HDU 1533 Going Home(最小费用流)
2015-06-23 22:33
543 查看
Going Home
Time Limit: 10000/5000 MS (Java/Others) Memory Limit: 65536/32768 K (Java/Others)Total Submission(s): 3278 Accepted Submission(s): 1661
Problem Description
On a grid map there are n little men and n houses. In each unit time, every little man can move one unit step, either horizontally, or vertically, to an adjacent point. For each little man, you need to pay a $1 travel fee for every
step he moves, until he enters a house. The task is complicated with the restriction that each house can accommodate only one little man.
Your task is to compute the minimum amount of money you need to pay in order to send these n little men into those n different houses. The input is a map of the scenario, a '.' means an empty space, an 'H' represents a house on that point, and am 'm' indicates
there is a little man on that point.
You can think of each point on the grid map as a quite large square, so it can hold n little men at the same time; also, it is okay if a little man steps on a grid with a house without entering that house.
Input
There are one or more test cases in the input. Each case starts with a line giving two integers N and M, where N is the number of rows of the map, and M is the number of columns. The rest of the input will be N lines describing the
map. You may assume both N and M are between 2 and 100, inclusive. There will be the same number of 'H's and 'm's on the map; and there will be at most 100 houses. Input will terminate with 0 0 for N and M.
Output
For each test case, output one line with the single integer, which is the minimum amount, in dollars, you need to pay.
Sample Input
2 2 .m H. 5 5 HH..m ..... ..... ..... mm..H 7 8 ...H.... ...H.... ...H.... mmmHmmmm ...H.... ...H.... ...H.... 0 0
Sample Output
2 10 28
Source
Pacific Northwest 2004
题意:给一个地图,标了人m和房H的位置,人数和房子数量相等,现在所有人要回各自的家,一个房只能容一个人。问所有人走的步数总和最少是多少?每一步只能走相邻的格子。
解题:最小费用流。
分3类点:1:源点S,汇点T。 2:人M。3:房H。
建图:(u , v , cap, cost):u-->v边容为cap,花费为cost
1):(S , M , 1 , 0)
2):(M , H , 1 , mindis):mindis表示人到房的最短距离
3:(H , T , 1 , 0)
#include<stdio.h> #include<string.h> #include<queue> using namespace std; const int MAXN = 10010; const int MAXM = 100100; const int INF = 1<<30; struct EDG{ int to,next,cap,flow; int cost; //单价 }edg[MAXM]; int head[MAXN],eid; int pre[MAXN], cost[MAXN] ; //点0~(n-1) void init(){ eid=0; memset(head,-1,sizeof(head)); } void addEdg(int u,int v,int cap,int cst){ edg[eid].to=v; edg[eid].next=head[u]; edg[eid].cost = cst; edg[eid].cap=cap; edg[eid].flow=0; head[u]=eid++; edg[eid].to=u; edg[eid].next=head[v]; edg[eid].cost = -cst; edg[eid].cap=0; edg[eid].flow=0; head[v]=eid++; } bool inq[MAXN]; bool spfa(int sNode,int eNode,int n){ queue<int>q; for(int i=0; i<n; i++){ inq[i]=false; cost[i]= INF; } cost[sNode]=0; inq[sNode]=1; pre[sNode]=-1; q.push(sNode); while(!q.empty()){ int u=q.front(); q.pop(); inq[u]=0; for(int i=head[u]; i!=-1; i=edg[i].next){ int v=edg[i].to; if(edg[i].cap-edg[i].flow>0 && cost[v]>cost[u]+edg[i].cost){ //在满足可增流的情况下,最小花费 cost[v] = cost[u]+edg[i].cost; pre[v]=i; //记录路径上的边 if(!inq[v]) q.push(v),inq[v]=1; } } } return cost[eNode]!=INF; //判断有没有增广路 } //反回的是最大流,最小花费为minCost int minCost_maxFlow(int sNode,int eNode ,int& minCost,int n){ int ans=0; while(spfa(sNode,eNode,n)){ int mint=INF; for(int i=pre[eNode]; i!=-1; i=pre[edg[i^1].to]){ if(mint>edg[i].cap-edg[i].flow) mint=edg[i].cap-edg[i].flow; } ans+=mint; for(int i=pre[eNode]; i!=-1; i=pre[edg[i^1].to]){ edg[i].flow+=mint; edg[i^1].flow-=mint; minCost+=mint*edg[i].cost; } } return ans; } int abs(int a){ return a>0?a:-a; } int buildGraph(char mapt[105][105],int n,int m){ int id[105][105] , k=1 ; for(int i=0; i<n; i++) for(int j=0; j<m; j++) if(mapt[i][j]=='H'||mapt[i][j]=='m') id[i][j]=k++; int s=0 , t = k; for(int i=0; i<n; i++) for(int j=0; j<m; j++) if(mapt[i][j]=='m'){ int u,v; u=id[i][j]; addEdg(s,u,1,0); for(int ti=0; ti<n; ti++) for(int tj=0; tj<m; tj++) if(mapt[ti][tj]=='H'){ v=id[ti][tj]; addEdg(u,v,1,abs(ti-i)+abs(tj-j)); } } else if(mapt[i][j]=='H') addEdg(id[i][j],t,1,0); return k; } int main(){ int n,m; char mapt[105][105]; while(scanf("%d%d",&n,&m)>0&&(n||m)){ for(int i=0; i<n; i++) scanf("%s",mapt[i]); init(); int s=0,t=buildGraph(mapt,n,m) , minCost=0; minCost_maxFlow(s,t,minCost,t+1); printf("%d\n",minCost); } }
相关文章推荐
- Django permission
- google play SDK 游戏排行榜的接入分享
- [Leetcode] Basic Calculator
- UVa 11292 The Dragon of Loowater 勇者斗恶龙
- goagent安装和使用
- Django文件上传
- GOF设计模式
- 20150427( Django,filter)
- com.Goods.ForEach
- Go学习1: Hello world
- [django]项目打包构建
- [django]项目打包构建
- uva 11090 Going in Cycle!! (求平均权值最小的环路)
- The last packet sent successfully to the server was 0 milliseconds ago
- goldengate一些参数整理
- 移除整个GoldenGate文件夹之后的恢复
- 利用未公开API获取终端会话闲置时间(Idle Time)和登入时间(Logon Time)
- django 简单会议室预约(2)
- Go语言结构示例
- go语言打印九九乘法表