struts2 -- interceptor(如何配置Interceptor)-转载自Forrest He大大
2014-10-16 10:59
232 查看
1.interceptor的配置
方法1. 普通配置法
<struts>
<package name="struts2" extends="struts-default">
<interceptors>
<interceptor name="myInterceptor" class="edu.hust.interceptor.MyInterceptor"></interceptor>
</interceptors>
<action name="register" class="edu.hust.action.RegisterAction">
<result name="input">/register.jsp</result>
<result>/result.jsp</result>
<!-- 在自定义interceptor并将其ref时, 系统会覆盖掉默认的interceptor-stack(defaultStack), 为了保证系统默认的defaultStack不受印象, 我们需要显式的将其引入 -->
<!-- 注意两个interceptor-ref的顺序, 顺序不同, 执行效果也不同: 先配置的先执行/后配置的先退出(先进后出) -->
<interceptor-ref name="defaultStack"></interceptor-ref>
<interceptor-ref name="myInterceptor"></interceptor-ref>
</action>
</package>
</struts>
方法2. 配置拦截器栈(即将多个interceptor串联的一种元素)。然后在<action>中引入该拦截器栈就可以了。
<struts>
<package name="struts2" extends="struts-default">
<interceptors>
<interceptor name="myInterceptor" class="edu.hust.interceptor.MyInterceptor"></interceptor>
<interceptor-stack name="myInterceptorStack">
<interceptor-ref name="myInterceptor"></interceptor-ref>
<interceptor-ref name="defaultStack"></interceptor-ref>
</interceptor-stack>
</interceptors>
<action name="register" class="edu.hust.action.RegisterAction">
<result name="input">/register.jsp</result>
<result>/result.jsp</result>
<interceptor-ref name="myInterceptorStack"></interceptor-ref>
</action>
</package>
</struts>
方法3. 修改默认拦截器,将自定义的拦截器栈定义为struts2的默认拦截器。
<struts>
<package name="struts2" extends="struts-default">
<interceptors>
<interceptor name="myInterceptor" class="edu.hust.interceptor.MyInterceptor"></interceptor>
<interceptor-stack name="myInterceptorStack">
<interceptor-ref name="myInterceptor"></interceptor-ref>
<interceptor-ref name="defaultStack"></interceptor-ref>
</interceptor-stack>
</interceptors>
<!-- 此默认interceptor是针对所有action的 -->
<!-- 如果某个action中引入了interceptor, 则在这个action中此默认interceptor就会失效 -->
<default-interceptor-ref name="myInterceptorStack"></default-interceptor-ref>
<action name="register" class="edu.hust.action.RegisterAction">
<result name="input">/register.jsp</result>
<result>/result.jsp</result>
</action>
</package>
</struts>
(2)拦截器(一个类,动态的将某些方法插入到目标对象的某方法的before、after);
(3)对目标对象生成的(动态)代理对象(代理对象内部方法综合了目标对象方法+拦截器方法)。程序最终执行的是目标对象的代理,而这个代理已经插入了interceptor。
拦截器作用:拦截action。interceptor相当于一个入口和出口,通过interceptor进入action,执行完action的代码再通过interceptor出去。
针对"struts2 -- interceptor(Interceptor怎么写)"这篇文章的MyInterceptor.class和MyInterceptor2.class。根据下面的配置文件执行程序
<struts>
<package name="struts2" extends="struts-default">
<interceptors>
<interceptor name="myInterceptor" class="edu.hust.interceptor.MyInterceptor"></interceptor>
<interceptor name="myInterceptor2" class="edu.hust.interceptor.MyInterceptor2"></interceptor>
<interceptor-stack name="myInterceptorStack">
<interceptor-ref name="myInterceptor"></interceptor-ref>
<interceptor-ref name="myInterceptor2"></interceptor-ref>
<interceptor-ref name="defaultStack"></interceptor-ref>
</interceptor-stack>
</interceptors>
<default-interceptor-ref name="myInterceptorStack"></default-interceptor-ref>
<action name="register" class="edu.hust.action.RegisterAction">
<result name="input">/register.jsp</result>
<result>/result.jsp</result>
</action>
</package>
</struts>
Console会得到以下打印输出
intercept start
intercept2 start
2008-9-19 19:42:06 com.opensymphony.xwork2.validator.ActionValidatorManagerFactory <clinit>
信息: Detected AnnotationActionValidatorManager, initializing it...
