辨率申请相应大小的frame buffer

并确定frame buffer起始地址

2. 为logo.bin预留4M Ram

3. 之后在platform_init阶段，直接将logo.bin载入到4M Ram中

4, 完成载入后，在platform_init中mt_disp_show_boot_logo();会调用

show_logo(0);完成第一张logo显示。其中的index=0代表在logo.bin中压缩的第一张

图片，logo.bin中的图片压缩顺序可以察看文件

mediatek\custom\common\lk\logo\rules.mk

2.————4.2的kernel logo显示原理：

Kernel logo的工作方式与U-boot logo不同，是透过init.rc中注册的

boot_logo_updater service完成读取raw data文件，进行绘画的，所以在kernel

logo只是经过了bmp向raw的转换，在目录mediatek\custom\common\lk\logo\下生成

raw data 文件boot_logo。之后透过脚本文件将boot_logo文件搬移到

out\target\product\xxxx\system\media\images下，打包为system.img，download

到手机种，并存放于/system/media/images目录下。

3.————4.2对于ipo快速开机，请在目录mediatek\external\ipod\bootlogo.cpp中的

mt65xx_disp_show_boot_logo();做相应修改

4.————4.4的kernel logo和ipo快速开机用的是同一个接口。

在boot_logo_updater.c的main中与4.2的方法不同使用了show_kernel_logo函数调用

显示了包在logo.bin中的kernel.logo，修改方法可以在alps\mediatek\external\libshowlogo\charging_animation.cpp

中对这部分代码进行尝试读取nv显示修改，kernel层的logoindex可以查看文件

mediatek\custom\common\lk\logo\rules.mk中kernel.bmp的顺序

void show_kernel_logo()

{

LOG_ANIM("[charging_animation: %s %d]show kernel logo, index = 38 \n",__FUNCTION__,__LINE__);

if (error_flag == 0)

{

anim_show_logo(kernel_logo_position);

}

}

由于快速开关机部分alps\mediatek\external\ipod\bootlogo.cpp

也是使用了此接口，若添加，应该就可以做到暗码修改了。

对于U-boot logo，只需要将不同分辨率的图片压缩至logo.bin中，在读取时根据不

同的NVflag显示相应的图片即可

而对于Kernel logo，我们需要将不同分辨率的boot_logo raw data文件生成出来并

copy到手机中，boot_logo_updater根据不同的分辨率进行识别，读取相应的logo文

件。在boot_logo_updater识别部分对NVflag进行判断，进而调用不同的boot_logo。

一、主要修改文件：

1.mediatek/external.git

boot_logo_custom这部分代码在4.4上是没有编译的，所以不用增加这部分的编译机制

这部分的logo是动画之前的那个logo,可以使用adb shell，cd 到/system/bin，执行

boot_logo_updater查看这个logo具体是哪张图片

diff --git a/boot_logo_updater/Android.mk b/boot_logo_updater/Android.mk

index 5a28913..1b046f8 100755

--- a/boot_logo_updater/Android.mk

+++ b/boot_logo_updater/Android.mk

@@ -66,3 +66,17 @@ LOCAL_SRC_FILES := custom/$(LOCAL_MODULE)

include $(BUILD_PREBUILT)

endif

+############################################################

+ifneq ($(strip $(MTK_PLATFORM)),)

+include $(CLEAR_VARS)

+

+LOCAL_MODULE := boot_logo_custom

+

+LOCAL_MODULE_CLASS := DATA

+LOCAL_MODULE_PATH := $(TARGET_OUT)/media/images

+

+LOCAL_GENERATE_CUSTOM_FOLDER := custom:lk/logo

+LOCAL_SRC_FILES := custom/$(LOCAL_MODULE)

+

+include $(BUILD_PREBUILT)

+endif

这部分脚本编译是为了将生成的boot_logo_custom搬到system/media/images下的

diff --git a/boot_logo_updater/boot_logo_updater.c b/boot_logo_updater/boot_logo_updater.c

index 5836f21..745d64f 100755

--- a/boot_logo_updater/boot_logo_updater.c

+++ b/boot_logo_updater/boot_logo_updater.c

@@ -93,7 +93,7 @@ extern void bootlogo_fb_init();

extern void bootlogo_fb_deinit();

