Bugzilla windows7 Apache2.2环境搭建

整整6天了，中秋节前，我一直在 mac OS环境下安装Bugzilla。

网上教程有不少都是windows或者linux（unix）下安装bugzilla，很少有mac OS安装的。

本来，我认为mac和Unix差不了多少，就按照Unix安装方法进行安装，况且Bugzilla官网上有mac的说明和文件。

too young！

我整整试了6天，国内的方法处理完了，翻墙去国外看教程。的确，国外有大牛，在mac下装成功，但是写的过程和国内unix安装过程一样，但是我就是安装不过去。

我先描述一下，自己mac遇到的问题。

首先，bugzilla 需要的软件  数据库（mysql） Apache perl 

ok，我mac安装过php，所以mysql 和apache 都有

perl更是系统自带。

上图







ok

接下来，下载bugzilla，解压缩到 /usr/local 



终端 cd /usr/local/bugzilla-4.4.4

perl ./checksetup.pl

perl install-module.pl --all

终端打开mysql

mysql -u root -p

输入密码

create database bugs;

grant all privileges on bugs.* to 'bugs'@'localhost' ;

flush privileges;

修改localconfig

sudo vim localconfig

$index.html='0' 改为 $index.html='1'

ok

配置apache

sudo vim /etc/apache2/httpd.conf

doucumentRoot 改为 /usr/local/bugzilla-4.4.4

去掉AddHandler.cgi  ＃号 

ok，基本完成。

（有些细节可以参考其他教程，因为6天中我看了很多教程，大同小异，自己也有些混乱，建议如果配置linux不用以上方法看其他教程，本文重心是讲为啥我没成功和如何字啊windows下配置）

之后再运行 sudo perl /usr/local/bugzilla-4.4.4/checksetup.pl

按理说，这一步 事bugzilla连接mysql，会在mysql bugs数据库中自动创建表，（此处详见补充）

请看



实际上 这里是说 少一个插件 我们吧localconfig中 db_check 改为0 之后


然后百度一下 这个问题的处理方法

 基本都是在讲 window下如何处理（用ppm命令） linux如何处理（用yum 命令）

基本就没 mac 的事了

所以，在第一步 连接数据库上都出现了 这么多问题，让我直接 放弃了 在mac上安装bugzilla

ok，下面，我们来讲如何在window下安装bugzilla

首先，安装mysql

创建bugs用户 创建bugs数据库 赋予所有权限 （和mac下一样）

注意 此时bugs是没有密码的当然你也可以加上密码

下载bugzilla 解压到随便路径 我的是 C:/program Files(x86)

下载ActivePerl模块并安装

下载Apache并安装 http://www.apache.org/dist/httpd/binaries/win32/



ok 

cmd 中打开Apache conf httpd.conf

修改里面的参数，由于修改的地方 太多  我直接贴出 修改后的 地方

－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－

#

# This is the main Apache HTTP server configuration file.  It contains the

# configuration directives that give the server its instructions.

# See <URL:http://httpd.apache.org/docs/2.2> for detailed information.

# In particular, see 

# <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>

# for a discussion of each configuration directive.

#

# Do NOT simply read the instructions in here without understanding

# what they do.  They're here only as hints or reminders.  If you are unsure

# consult the online docs. You have been warned.  

#

# Configuration and logfile names: If the filenames you specify for many

# of the server's control files begin with "/" (or "drive:/" for Win32), the

# server will use that explicit path.  If the filenames do *not* begin

# with "/", the value of ServerRoot is prepended -- so 'log/access_log'

# with ServerRoot set to '/www' will be interpreted by the

# server as '/www/log/access_log', where as '/log/access_log' will be

# interpreted as '/log/access_log'.

#

# NOTE: Where filenames are specified, you must use forward slashes

# instead of backslashes (e.g., "c:/apache" instead of "c:\apache").

# If a drive letter is omitted, the drive on which httpd.exe is located

# will be used by default.  It is recommended that you always supply

# an explicit drive letter in absolute paths to avoid confusion.

#

# ServerRoot: The top of the directory tree under which the server's

# configuration, error, and log files are kept.

#

# Do not add a slash at the end of the directory path.  If you point

# ServerRoot at a non-local disk, be sure to point the LockFile directive

# at a local disk.  If you wish to share the same ServerRoot for multiple

# httpd daemons, you will need to change at least LockFile and PidFile.

#

ServerRoot "C:/Program Files (x86)/Apache Software Foundation/Apache2.2"