intercept2 finish
intercept finish
这个结果解释了"interceptor相当于一个入口和出口,通过interceptor进入action,执行完action的代码再通过interceptor出去"这句话。
3. extends MethodFilterInterceptor的拦截器如何配置哪些方法该拦截、哪些方法不该拦截(针对方法拦截的配置)
<struts>
<package name="struts2" extends="struts-default">
<interceptors>
<interceptor name="myInterceptor3" class="edu.hust.interceptor.MyInterceptor3"></interceptor>
</interceptors>
<action name="register" class="edu.hust.action.RegisterAction" method="queryAll">
<result name="input">/register.jsp</result>
<result>/result.jsp</result>
<!-- myInterceptor3拦截器只对RegisterAction中的queryAll()方法和insert()方法进行了拦截, 其他方法未进行拦截 -->
<interceptor-ref name="myInterceptor3">
<param name="includeMethods">queryAll, execute</param>
</interceptor-ref>
<interceptor-ref name="defaultStack"></interceptor-ref>
</action>
<action name="register" class="edu.hust.action.RegisterAction" method="insert">
<result name="input">/register.jsp</result>
<result>/result.jsp</result>
<interceptor-ref name="myInterceptor3">
<param name="includeMethods">queryAll, insert</param>
</interceptor-ref>
<interceptor-ref name="defaultStack"></interceptor-ref>
</action>
<action name="register" class="edu.hust.action.RegisterAction" method="update">
<result name="input">/register.jsp</result>
<result>/result.jsp</result>
<interceptor-ref name="myInterceptor3">
<param name="includeMethods">queryAll, insert</param>
</interceptor-ref>
<interceptor-ref name="defaultStack"></interceptor-ref>
</action>
</package>
</struts>
转载自:http://blog.csdn.net/ForWayfarer/article/details/2955586
2. Interceptor的角色对象
(1)拦截目标对象(被代理对象),这里目标对象就是action;
方法1. 普通配置法
<struts>
<package name="struts2" extends="struts-default">
<interceptors>
<interceptor name="myInterceptor" class="edu.hust.interceptor.MyInterceptor"></interceptor>
</interceptors>
<action name="register" class="edu.hust.action.RegisterAction">
<result name="input">/register.jsp</result>
<result>/result.jsp</result>
<!-- 在自定义interceptor并将其ref时, 系统会覆盖掉默认的interceptor-stack(defaultStack), 为了保证系统默认的defaultStack不受印象, 我们需要显式的将其引入 -->
<!-- 注意两个interceptor-ref的顺序, 顺序不同, 执行效果也不同: 先配置的先执行/后配置的先退出(先进后出) -->
<interceptor-ref name="defaultStack"></interceptor-ref>
<interceptor-ref name="myInterceptor"></interceptor-ref>
</action>
</package>
</struts>
方法2. 配置拦截器栈(即将多个interceptor串联的一种元素)。然后在<action>中引入该拦截器栈就可以了。
<struts>
<package name="struts2" extends="struts-default">
<interceptors>
<interceptor name="myInterceptor" class="edu.hust.interceptor.MyInterceptor"></interceptor>
<interceptor-stack name="myInterceptorStack">
<interceptor-ref name="myInterceptor"></interceptor-ref>
<interceptor-ref name="defaultStack"></interceptor-ref>
</interceptor-stack>
</interceptors>
<action name="register" class="edu.hust.action.RegisterAction">
<result name="input">/register.jsp</result>
<result>/result.jsp</result>
<interceptor-ref name="myInterceptorStack"></interceptor-ref>
</action>
</package>
</struts>
方法3. 修改默认拦截器,将自定义的拦截器栈定义为struts2的默认拦截器。
<struts>
<package name="struts2" extends="struts-default">
<interceptors>
<interceptor name="myInterceptor" class="edu.hust.interceptor.MyInterceptor"></interceptor>
<interceptor-stack name="myInterceptorStack">
<interceptor-ref name="myInterceptor"></interceptor-ref>
<interceptor-ref name="defaultStack"></interceptor-ref>
</interceptor-stack>
</interceptors>
<!-- 此默认interceptor是针对所有action的 -->
<!-- 如果某个action中引入了interceptor, 则在这个action中此默认interceptor就会失效 -->
<default-interceptor-ref name="myInterceptorStack"></default-interceptor-ref>
<action name="register" class="edu.hust.action.RegisterAction">
<result name="input">/register.jsp</result>
<result>/result.jsp</result>
</action>
</package>
</struts>
(2)拦截器(一个类,动态的将某些方法插入到目标对象的某方法的before、after);
(3)对目标对象生成的(动态)代理对象(代理对象内部方法综合了目标对象方法+拦截器方法)。程序最终执行的是目标对象的代理,而这个代理已经插入了interceptor。
拦截器作用:拦截action。interceptor相当于一个入口和出口,通过interceptor进入action,执行完action的代码再通过interceptor出去。
针对"struts2 -- interceptor(Interceptor怎么写)"这篇文章的MyInterceptor.class和MyInterceptor2.class。根据下面的配置文件执行程序
<struts>
<package name="struts2" extends="struts-default">
<interceptors>
<interceptor name="myInterceptor" class="edu.hust.interceptor.MyInterceptor"></interceptor>
<interceptor name="myInterceptor2" class="edu.hust.interceptor.MyInterceptor2"></interceptor>
<interceptor-stack name="myInterceptorStack">
<interceptor-ref name="myInterceptor"></interceptor-ref>
<interceptor-ref name="myInterceptor2"></interceptor-ref>
<interceptor-ref name="defaultStack"></interceptor-ref>
</interceptor-stack>
</interceptors>
<default-interceptor-ref name="myInterceptorStack"></default-interceptor-ref>
<action name="register" class="edu.hust.action.RegisterAction">
<result name="input">/register.jsp</result>
<result>/result.jsp</result>
</action>
</package>
</struts>
Console会得到以下打印输出
intercept start
intercept2 start
2008-9-19 19:42:06 com.opensymphony.xwork2.validator.ActionValidatorManagerFactory <clinit>
信息: Detected AnnotationActionValidatorManager, initializing it...