*/

const char LOGO_PATH[] = "/system/media/images/boot_logo";

-

+const char LOGO_CUSTOM_PATH[] = "/system/media/images/boot_logo_custom";// **** add changeLogo 20140508

#define RGB565_TO_ARGB8888(x) \

((((x) & 0x1F) << 3) | \

(((x) & 0x7E0) << 5) | \

@@ -113,8 +113,8 @@ const char LOGO_PATH[] = "/system/media/images/boot_logo";

#define LCD_BACKLIGHT_PATH "/sys/class/leds/lcd-backlight/brightness"

#define BOOT_REASON_SYS_PROPERTY "sys.boot.reason"

#define BOOT_PACKAGE_SYS_PROPERTY "persist.sys.bootpackage"

-

-

+#define MAX_RETRY_COUNT 20 // **** add changeLogo 20140508

+#define uchar unsigned char

/*

* return value:

* 0: normal

@@ -210,7 +210,61 @@ void set_int_value(const char * path, const int value)

write_to_file(path, buf, strlen(buf));

}

-

+// **** add changeLogo 20140508 begin

+int do_read()

+{

+
int fd,of,i=0,n,sectorSize,index;

+

+
char *buffer = NULL;

+
sectorSize=512;

+
buffer = (char*)malloc(sectorSize);

+
if(buffer == NULL)

+
{

+
printf("ERROR buffer malloc fail!");

+
return -1;

+
}

+
memset(buffer, 0, sectorSize);

+
char PN[20];

+
sprintf(PN,"/dev/pro_info");

+
printf("PN:%s\n",PN);//open your raw data partiton

+

+
fd= open(PN,O_RDWR);

+
if(fd<= 0)

+
{

+
printf("ERROR open fail %d\n",fd);

+
return -1;

+
}

+

+
//read

+
buffer = NULL;

+
buffer = (char*)malloc(sectorSize);

+
if(buffer == NULL)

+
{

+
printf("ERROR buffer malloc fail!");

+
return -1;

+
}

+
of=lseek(fd,0,SEEK_SET);

+
printf("lseek offset: %d\n",of);

+
if(of == -1)

+
{

+
printf("ERROR lseek file fail!\n");

+
return -1;

+
}

+
memset(buffer,0,sectorSize);

+
n=read(fd,buffer,sectorSize);

+
if(n != sectorSize)

+
{

+
printf("ERROR read fail\n");

+
close(fd);

+
return -1;

+
}

+
printf("result:%s",buffer);

+
printf("(buffer+104):%s",*(buffer+104));

+
index = atoi(*(buffer+104));

+
close(fd);

+
return index;

+}

+// **** add changeLogo 20140508 end

//读取/dev/pro_info文件内的第104个字节，可以adb pull出来查看

int main(void)

{

@@ -279,12 +333,29 @@ int main(void)

printf("[boot_logo_updater] fbsize= %d\n",fbsize);

printf("[boot_logo_updater] rgb565_logo_size = %d\n",rgb565_logo_size);

// (3) open logo file

-

- if ((fd = open(LOGO_PATH, O_RDONLY)) < 0) {

- fprintf(stderr, "failed to open logo file: %s\n", LOGO_PATH);

- goto done;

- }

-

+// **** add changeLogo 20140508 begin

+#if MTK_COMMAND_SWITCH_LOGO

+ if(do_read()==0)

+ {

+ if ((fd = open(LOGO_PATH, O_RDONLY)) < 0) {

+ fprintf(stderr, "failed to open logo file: %s\n", LOGO_PATH);

+ goto done;

+ }

+ }

+ else if(do_read()==1)

+ {

+ if ((fd = open(LOGO_CUSTOM_PATH, O_RDONLY)) < 0) {

+ fprintf(stderr, "failed to open logo file: %s\n", LOGO_CUSTOM_PATH);

+ goto done;

+ }

+ }

+#else

+ if ((fd = open(LOGO_PATH, O_RDONLY)) < 0) {

+ fprintf(stderr, "failed to open logo file: %s\n", LOGO_PATH);