#

# Listen: Allows you to bind Apache to specific IP addresses and/or

# ports, instead of the default. See also the <VirtualHost>

# directive.

#

# Change this to Listen on specific IP addresses as shown below to 

# prevent Apache from glomming onto all bound IP addresses.

#

#Listen 12.34.56.78:80

Listen 80

#

# Dynamic Shared Object (DSO) Support

#

# To be able to use the functionality of a module which was built as a DSO you

# have to place corresponding `LoadModule' lines at this location so the

# directives contained in it are actually available _before_ they are used.

# Statically compiled modules (those listed by `httpd -l') do not need

# to be loaded here.

#

# Example:

# LoadModule foo_module modules/mod_foo.so

#

LoadModule actions_module modules/mod_actions.so

LoadModule alias_module modules/mod_alias.so

LoadModule asis_module modules/mod_asis.so

LoadModule auth_basic_module modules/mod_auth_basic.so

#LoadModule auth_digest_module modules/mod_auth_digest.so

#LoadModule authn_alias_module modules/mod_authn_alias.so

#LoadModule authn_anon_module modules/mod_authn_anon.so

#LoadModule authn_dbd_module modules/mod_authn_dbd.so

#LoadModule authn_dbm_module modules/mod_authn_dbm.so

LoadModule authn_default_module modules/mod_authn_default.so

LoadModule authn_file_module modules/mod_authn_file.so

#LoadModule authnz_ldap_module modules/mod_authnz_ldap.so

#LoadModule authz_dbm_module modules/mod_authz_dbm.so

LoadModule authz_default_module modules/mod_authz_default.so

LoadModule authz_groupfile_module modules/mod_authz_groupfile.so

LoadModule authz_host_module modules/mod_authz_host.so

#LoadModule authz_owner_module modules/mod_authz_owner.so

LoadModule authz_user_module modules/mod_authz_user.so

LoadModule autoindex_module modules/mod_autoindex.so

#LoadModule cache_module modules/mod_cache.so

#LoadModule cern_meta_module modules/mod_cern_meta.so

LoadModule cgi_module modules/mod_cgi.so

#LoadModule charset_lite_module modules/mod_charset_lite.so

#LoadModule dav_module modules/mod_dav.so

#LoadModule dav_fs_module modules/mod_dav_fs.so

#LoadModule dav_lock_module modules/mod_dav_lock.so

#LoadModule dbd_module modules/mod_dbd.so

#LoadModule deflate_module modules/mod_deflate.so

LoadModule dir_module modules/mod_dir.so

#LoadModule disk_cache_module modules/mod_disk_cache.so

#LoadModule dumpio_module modules/mod_dumpio.so

LoadModule env_module modules/mod_env.so

#LoadModule expires_module modules/mod_expires.so

#LoadModule ext_filter_module modules/mod_ext_filter.so

#LoadModule file_cache_module modules/mod_file_cache.so

#LoadModule filter_module modules/mod_filter.so

#LoadModule headers_module modules/mod_headers.so

#LoadModule ident_module modules/mod_ident.so

#LoadModule imagemap_module modules/mod_imagemap.so

LoadModule include_module modules/mod_include.so

#LoadModule info_module modules/mod_info.so

LoadModule isapi_module modules/mod_isapi.so

#LoadModule ldap_module modules/mod_ldap.so

#LoadModule logio_module modules/mod_logio.so

LoadModule log_config_module modules/mod_log_config.so

#LoadModule log_forensic_module modules/mod_log_forensic.so

#LoadModule mem_cache_module modules/mod_mem_cache.so

LoadModule mime_module modules/mod_mime.so

#LoadModule mime_magic_module modules/mod_mime_magic.so

LoadModule negotiation_module modules/mod_negotiation.so

#LoadModule proxy_module modules/mod_proxy.so

#LoadModule proxy_ajp_module modules/mod_proxy_ajp.so

#LoadModule proxy_balancer_module modules/mod_proxy_balancer.so

#LoadModule proxy_connect_module modules/mod_proxy_connect.so

#LoadModule proxy_ftp_module modules/mod_proxy_ftp.so

#LoadModule proxy_http_module modules/mod_proxy_http.so

#LoadModule proxy_scgi_module modules/mod_proxy_scgi.so

#LoadModule reqtimeout_module modules/mod_reqtimeout.so

#LoadModule rewrite_module modules/mod_rewrite.so

LoadModule setenvif_module modules/mod_setenvif.so

#LoadModule speling_module modules/mod_speling.so

#LoadModule ssl_module modules/mod_ssl.so

#LoadModule status_module modules/mod_status.so

#LoadModule substitute_module modules/mod_substitute.so

#LoadModule unique_id_module modules/mod_unique_id.so

#LoadModule userdir_module modules/mod_userdir.so

#LoadModule usertrack_module modules/mod_usertrack.so