intercept2 finish
intercept finish
这个结果解释了"interceptor相当于一个入口和出口,通过interceptor进入action,执行完action的代码再通过interceptor出去"这句话。
3. extends MethodFilterInterceptor的拦截器如何配置哪些方法该拦截、哪些方法不该拦截(针对方法拦截的配置)
<struts>
<package name="struts2" extends="struts-default">
<interceptors>
<interceptor name="myInterceptor3" class="edu.hust.interceptor.MyInterceptor3"></interceptor>
</interceptors>
<action name="register" class="edu.hust.action.RegisterAction" method="queryAll">
<result name="input">/register.jsp</result>
<result>/result.jsp</result>
<!-- myInterceptor3拦截器只对RegisterAction中的queryAll()方法和insert()方法进行了拦截, 其他方法未进行拦截 -->
<interceptor-ref name="myInterceptor3">
<param name="includeMethods">queryAll, execute</param>
</interceptor-ref>
<interceptor-ref name="defaultStack"></interceptor-ref>
</action>
<action name="register" class="edu.hust.action.RegisterAction" method="insert">
<result name="input">/register.jsp</result>
<result>/result.jsp</result>
<interceptor-ref name="myInterceptor3">
<param name="includeMethods">queryAll, insert</param>
</interceptor-ref>
<interceptor-ref name="defaultStack"></interceptor-ref>
</action>
<action name="register" class="edu.hust.action.RegisterAction" method="update">
<result name="input">/register.jsp</result>
<result>/result.jsp</result>
<interceptor-ref name="myInterceptor3">
<param name="includeMethods">queryAll, insert</param>
</interceptor-ref>
<interceptor-ref name="defaultStack"></interceptor-ref>
</action>
</package>
</struts>
转载自:http://blog.csdn.net/ForWayfarer/article/details/2955586
2. Interceptor的角色对象
(1)拦截目标对象(被代理对象),这里目标对象就是action;
相关文章推荐
- struts2 -- interceptor(如何配置Interceptor)
- struts2 -- interceptor(如何配置Interceptor)
- struts2 -- interceptor(如何配置stuts2.xml之Interceptor)
- struts2 -- interceptor(如何配置Interceptor)
- struts2 -- interceptor(如何配置Interceptor)
- struts2 -- interceptor(如何配置Interceptor)
- [转载] 第一章 struts2入门与配置
- 转载:如何在 SQL Server 中使用配置选项调整内存使用量
- ArcIMS 投影问题 如何向地图配置文件中添加投影信息(转载)
- 如何使用.NET配置文件(转载)
- Struts2配置的Param如何调用?
- [转载] CRUD is bad for REST
- 转载:dudu:如何配置Windows Live Writer
- Matt Cooke: He Won't Be Suspended for the Rest of the NHL Season and Playoffs
- 详解Struts2如何与Freemarker配置(附源码和插件)
- 详解Struts2如何与Freemarker配置(附源码和插件)
- struts2如何配置全部result和全局exception
- [转载]如何加密ASP.NET配置数据[]
- VS.net2005写的程序如何在没有.Net FrameWork的机器上运行 --解决“由于应用程序的配置不正确,应用程序未能启动,重新安装应用程序可能会纠正这个问题”(转载)
- (转载)如何配置VMware中Linux系统网络