+ goto done;

+ }

+#endif

+// **** add changeLogo 20140508 end

// (4) map framebuffer

fbbuf = mmap(0, fbsize*2, PROT_READ|PROT_WRITE, MAP_SHARED, fb, 0);

2. mediatek/platorm.git

diff --git a/mt6572/lk/load_image.c b/mt6572/lk/load_image.c

此处是读取dev/pro_info中第104个字节的值存储到logoindex供mt_logo.c调用

old mode 100644

new mode 100755

index 5c8d0cb..9b0bc5a

--- a mediatek/platorm/mt6572/lk/load_image.c

+++ b mediatek/platorm/mt6572/lk/load_image.c

@@ -28,7 +28,7 @@ unsigned int g_rcimg_sz = 0;

unsigned int g_fcimg_sz = 0;

unsigned int g_kimg_sz = 0;

unsigned int g_rimg_sz = 0;

-

+unsigned char logoindex = 0;

#if 1

static int mboot_common_load_part_info(part_dev_t *dev, char *part_name, part_hdr_t *part_hdr)

@@ -168,6 +168,74 @@ exit:

return len;

}

+//Added by Dai@wingtech.com begin ------- **** add changeLogo 20140508 begin

+int mboot_common_load_part_get_logo_index(char *part_name, unsigned long addr)

+{

+ long len;

+
unsigned long begin;

+#ifdef MTK_EMMC_SUPPORT

+
unsigned long long start_addr;

+#else

+
unsigned long start_addr;

+#endif

+ part_t *part;

+ part_dev_t *dev;

+ //part_hdr_t *part_hdr;

+

+ dev = mt_part_get_device();

+ if (!dev)

+ {
return -ENODEV;

+ }

+

+ part = mt_part_get_partition(part_name);

+ if (!part)

+ {
return -ENOENT;

+ }

+

+#ifdef MTK_EMMC_SUPPORT

+
start_addr = (u64)part->startblk * BLK_SIZE;

+#else

+ start_addr = part->startblk * BLK_SIZE;

+#endif

+ printf("dai part_name = %s, start_addr = 0x%x",part_name,start_addr);

+

+ //Marked by Dai@wingtech.com: Not part_hdr in PRO_INFO partition.---------------------

+

+ //part_hdr = (part_hdr_t*)malloc(sizeof(part_hdr_t));

+

+ //if (!part_hdr)

+ //{
return -ENOMEM;

+ //}

+

+ //len = mboot_common_load_part_info(dev, part_name, part_hdr);

+ //if (len < 0) {

+ // len = -EINVAL;

+ // goto exit;

+ //}

+

+ //len = dev->read(dev, start_addr + sizeof(part_hdr_t), (uchar*)addr, part_hdr->info.dsize);

+ //Marked end.--------------------------------------------------------------------------

+

+
begin = get_timer(0);

+

+ len = dev->read(dev, start_addr , (uchar*)addr, 4096);

+ logoindex = (*(unsigned char *)(addr+104));

+ if (len < 0) {

+ printf("dai [%s] %s partition read error. LINE: %d\n", MODULE_NAME, part_name, __LINE__);

+ len = -EIO;

+ //goto exit;

+ }

+

+

+ //exit:

+ // if (part_hdr)

+ // free(part_hdr);

+

+ return len;

+}

+

+unsigned char data_buffer[256] ={0};

+//End of Added by Dai@wingtech.com ----- **** add changeLogo 20140508 end

/**********************************************************

* Routine: mboot_common_load_logo

@@ -179,6 +247,7 @@ int mboot_common_load_logo(unsigned long logo_addr, char* filename)

{

int ret;

long len;

+ int i;

#if (CONFIG_COMMANDS & CFG_CMD_FAT)

len = file_fat_read(filename, (unsigned char *)logo_addr, 0);

@@ -186,7 +255,19 @@ int mboot_common_load_logo(unsigned long logo_addr, char* filename)

if (len > 0)

return (int)len;

#endif

-

+// **** add changeLogo 20140508 begin

+#if MTK_COMMAND_SWITCH_LOGO

+ mboot_common_load_part_get_logo_index(PART_PRO_INFO, logo_addr);