#LoadModule version_module modules/mod_version.so

#LoadModule vhost_alias_module modules/mod_vhost_alias.so

<IfModule !mpm_netware_module>

<IfModule !mpm_winnt_module>

#

# If you wish httpd to run as a different user or group, you must run

# httpd as root initially and it will switch.  

#

# User/Group: The name (or #number) of the user/group to run httpd as.

# It is usually good practice to create a dedicated user and group for

# running httpd, as with most system services.

#

User daemon

Group daemon

</IfModule>

</IfModule>

# 'Main' server configuration

#

# The directives in this section set up the values used by the 'main'

# server, which responds to any requests that aren't handled by a

# <VirtualHost> definition.  These values also provide defaults for

# any <VirtualHost> containers you may define later in the file.

#

# All of these directives may appear inside <VirtualHost> containers,

# in which case these default settings will be overridden for the

# virtual host being defined.

#

#

# ServerAdmin: Your address, where problems with the server should be

# e-mailed.  This address appears on some server-generated pages, such

# as error documents.  e.g. admin@your-domain.com

#

ServerAdmin admin@WIN-ONN0R0EL6KI.localdomain

#

# ServerName gives the name and port that the server uses to identify itself.

# This can often be determined automatically, but we recommend you specify

# it explicitly to prevent problems during startup.

#

# If your host doesn't have a registered DNS name, enter its IP address here.

#

#ServerName WIN-ONN0R0EL6KI.localdomain:80

#

# DocumentRoot: The directory out of which you will serve your

# documents. By default, all requests are taken from this directory, but

# symbolic links and aliases may be used to point to other locations.

#

DocumentRoot "C:\Program Files (x86)\bugzilla-4.2.10"

#

# Each directory to which Apache has access can be configured with respect

# to which services and features are allowed and/or disabled in that

# directory (and its subdirectories). 

#

# First, we configure the "default" to be a very restrictive set of 

# features.  

#

<Directory />

    Options FollowSymLinks

    AllowOverride None

    Order deny,allow

    Deny from all

</Directory>

#

# Note that from this point forward you must specifically allow

# particular features to be enabled - so if something's not working as

# you might expect, make sure that you have specifically enabled it

# below.

#

#

# This should be changed to whatever you set DocumentRoot to.

#

<Directory "C:\Program Files (x86)\bugzilla-4.2.10">

    #

    # Possible values for the Options directive are "None", "All",

    # or any combination of:

    #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews

    #

    # Note that "MultiViews" must be named *explicitly* --- "Options All"

    # doesn't give it to you.

    #

    # The Options directive is both complicated and important.  Please see

    # http://httpd.apache.org/docs/2.2/mod/core.html#options

    # for more information.

    #

    Options Indexes FollowSymLinks ExecCGI

    #

    # AllowOverride controls what directives may be placed in .htaccess files.

    # It can be "All", "None", or any combination of the keywords:

    #   Options FileInfo AuthConfig Limit

    #

    AllowOverride All

    #

    # Controls who can get stuff from this server.

    #

    Order allow,deny

    Allow from all

    #

    # Tell Apache to use Perl to execute .cgi

    #

 ScriptInterpreterSource Registry-Strict

</Directory>

#

# DirectoryIndex: sets the file that Apache will serve if a directory

# is requested.

#

<IfModule dir_module>

    DirectoryIndex index.html index.html.var index.cgi

</IfModule>

#

# The following lines prevent .htaccess and .htpasswd files from being 

# viewed by Web clients. 

#

<FilesMatch "^\.ht">

    Order allow,deny

    Deny from all

    Satisfy All

</FilesMatch>

#

# ErrorLog: The location of the error log file.

# If you do not specify an ErrorLog directive within a <VirtualHost>

# container, error messages relating to that virtual host will be

# logged here.  If you *do* define an error logfile for a <VirtualHost>

# container, that host's errors will be logged there and not here.

#

ErrorLog "logs/error.log"

