Ubuntu下用docker安装redis镜像和使用redis容器分享
2014-12-31 17:38
881 查看
Ubuntu下用docker安装redis镜像和使用redis容器分享
1. 安装Ubuntu
2. 用Putty登录Ubuntu
Welcome to Ubuntu 14.04.1 LTS (GNU/Linux 3.13.0-40-generic x86_64)* Documentation: https://help.ubuntu.com/
System information as of Wed Dec 31 06:41:16 UTC 2014
System load: 0.01 Processes: 228
Usage of /: 6.0% of 28.80GB Users logged in: 0
Memory usage: 11% IP address for eth0: 10.205.178.22
Swap usage: 0% IP address for docker0: 172.17.42.1
Graph this data and manage this system at:
https://landscape.canonical.com/
Get cloud support with Ubuntu Advantage Cloud Guest:
http://www.ubuntu.com/business/services/cloud
3. 拉取redis镜像
root@jumping:~# sudo docker pull redis:latestredis:latest: The image you are pulling has been verified
eee46bd361c1: Pull complete
ff8650f588b2: Pull complete
130985f77ca0: Pull complete
4d81fff38a25: Pull complete
e6d98faa32e2: Pull complete
95d3849978c3: Pull complete
263f96794544: Pull complete
1ed9b7611cf5: Pull complete
451742990a7f: Pull complete
511136ea3c5a: Already exists
f10807909bc5: Already exists
f6fab3b798be: Already exists
1e6ac0ffed3b: Already exists
62ff5003ac9a: Already exists
e49d349e8a75: Already exists
61213f5a1710: Already exists
9feca322d1c7: Already exists
1aa8ce669b93: Already exists
Status: Downloaded newer image for redis:latest
root@jumping:~# sudo docker images
REPOSITORY TAG IMAGE ID CREATED VIRTUAL SIZE
redis latest 451742990a7f 11 days ago 111.2 MB
4. 启动redis容器
root@jumping:~# sudo docker run -t -i redis:latest[1] 31 Dec 02:56:57.870 # Warning: no config file specified, using the default config. In order to specify a config file use redis-server /path/to/redis.conf
_._
_.-``__ ''-._
_.-`` `. `_. ''-._ Redis 2.8.19 (00000000/0) 64 bit
.-`` .-```. ```\/ _.,_ ''-._
( ' , .-` | `, ) Running in stand alone mode
|`-._`-...-` __...-.``-._|'` _.-'| Port: 6379
| `-._ `._ / _.-' | PID: 1
`-._ `-._ `-./ _.-' _.-'
|`-._`-._ `-.__.-' _.-'_.-'|
| `-._`-._ _.-'_.-' | http://redis.io
`-._ `-._`-.__.-'_.-' _.-'
|`-._`-._ `-.__.-' _.-'_.-'|
| `-._`-._ _.-'_.-' |
`-._ `-._`-.__.-'_.-' _.-'
`-._ `-.__.-' _.-'
`-._ _.-'
`-.__.-'
[1] 31 Dec 02:56:57.890 # Server started, Redis version 2.8.19
[1] 31 Dec 02:56:57.890 # WARNING overcommit_memory is set to 0! Background save may fail under low memory condition. To fix this issue add 'vm.overcommit_memory = 1' to /etc/sysctl.conf and then reboot or run the command 'sysctl vm.overcommit_memory=1' for this to take effect.
[1] 31 Dec 02:56:57.891 # WARNING you have Transparent Huge Pages (THP) support enabled in your kernel. This will create latency and memory usage issues with Redis. To fix this issue run the command 'echo never > /sys/kernel/mm/transparent_hugepage/enabled' as root, and add it to your /etc/rc.local in order to retain the setting after a reboot. Redis must be restarted after THP is disabled.
[1] 31 Dec 02:56:57.891 # WARNING: The TCP backlog setting of 511 cannot be enforced because /proc/sys/net/core/somaxconn is set to the lower value of 128.