+ //test code begin ++++

+ for(i=0;i<(128);i++)

+ {

+ data_buffer[i] = *(unsigned char*)(logo_addr+i);

+ printf("[Dai]result[%d]:--0x%x\n",i,data_buffer[i]);

+ }

+ printf("[Dai]result[104]:--0x%x\n",data_buffer[104]);

+ //end of test code -----

+#endif

+// **** add changeLogo 20140508 end

ret = mboot_common_load_part(PART_LOGO, logo_addr);

return ret;

@@ -911,8 +992,8 @@ int mboot_recovery_load_raw_part(char *part_name, unsigned long *addr, unsigned

len = -EIO;

goto exit;

}

-

- printf("[%s] Load '%s' partition to 0x%08X (%d bytes in %ld ms)\n", MODULE_NAME, part->name, addr, size, get_timer(begin));

+ // **** add changeLogo 20140508

+ printf("[%s] Load '%s' start_addr = %x partition to 0x%08X (%d bytes in %ld ms)\n", MODULE_NAME, part->name ,start_addr,addr, size, get_timer(begin));

exit:

return len;

diff --git a/mt6572/lk/mt_logo.c b/mt6572/lk/mt_logo.c

little kernel层的logo切换显示位置

old mode 100644

new mode 100755

index 36442e1..c10f0fa

--- a/mt6572/lk/mt_logo.c

+++ b/mt6572/lk/mt_logo.c

@@ -60,7 +60,7 @@

//#include <u-boot/zlib.h>

#include <lib/zlib.h>

-

+extern unsigned char logoindex;

// ---------------------------------------------------------------------------

// Local Variables

// ---------------------------------------------------------------------------

@@ -731,8 +731,25 @@ void mt_disp_show_boot_logo(void)

}

else

{

- show_logo(0);

- mt_disp_update(0, 0, CFG_DISPLAY_WIDTH, CFG_DISPLAY_HEIGHT);

+// **** add changeLogo 20140508 begin

+#if MTK_COMMAND_SWITCH_LOGO

+ if(logoindex==0)

+ {

+ show_logo(0);

+ mt_disp_update(0, 0, CFG_DISPLAY_WIDTH, CFG_DISPLAY_HEIGHT);

+ }

+ else

+ {

+ show_logo(44);

+ mt_disp_update(0, 0, CFG_DISPLAY_WIDTH, CFG_DISPLAY_HEIGHT);

+ }

+#else

+ {

+ show_logo(0);

+ mt_disp_update(0, 0, CFG_DISPLAY_WIDTH, CFG_DISPLAY_HEIGHT);

+ }

+#endif

+// **** add changeLogo 20140508 end

}

return;