#

# LogLevel: Control the number of messages logged to the error_log.

# Possible values include: debug, info, notice, warn, error, crit,

# alert, emerg.

#

LogLevel warn

<IfModule log_config_module>

    #

    # The following directives define some format nicknames for use with

    # a CustomLog directive (see below).

    #

    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined

    LogFormat "%h %l %u %t \"%r\" %>s %b" common

    <IfModule logio_module>

      # You need to enable mod_logio.c to use %I and %O

      LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio

    </IfModule>

    #

    # The location and format of the access logfile (Common Logfile Format).

    # If you do not define any access logfiles within a <VirtualHost>

    # container, they will be logged here.  Contrariwise, if you *do*

    # define per-<VirtualHost> access logfiles, transactions will be

    # logged therein and *not* in this file.

    #

    #CustomLog "logs/access.log" common

    #

    # If you prefer a logfile with access, agent, and referer information

    # (Combined Logfile Format) you can use the following directive.

    #

    #CustomLog "logs/access.log" combined

</IfModule>

<IfModule alias_module>

    #

    # Redirect: Allows you to tell clients about documents that used to 

    # exist in your server's namespace, but do not anymore. The client 

    # will make a new request for the document at its new location.

    # Example:

    # Redirect permanent /foo http://WIN-ONN0R0EL6KI.localdomain/bar

    #

    # Alias: Maps web paths into filesystem paths and is used to

    # access content that does not live under the DocumentRoot.

    # Example:

    # Alias /webpath /full/filesystem/path

    #

    # If you include a trailing / on /webpath then the server will

    # require it to be present in the URL.  You will also likely

    # need to provide a <Directory> section to allow access to

    # the filesystem path.

    #

    # ScriptAlias: This controls which directories contain server scripts. 

    # ScriptAliases are essentially the same as Aliases, except that

    # documents in the target directory are treated as applications and

    # run by the server when requested rather than as documents sent to the

    # client.  The same rules about trailing "/" apply to ScriptAlias

    # directives as to Alias.

    #

    ScriptAlias /cgi-bin/ "C:/Program Files (x86)/Apache Software Foundation/Apache2.2/cgi-bin/"

</IfModule>

<IfModule cgid_module>

    #

    # ScriptSock: On threaded servers, designate the path to the UNIX

    # socket used to communicate with the CGI daemon of mod_cgid.

    #

    #Scriptsock logs/cgisock

</IfModule>

#

# "C:/Program Files (x86)/Apache Software Foundation/Apache2.2/cgi-bin" should be changed to whatever your ScriptAliased

# CGI directory exists, if you have that configured.

#

<Directory "C:/Program Files (x86)/Apache Software Foundation/Apache2.2/cgi-bin">

    AllowOverride None

    Options None

    Order allow,deny

    Allow from all

</Directory>

#

# DefaultType: the default MIME type the server will use for a document

# if it cannot otherwise determine one, such as from filename extensions.

# If your server contains mostly text or HTML documents, "text/plain" is

# a good value.  If most of your content is binary, such as applications

# or images, you may want to use "application/octet-stream" instead to

# keep browsers from trying to display binary files as though they are

# text.

#

DefaultType text/plain

<IfModule mime_module>

    #

    # TypesConfig points to the file containing the list of mappings from

    # filename extension to MIME-type.

    #

    TypesConfig conf/mime.types

    #

    # AddType allows you to add to or override the MIME configuration

    # file specified in TypesConfig for specific file types.

    #

    #AddType application/x-gzip .tgz

    #

    # AddEncoding allows you to have certain browsers uncompress

    # information on the fly. Note: Not all browsers support this.

    #

    #AddEncoding x-compress .Z

    #AddEncoding x-gzip .gz .tgz

    #

    # If the AddEncoding directives above are commented-out, then you

    # probably should define those extensions to indicate media types:

    #

    AddType application/x-compress .Z

    AddType application/x-gzip .gz .tgz

    #

    # AddHandler allows you to map certain file extensions to "handlers":

    # actions unrelated to filetype. These can be either built into the server

    # or added with the Action directive (see below)

    #

    # To use CGI scripts outside of ScriptAliased directories:

    # (You will also need to add "ExecCGI" to the "Options" directive.)

    #

    AddHandler cgi-script .cgi

    # For type maps (negotiated resources):

    #AddHandler type-map var

    #

    # Filters allow you to process content before it is sent to the client.

    #

    # To parse .shtml files for server-side includes (SSI):

    # (You will also need to add "Includes" to the "Options" directive.)

    #

    #AddType text/html .shtml

    #AddOutputFilter INCLUDES .shtml

</IfModule>

#

# The mod_mime_magic module allows the server to use various hints from the

# contents of the file itself to determine its type.  The MIMEMagicFile

# directive tells the module where the hint definitions are located.

#

#MIMEMagicFile conf/magic

#

# Customizable error responses come in three flavors:

# 1) plain text 2) local redirects 3) external redirects

#

# Some examples:

#ErrorDocument 500 "The server made a boo boo."

