清除bios设置/power-on password/CMOS(再发无法进入系统的情况下依然适用)
2015-01-12 15:27
423 查看
Turn off the computer and any attached devices, such as printers, monitors, and external drives.
Unplug all power cords from electrical outlets, and remove the cover.
Locate the Clear CMOS/Recovery jumper on the system board.
If necessary, remove any adapters that impede access to the Clear CMOS/Recovery jumper.
Move the jumper from the standard position (pins 1 and 2) to pins 2 and 3.
Replace any adapters that were removed.
Replace the cover.
Reconnect the power cords for the computer and monitor to electrical outlets.
Restart the computer, leave it on for approximately 10 seconds.
Turn off the computer by holding the power switch for approximately 5 seconds.
Unplug the power cords from electrical outlets.
Remove the cover.
If necessary, remove any adapters that impede access to the Clear CMOS/Recovery jumper.
Return the Clear CMOS/Recovery jumper to its original position.
Replace any adapters that were removed.
Replace the cover and reconnect any cables that were disconnected.
Turn on the computer. The computer should sound 2 beeps. The time and date should need to be set. If not, the procedure did not work.
After resetting the date, time, and saving the settings, exit the
System Configuration Utility.
Unplug all power cords from electrical outlets, and remove the cover.
Locate the Clear CMOS/Recovery jumper on the system board.
If necessary, remove any adapters that impede access to the Clear CMOS/Recovery jumper.
Move the jumper from the standard position (pins 1 and 2) to pins 2 and 3.
Replace any adapters that were removed.
Replace the cover.
Reconnect the power cords for the computer and monitor to electrical outlets.
Restart the computer, leave it on for approximately 10 seconds.
Turn off the computer by holding the power switch for approximately 5 seconds.
Unplug the power cords from electrical outlets.
Remove the cover.
If necessary, remove any adapters that impede access to the Clear CMOS/Recovery jumper.
Return the Clear CMOS/Recovery jumper to its original position.
Replace any adapters that were removed.
Replace the cover and reconnect any cables that were disconnected.
Turn on the computer. The computer should sound 2 beeps. The time and date should need to be set. If not, the procedure did not work.
After resetting the date, time, and saving the settings, exit the
System Configuration Utility.
相关文章推荐
- win10+ubuntu双系统无法进入ubuntu,bios设置修复grub
- VMWare workstation 9 启动虚拟系统开机速度过快以至无法按F2进入BIOS解决办法
- win8进入bios系统以及win8更改快速启动设置
- 戴尔dell服务器 PowerEdge server如何进入BIOS及恢复BIOS出厂设置
- 联想台式机进入BIOS系统,设置u盘启动
- BIOS中 关于电源设置的restore on Ac/ After Power loss
- Win8.1系统无法进入BIOS怎么办?Win8.1无法进入BIOS的解决方法
- dell c1100 安装系统(进入bios、超线程、磁盘阵列等设置方法)
- WIN XP 无法进入系统,蓝屏0xc000007b 急 60 按F2 或者DEL进bios下面
- 避免重装系统的情况下,修改IDE为ACHI模式(适合修改注册表后更改BIOS依然蓝屏) 2012/1/21
- 修复无法进入Linux系统方法,在双系统的情况下
- 关于EFI分区下win8.1系统无法进入bios的解决办法
- 笔记本怎么进入cmos和bios设置模式
- 解决:“开机设置了密码,可开机时却没有提示要输入密码的提示框,还是直接进入系统”和“系统无法让您登陆.请确定您的用户名及域名无误,然后再输入密码.密码的字母必须使用正确的大小写”
- 宏碁笔记本u盘装系统如何进入bios设置u盘启动图文教程
- BIOS恢复默认设置后无法进入操作系统的解决办法
- 在装win7旗舰版系统的时候无法进入到bios界面
- prjClearCMOS(prjClearBIOSPassword)- 破BIOS密码 - 清除CMOS - PC汇编 - Written by HackerJLY In Universty
- Ubuntu安装后,开机无法进入BIOS设置
- NFS客户端在/etc/fstab设置开机挂载后,开机时无法进入系统