解释下为什么mt_logo.c下的logo图片都是数字？这就要说明下little kernel的启动原理：

1. Little Kernel会在platform_early_init阶段首先会获取lcm params，其工作流

程就是透过读id找到现在插入的LCM，根据LCM的分辨率申请相应大小的frame buffer

并确定frame buffer起始地址

2. 为logo.bin预留4M Ram

3. 之后在platform_init阶段，直接将logo.bin载入到4M Ram中

4, 完成载入后，在platform_init中mt_disp_show_boot_logo();会调用

show_logo(0);完成第一张logo显示。其中的index=0代表在logo.bin中压缩的第一张

图片，logo.bin中的图片压缩顺序可以察看文件

mediatek\custom\common\lk\logo\rules.mk，如下

RESOURCE_OBJ_LIST := \

$(BOOT_LOGO_DIR)/$(BOOT_LOGO)/$(BOOT_LOGO)_uboot.raw \

$(BOOT_LOGO_DIR)/$(BOOT_LOGO)/$(BOOT_LOGO)_battery.raw \

$(BOOT_LOGO_DIR)/$(BOOT_LOGO)/$(BOOT_LOGO)_low_battery.raw \

$(BOOT_LOGO_DIR)/$(BOOT_LOGO)/$(BOOT_LOGO)_charger_ov.raw \

$(BOOT_LOGO_DIR)/$(BOOT_LOGO)/$(BOOT_LOGO)_num_0.raw \

$(BOOT_LOGO_DIR)/$(BOOT_LOGO)/$(BOOT_LOGO)_num_1.raw \

$(BOOT_LOGO_DIR)/$(BOOT_LOGO)/$(BOOT_LOGO)_num_2.raw \

$(BOOT_LOGO_DIR)/$(BOOT_LOGO)/$(BOOT_LOGO)_num_3.raw \

$(BOOT_LOGO_DIR)/$(BOOT_LOGO)/$(BOOT_LOGO)_num_4.raw \

$(BOOT_LOGO_DIR)/$(BOOT_LOGO)/$(BOOT_LOGO)_num_5.raw \

$(BOOT_LOGO_DIR)/$(BOOT_LOGO)/$(BOOT_LOGO)_num_6.raw \

$(BOOT_LOGO_DIR)/$(BOOT_LOGO)/$(BOOT_LOGO)_num_7.raw \

$(BOOT_LOGO_DIR)/$(BOOT_LOGO)/$(BOOT_LOGO)_num_8.raw \

$(BOOT_LOGO_DIR)/$(BOOT_LOGO)/$(BOOT_LOGO)_num_9.raw \

$(BOOT_LOGO_DIR)/$(BOOT_LOGO)/$(BOOT_LOGO)_num_percent.raw \

$(BOOT_LOGO_DIR)/$(BOOT_LOGO)/$(BOOT_LOGO)_bat_animation_01.raw

\

$(BOOT_LOGO_DIR)/$(BOOT_LOGO)/$(BOOT_LOGO)_bat_animation_02.raw

\

$(BOOT_LOGO_DIR)/$(BOOT_LOGO)/$(BOOT_LOGO)_bat_animation_03.raw

\

$(BOOT_LOGO_DIR)/$(BOOT_LOGO)/$(BOOT_LOGO)_bat_animation_04.raw

\

$(BOOT_LOGO_DIR)/$(BOOT_LOGO)/$(BOOT_LOGO)_bat_animation_05.raw

\

$(BOOT_LOGO_DIR)/$(BOOT_LOGO)/$(BOOT_LOGO)_bat_animation_06.raw

\

$(BOOT_LOGO_DIR)/$(BOOT_LOGO)/$(BOOT_LOGO)_bat_animation_07.raw

\

$(BOOT_LOGO_DIR)/$(BOOT_LOGO)/$(BOOT_LOGO)_bat_animation_08.raw

\

$(BOOT_LOGO_DIR)/$(BOOT_LOGO)/$(BOOT_LOGO)_bat_animation_09.raw

\

$(BOOT_LOGO_DIR)/$(BOOT_LOGO)/$(BOOT_LOGO)_bat_animation_10.raw

\

$(BOOT_LOGO_DIR)/$(BOOT_LOGO)/$(BOOT_LOGO)_bat_10_01.raw \

$(BOOT_LOGO_DIR)/$(BOOT_LOGO)/$(BOOT_LOGO)_bat_10_02.raw \

$(BOOT_LOGO_DIR)/$(BOOT_LOGO)/$(BOOT_LOGO)_bat_10_03.raw \

1.

2.

1.

2.