#ErrorDocument 404 /missing.html

#ErrorDocument 404 "/cgi-bin/missing_handler.pl"

#ErrorDocument 402 http://WIN-ONN0R0EL6KI.localdomain/subscription_info.html

#

#

# MaxRanges: Maximum number of Ranges in a request before

# returning the entire resource, or one of the special

# values 'default', 'none' or 'unlimited'.

# Default setting is to accept 200 Ranges.

#MaxRanges unlimited

#

# EnableMMAP and EnableSendfile: On systems that support it, 

# memory-mapping or the sendfile syscall is used to deliver

# files.  This usually improves server performance, but must

# be turned off when serving from networked-mounted 

# filesystems or if support for these functions is otherwise

# broken on your system.

#

#EnableMMAP off

#EnableSendfile off

# Supplemental configuration

#

# The configuration files in the conf/extra/ directory can be 

# included to add extra features or to modify the default configuration of 

# the server, or you may simply copy their contents here and change as 

# necessary.

# Server-pool management (MPM specific)

#Include conf/extra/httpd-mpm.conf

# Multi-language error messages

#Include conf/extra/httpd-multilang-errordoc.conf

# Fancy directory listings

#Include conf/extra/httpd-autoindex.conf

# Language settings

#Include conf/extra/httpd-languages.conf

# User home directories

#Include conf/extra/httpd-userdir.conf

# Real-time info on requests and configuration

#Include conf/extra/httpd-info.conf

# Virtual hosts

#Include conf/extra/httpd-vhosts.conf

# Local access to the Apache HTTP Server Manual

#Include conf/extra/httpd-manual.conf

# Distributed authoring and versioning (WebDAV)

#Include conf/extra/httpd-dav.conf

# Various default settings

#Include conf/extra/httpd-default.conf

# Secure (SSL/TLS) connections

#Include conf/extra/httpd-ssl.conf

#

# Note: The following must must be present to support

#       starting without SSL on platforms with no /dev/random equivalent

#       but a statically compiled-in mod_ssl.

#

<IfModule ssl_module>

SSLRandomSeed startup builtin

SSLRandomSeed connect builtin

</IfModule>
－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－
大家仔细比对一下，自己的，具体哪里不懂请看
http://blog.sina.com.cn/s/blog_538461ee0100064d.html http://www.doc88.com/p-784490825352.html
修改注册表

regedit

在HKEY_CLASSES_ROOT中依次添加如图所示



并将数据改为 C:\Perl\bin\perl.exe -T

ok 用perl checksetup.pl

查看少哪些组建进行添加

添加  用

ppm install <组件名>

安装到如下图



基本ok 此时产生localconfig文件 打开进行修改

一处 db_post=0 改为 3306   mysql的端口

再运行 perl checksetup.pl

基本上  数据库中已经创建成功！

重启 apache

net stop apache2.2

net start apache2.2

ok

浏览器输入 localhost  

成功





其实如果不采用 apache的话 用iis也行，不过网上的教程都是  老版本的iis  win7下是iis7

有很多地方我都没找到  还是算了吧  毕竟  apache很熟悉

哈哈  

6天啊   终于松了一口气！

重点补充：

在第二次运行 perl ./checksetup.pl 的时候（即生成数据库）

有寄出需要设置的地方 说明一下



SMTP server hostname  是指 你email通知时 用的 server

我管理员邮箱 是qq邮箱  就写  smtp.qq.com 如果是163  就写 smtp.163.com

设置了这个参数 之后  如果 用管理员身份登录 bugzilla 在configuration  email 页面 你就会看到



也就是说 这跟系统发送邮件有关。

下面的几个参数 分别是指 管理员email 真实姓名 密码

用来登录bugzilla

补充  发送邮件

用管理员身份登录 bugzilla 在configuration  email 页面

mail_delivery_method
smtp

mailfrom  
376111258@qq.com

[b]use_mailer_queue
off
[/b]

[b]smtpserver
smtp.qq.com
[/b]

[b]smtp_username
376111258@qq.com
[/b]

[b]smtp_password
*****(此处为真实邮箱的密码）
[/b]

其余保持默认 保存

登陆到邮箱中（每个管理员邮箱都有这样设置 我只列举qq邮箱的）

设置-账户

[b]POP3/SMTP服务
[/b]





[b]勾选上
这两项 就OK了   管理员邮箱就能收到邮件[/b]