Nginx编写HTTP模块:第一个Nginx HTTP模块 “Hello World!”
2015-05-01 21:49
567 查看
写一个Nginx的http模块,当向Nginx发送请求时,Nginx返回“Hello World!”
一、代码
文件名:ngx_http_mytest_module.c
二、将代码编译进Nginx
2.1. 将代码放到Nginx源码目录下
nginx源码目录为:/opt/nginx-1.5.4
在/opt/nginx-1.5.4/src下新建目录mytest,将代码放到该目录下。
2.2. 在mytest目录下编写文件config:
./configure --add-module=/opt/nginx-1.5.4/src/mytest
2.4. 编译安装nginx
make
make install
三、运行Nginx
Nginx默认安装到目录:/usr/local/nginx
3.1 修改配置文件
usr/local/nginx/conf/nginx.conf
3.2 运行Nginx
/usr/local/nginx/sbin/nginx -c /usr/local/nginx/conf/nginx.conf
四、结果
用浏览器访问Nginx:直接输入部署Nginx的机器IP地址
参考资料:
《深入理解Nginx:模块开发与架构解析》第三章 开发一个简单的HTTP模块
【Nginx】开发一个简单的HTTP模块:http://www.tuicool.com/articles/aAR3uu
一、代码
文件名:ngx_http_mytest_module.c
#include <ngx_config.h> #include <ngx_core.h> #include <ngx_event.h> #include <ngx_http.h> static ngx_int_t ngx_http_mytest_handler(ngx_http_request_t *r) { if (!(r->method & (NGX_HTTP_GET|NGX_HTTP_HEAD))) return NGX_HTTP_NOT_ALLOWED; ngx_int_t rc = ngx_http_discard_request_body(r); if (rc != NGX_OK) return rc; ngx_str_t type = ngx_string("text/plain"); ngx_str_t response = ngx_string("Hello World!"); r->headers_out.status = NGX_HTTP_OK; r->headers_out.content_length_n = response.len; r->headers_out.content_type = type; rc = ngx_http_send_header(r); if (rc == NGX_ERROR || rc > NGX_OK || r->header_only) return rc; ngx_buf_t *b = ngx_create_temp_buf(r->pool, response.len); if (b == NULL) return NGX_HTTP_INTERNAL_SERVER_ERROR; ngx_memcpy(b->pos, response.data, response.len); b->last = b->pos + response.len; b->last_buf = 1; ngx_chain_t out; out.buf = b; out.next = NULL; return ngx_http_output_filter(r, &out); } static char* ngx_http_mytest(ngx_conf_t *cf, ngx_command_t *cmd, void *conf) { ngx_http_core_loc_conf_t *clcf; clcf = ngx_http_conf_get_module_loc_conf(cf, ngx_http_core_module); clcf->handler = ngx_http_mytest_handler; return NGX_CONF_OK; } static ngx_command_t ngx_http_mytest_commands[] = { { ngx_string("mytest"), NGX_HTTP_MAIN_CONF | NGX_HTTP_SRV_CONF | NGX_HTTP_LOC_CONF | NGX_HTTP_LMT_CONF | NGX_CONF_NOARGS, ngx_http_mytest, NGX_HTTP_LOC_CONF_OFFSET, 0, NULL }, ngx_null_command }; static ngx_http_module_t ngx_http_mytest_module_ctx = { NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, }; ngx_module_t ngx_http_mytest_module = { NGX_MODULE_V1, &ngx_http_mytest_module_ctx, ngx_http_mytest_commands, NGX_HTTP_MODULE, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NGX_MODULE_V1_PADDING };
二、将代码编译进Nginx
2.1. 将代码放到Nginx源码目录下
nginx源码目录为:/opt/nginx-1.5.4
在/opt/nginx-1.5.4/src下新建目录mytest,将代码放到该目录下。
2.2. 在mytest目录下编写文件config:
ngx_addon_name=ngx_http_mytest_module HTTP_MODULES="$HTTP_MODULES ngx_http_mytest_module" NGX_ADDON_SRCS="$NGX_ADDON_SRCS $ngx_addon_dir/ngx_http_mytest_module.c"2.3. configure时添加自定义模块的路径:
./configure --add-module=/opt/nginx-1.5.4/src/mytest
2.4. 编译安装nginx
make
make install
三、运行Nginx
Nginx默认安装到目录:/usr/local/nginx
3.1 修改配置文件
usr/local/nginx/conf/nginx.conf
3.2 运行Nginx
/usr/local/nginx/sbin/nginx -c /usr/local/nginx/conf/nginx.conf
四、结果
用浏览器访问Nginx:直接输入部署Nginx的机器IP地址
参考资料:
《深入理解Nginx:模块开发与架构解析》第三章 开发一个简单的HTTP模块
【Nginx】开发一个简单的HTTP模块:http://www.tuicool.com/articles/aAR3uu
相关文章推荐
- nginx 编写简单HTTP模块以及nginx http handler的hello world示例编写
- Nginx编写HTTP模块:“Hello World”的第二种写法(HTTP模块介入阶段的2种方法)
- nginx 编写简单HTTP模块 hello world
- 【nginx源码学习与运用 九】搭建第一个nginx的http模块
- Nginx的第一个模块-Hello World
- nginx的HTTP模块编写
- 第一个模块,hello world 驱动编写
- nginx的HTTP模块编写
- 编写nginx的http模块需要注意一些细节
- Nginx源码分析与实践---(一)编写一个简单的Http模块
- nginx编写http模块编译报错
- nginx的HTTP模块编写
- nginx HTTP模块的hello world
- nginx模块之计算HTTP首包响应时间
- nginx 流量拷贝模块 ngx_http_mirror_module 安装试用
- 解剖Nginx·模块开发篇(1)跑起你的 Hello World 模块!
- 问题:C++编写的核心模块如何暴露给外部HTTP Web服务接口???
- Nginx HTTP模块的配置项管理【2】
- 解剖Nginx·模块开发篇(1)跑起你的 Hello World 模块!
- Nginx开发一个简单的HTTP过滤模块