$(BOOT_LOGO_DIR)/$(BOOT_LOGO)/$(BOOT_LOGO)_bat_10_04.raw \

$(BOOT_LOGO_DIR)/$(BOOT_LOGO)/$(BOOT_LOGO)_bat_10_05.raw \

$(BOOT_LOGO_DIR)/$(BOOT_LOGO)/$(BOOT_LOGO)_bat_10_06.raw \

$(BOOT_LOGO_DIR)/$(BOOT_LOGO)/$(BOOT_LOGO)_bat_10_07.raw \

$(BOOT_LOGO_DIR)/$(BOOT_LOGO)/$(BOOT_LOGO)_bat_10_08.raw \

$(BOOT_LOGO_DIR)/$(BOOT_LOGO)/$(BOOT_LOGO)_bat_10_09.raw \

$(BOOT_LOGO_DIR)/$(BOOT_LOGO)/$(BOOT_LOGO)_bat_10_10.raw \

$(BOOT_LOGO_DIR)/$(BOOT_LOGO)/$(BOOT_LOGO)_bat_bg.raw \

$(BOOT_LOGO_DIR)/$(BOOT_LOGO)/$(BOOT_LOGO)_bat_img.raw \

$(BOOT_LOGO_DIR)/$(BOOT_LOGO)/$(BOOT_LOGO)_bat_100.raw \

3. mediatek/custom.git

BOOT_LOGO_CUSTOM_IMAGE这部分代码在4.4上是没有编译的，所以不用增加这部分的编译机制

进入mediatek\custom\common\uboot\logo文件夹运行update $(BOOT_LOGO),

diff --git a/common/lk/logo/custom/kernel.bmp b/common/lk/logo/custom/kernel.bmp

new file mode 100755

index 0000000..65f8d51

Binary files /dev/null and b/common/lk/logo/custom/kernel.bmp differ

diff --git a/common/lk/logo/custom/uboot.bmp b/common/lk/logo/custom/uboot.bmp

new file mode 100755

index 0000000..65f8d51

Binary files /dev/null and b/common/lk/logo/custom/uboot.bmp differ

diff --git a/common/lk/logo/rules.mk b/common/lk/logo/rules.mk

old mode 100644

new mode 100755

index 6e861a7..12a66a9

--- a/common/lk/logo/rules.mk

+++ b/common/lk/logo/rules.mk

@@ -9,6 +9,7 @@ ZPIPE := $(BOOT_LOGO_DIR)/tool/zpipe

BOOT_LOGO_RESOURCE := $(BUILDDIR)/$(BOOT_LOGO_DIR)/$(BOOT_LOGO).raw

LOGO_IMAGE := $(BUILDDIR)/logo.bin

BOOT_LOGO_IMAGE := $(LOCAL_DIR)/../../../../common/lk/logo/boot_logo

+BOOT_LOGO_CUSTOM_IMAGE := $(LOCAL_DIR)/../../../../common/lk/logo/boot_logo_custom

RESOURCE_OBJ_LIST := \

$(BOOT_LOGO_DIR)/$(BOOT_LOGO)/$(BOOT_LOGO)_uboot.raw \

$(BOOT_LOGO_DIR)/$(BOOT_LOGO)/$(BOOT_LOGO)_battery.raw \

@@ -53,15 +54,18 @@ RESOURCE_OBJ_LIST := \

$(BOOT_LOGO_DIR)/$(BOOT_LOGO)/$(BOOT_LOGO)_roll_1.raw \

$(BOOT_LOGO_DIR)/$(BOOT_LOGO)/$(BOOT_LOGO)_roll_2.raw \

$(BOOT_LOGO_DIR)/$(BOOT_LOGO)/$(BOOT_LOGO)_roll_3.raw \

- $(BOOT_LOGO_DIR)/$(BOOT_LOGO)/$(BOOT_LOGO)_roll_4.raw

+ $(BOOT_LOGO_DIR)/$(BOOT_LOGO)/$(BOOT_LOGO)_roll_4.raw \

+ $(BOOT_LOGO_DIR)/custom/uboot.raw \

+ $(BOOT_LOGO_DIR)/custom/kernel.raw

GENERATED += \

$(BOOT_LOGO_RESOURCE) \

$(LOGO_IMAGE) \

$(BOOT_LOGO_IMAGE) \

+ $(BOOT_LOGO_CUSTOM_IMAGE) \

$(addprefix $(BUILDDIR)/,$(RESOURCE_OBJ_LIST))

-all:: $(LOGO_IMAGE) $(BOOT_LOGO_IMAGE)

+all:: $(LOGO_IMAGE) $(BOOT_LOGO_IMAGE) $(BOOT_LOGO_CUSTOM_IMAGE)

$(LOGO_IMAGE):$(MKIMG) $(BOOT_LOGO_RESOURCE)

$(NOECHO) if [ ! -x $(MKIMG) ]; then chmod a+x $(MKIMG); fi

@@ -86,3 +90,9 @@ $(BOOT_LOGO_IMAGE): $(BMP_TO_RAW)