[1] 31 Dec 02:56:57.891 * The server is now ready to accept connections on port 6379
5.Redis容器启动了,那接下来怎么办?
办法:把putty关了,然后从新进来putty6. 怎么进入容器呢?
先安装NSenter:cd /tmp; curl http://ftp.sjtu.edu.cn/sites/ftp.kernel.org/pub/linux/utils/util-linux/v2.25/util-linux-2.25.tar.gz | tar -zxf-; cd util-linux-2.25;
sudo apt-get install build-essential
sudo apt-get make
./configure --without-ncurses
make nsenter && sudo cp nsenter /usr/local/bin
方法一:
PID=$(docker inspect --format "{{ .State.Pid }}" <container>)
nsenter --target $PID --mount --uts --ipc --net --pid
方法二:
安装脚本(脚本参照:https://github.com/jpetazzo/nsenter/blob/master/docker-enter)
wget -P ~ https://github.com/yeasy/docker_practice/raw/master/_local/.bashrc_docker;
echo "[ -f ~/.bashrc_docker ] && . ~/.bashrc_docker" >> ~/.bashrc; source ~/.bashrc
最后,调用docker-enter进入容器:
root@jumping:/tmp# docker-enter b430d6f4ff00 ls
dirname: invalid option -- 's'
Try 'dirname --help' for more information.
bin boot data dev entrypoint.sh etc home lib lib64 media mnt opt proc root run sbin selinux srv sys tmp usr var
root@b430d6f4ff00:~#
注:这里大家看到有错误,是因为脚本中用到$(dirname "$0""), 大家可以直接echo "$0",我这边显示的是-su
7. 测试redis命令
进入容器后可以用redis-cli ping测试可以连接上本机刚才启动的redis-server不,返回PONG说明连接成功。直接按redis-cli进入redis 命令测试下可以用不:
root@816ebd247014:~# redis-cli ping
PONG
root@816ebd247014:~# redis-cli
127.0.0.1:6379> set myname jumping
OK
127.0.0.1:6379> get myname
"jumping"
127.0.0.1:6379>
8. 这样就简单的把redis启动起来了,要用起来大家还要把端口影射到宿主机器上,然后可以通过客户端来调用Redis:http://redis.io/clients
相关文章推荐
- docker使用容器ubuntu安装mongodb
- Docker的Ubuntu镜像安装的容器无ifconfig命令和ping命令
- Windows10下的docker安装与入门 (二)使用docker引擎在容器中运行镜像
- Docker + Ubuntu 安装 nodejs,redis 生成新镜像
- Docker的Ubuntu镜像安装的容器无ifconfig命令和ping命令
- Docker的Ubuntu镜像安装的容器无ifconfig命令和ping命令
- 安装docker并使用默认镜像创建一个容器
- Ubuntu14.04中使用docker容器部署tomcat镜像+java web项目
- Ubuntu16.04.3安装Docker,配置镜像加速器及其基本使用
- Ubuntu 16.04 + ROS Kinetic 机器人操作系统学习镜像分享与使用安装说明
- Docker的ubuntu镜像安装的容器无ifconfig和ping命令的解决
- 用ubuntu安装redis的docker镜像
- Docker 使用ubuntu容器时,安装包包错:invoke-rc.d: policy-rc.d denied execution of start
- 【举例2】Docker环境部署过程,用ushios/lamp-ubuntu镜像,来创建容器,并安装禅道系统
- Ubuntu 16.04 + ROS Kinetic 机器人操作系统学习镜像分享与使用安装说明
- 使用docker安装ubuntu镜像
- Docker的Ubuntu镜像安装的容器无ifconfig命令和ping命令
- Ubuntu 安装和使用Docker容器
- Ubuntu 16.04 + ROS Kinetic 机器人操作系统学习镜像分享与使用安装说明
- Docker的Ubuntu镜像安装的容器无ifconfig命令和ping命令