$(NOECHO) if [ ! -x $(BMP_TO_RAW) ]; then chmod a+x $(BMP_TO_RAW); fi

@echo "Compiling_BMP_TO_RAW_BOOT_LOGO"

$(BMP_TO_RAW) $(BOOT_LOGO_IMAGE) $(BOOT_LOGO_DIR)/$(BOOT_LOGO)/$(BOOT_LOGO)_kernel.bmp

+

+$(BOOT_LOGO_CUSTOM_IMAGE): $(BMP_TO_RAW)

+
@$(MKDIR)

+
$(NOECHO) if [ ! -x $(BMP_TO_RAW) ]; then chmod a+x $(BMP_TO_RAW); fi

+
@echo "Compiling_BMP_TO_RAW_BOOT_LOGO_CUSTOM"

+
$(BMP_TO_RAW) $(BOOT_LOGO_CUSTOM_IMAGE) $(BOOT_LOGO_DIR)/custom/kernel.bmp

4.build.git

这部分代码在4.4上是没有编译的

4.4把android层的boot_image移动到kernel层，使用logo.bin内

，所以不用增加这部分的编译机制

这部分和新增apk编译方式一样，新增boot_logo_custom的编译

diff --git a/target/product/common.mk b/target/product/common.mk

index 3d97676..e5acf49 100755

--- a/target/product/common.mk

+++ b/target/product/common.mk

@@ -403,6 +403,7 @@ PRODUCT_PACKAGES := \

ipohctl \

boot_logo_updater\

boot_logo\

+ boot_logo_custom\

bootanimation\

libtvoutjni \

libtvoutpattern \

5.packages/apps/Contacts.git

上层暗码切换，对nv进行读写操作

关键点AP_CFG_REEB_PRODUCT_INFO_LID = 35;不同的项目此值是不同的

需要数清楚新平台的Custom_NvRam_LID.h文件中此lid的index为多少，并改为正确的值

diff --git a/src/com/mediatek/contacts/SpecialCharSequenceMgrProxy.java b/src/com/mediatek/contacts/SpecialCharSequenceMgrProxy.java

index 3a0e091..b6ec321 100755

--- a/src/com/mediatek/contacts/SpecialCharSequenceMgrProxy.java

+++ b/src/com/mediatek/contacts/SpecialCharSequenceMgrProxy.java

@@ -33,7 +33,7 @@ import com.android.contacts.R;

import com.android.contacts.SpecialCharSequenceMgr;

import com.android.internal.telephony.ITelephony;

import com.android.internal.telephony.PhoneConstants;

-

+import android.os.IBinder;

//import com.mediatek.contacts.ContactsFeatureConstants.FeatureOption;

import com.mediatek.contacts.simcontact.SimCardUtils;

import com.mediatek.contacts.simcontact.SlotUtils;

@@ -54,10 +54,11 @@ public class SpecialCharSequenceMgrProxy {

private static final String ADN_PHONE_NUMBER_COLUMN_NAME = "number";

private static final String ADN_NAME_COLUMN_NAME = "name";

private static final String ADN_INDEX_COLUMN_NAME = "index";

- private static final String CHANGE_LOGO = "*#123321#";

-
private static final String MCCANDMNC = "*#1220#";

-
private static final String IMEI1_MODIFY =FeatureOption.WT_IMEI_MODIFY_CODE1; // sunlee add 20131024

-
private static final String IMEI2_MODIFY =FeatureOption.WT_IMEI_MODIFY_CODE2; // sunlee add 20131024

+ private static final String CHANGE_LOGO = FeatureOption.WT_CHANGE_LOGO_CODE;//"*#123321#";

+ private static final String MCCANDMNC = "*#1220#";

+ private static final String IMEI1_MODIFY =FeatureOption.WT_IMEI_MODIFY_CODE1; // sunlee add 20131024

+ private static final String IMEI2_MODIFY =FeatureOption.WT_IMEI_MODIFY_CODE2; // sunlee add 20131024

+ private static final int AP_CFG_REEB_PRODUCT_INFO_LID = 35;

/**

* M: [Gemini+] once a slot is ready, it would be put in this list and waiting for information query

* after this list is empty, it means all slot information has been retrieved.

@@ -84,6 +85,17 @@ public class SpecialCharSequenceMgrProxy {

static boolean handleChangeLogo(Context context, String input) {

if (input.equals(CHANGE_LOGO)) {

+ /* **** add changeLogo 20140508 begin */

+ if(FeatureOption.MTK_COMMAND_SWITCH_LOGO){

+ if (readData()==0)

+ {

+ writeData(1);

+ }else

+ {

+ writeData(0);

+ }

+ }

+ /* **** add changeLogo 20140508 end */

File iFile = new File("/flag/change.flag");

if (false == iFile.exists()) {

try {

@@ -103,7 +115,79 @@ public class SpecialCharSequenceMgrProxy {

}

return false;

}

-

+

+ /* **** add changeLogo 20140508 begin */

+ private static byte readData()

+
{

+
IBinder binder = ServiceManager.getService("NvRAMAgent");

+
NvRAMAgent agent = NvRAMAgent.Stub.asInterface(binder);

+
byte[] buff = null;

+
byte[] buff2 ={0};

+
try

+
{

+
buff = agent.readFile(AP_CFG_REEB_PRODUCT_INFO_LID);// read buffer from nvram

+
}

+
catch (RemoteException e)

+
{

+
e.printStackTrace();

+
}

+
buff2[0]= buff[104];

+
Log.i("readData", "buff:"+buff);

+
Log.i("readData", "buff[104]:"+buff[104]);

+
Log.i("readData", "buff2[0]:"+buff2[0]);

+

+
return buff2[0];

+
}

+
private static byte[] getBytes(int data)

+
{

+
byte[] bytes = new byte[4];

+
bytes[0] = (byte)(data&0xff);

+
bytes[1] = (byte)((data&0xff00)>>8);

+
bytes[2] = (byte)((data&0xff0000)>>16);

+
bytes[3] = (byte)((data&0xff000000)>>24);

+
return bytes;

+
}

+
private static void writeData(int n)

+
{

+
byte[] buff = null;

+
IBinder binder = ServiceManager.getService("NvRAMAgent");

+
NvRAMAgent agent = NvRAMAgent.Stub.asInterface(binder);

+
try

+
{

+
buff = agent.readFile(AP_CFG_REEB_PRODUCT_INFO_LID);// read buffer from nvram

+
}

+
catch (RemoteException e)

+
{

+
e.printStackTrace();

+
}

+
Log.i("writeData", "buff:"+buff);

+
byte[] write_buff = new byte[]{0,0,0,0};

+
int flag1 = n;

+
byte[] by = getBytes(flag1);

+
for(int i=0;i<4;i++)

+
write_buff[i] = by[i];

+
Log.i("writeData", "write_buff:"+buff[104]);

+
try

+
{
buff[104]=write_buff[0];

+
Log.i("writeData", "buff[104]:"+buff[104]);

+
Log.i("writeData", "write_buff[0]:"+write_buff[0]);

+
int flag = agent.writeFile(AP_CFG_REEB_PRODUCT_INFO_LID, buff);

+
if (flag > 0)

+
{

+
System.out.println("write success");

+
}

+
else

+
{

+
System.out.println("write failed");

+
}

+
}

+
catch (RemoteException e)

+
{

+
e.printStackTrace();

+
}

+

+
}

+ /* **** add changeLogo 20140508 end */

static boolean handleMCCMNC(Context context, String input) {

if (input.equals(MCCANDMNC)) {

TelephonyManager telManager = (TelephonyManager) context.getSystemService(Context.TELEPHONY_SERVICE);

A packages/apps/Contacts/src/com/mediatek/contacts/NvRAMAgent.java

这个文件是生成出来的，可以不用增加

packages/apps/Contacts/src/com/mediatek/contacts/SpecialCharSequenceMgrProxy.java

这个文件主要就是写入的暗码修改命令

针对不同的读取状态，进行状态切换

内容来自用户分享和网络整理，不保证内容的准确性，如有侵权内容，可联系管理员处理

标签：

相关文章推荐

新的分享

章节导航