您的位置：首页 > 数据库 > Oracle

Oracle Database Installation Requirements Reference (8.0.5 to 11.2) (文档 ID 169706.1)

2014-03-19 10:05 417 查看

Jump to:

For 12c requirements refer to Note
1587357.1

AIX

HP-UX (PA-RISC and Itanium)

Linux x86

Linux x86-64

Linux Itanium

Linux on Power

Linux on zSeries

Mac OS X (PowerPC and x86-64)

Oracle Solaris (SPARC and
x86-64)

Tru64

Pre-Installation Scripts

OPatch

Related Documents

OS Specific Commands

Change History

Note 43208.1 Certified Compilers

Browse The Contents of Linux Brands ISOs
PURPOSE

--------------

This bulletin is produced to provide a central source for all the primary installation settings for the various mainstream unix platforms, e.g. IBM AIX, HP-UX, Oracle Solaris, Tru64, and Linux.

Careful comparison of the Installation Guide and the applicable release note for an OS/Oracle version has been done to ensure that this bulletin provides the most complete source of data in hopes that it will save time for each researching analyst.

Keeping the OS kernel current helps stabilize the system. Production systems should never run an out dated OS kernel version. As a best practice, Oracle recommends the OS kernel version be maintained to within 6 months of current. Please contact the OS vendor
directly for more information, risk exposure, and patching recommendations.

NOTE: Pre-compilers requirements are no longer addressed in this note, for a single source note

that addresses Pre-compiler/Compiler requirements, please refer to:

Note 43208.1 Certified Compilers

SCOPE & APPLICATION

-------------------------------------

This focus of this bulletin is on assisting the Oracle Unix installation community in resolving installation issues of the RDBMS.

This bulletin places in one document all the pertinent information related to installations that has been extracted from three different documents (Installation Guides, Release Notes, and SRNs)

DISCLAIMER

------------

Whenever a contradiction arises between this document and My Oracle Support (MOS)-Certification, My Oracle Support (MOS)-Certification is the Certification authority.

Users of this bulletin are obligated to provide real-time corrections/updates in the form of My Oracle Support (MOS) "Feedback" submissions to ensure the accuracy and up-to-date status of this bulletin.

PRE-INSTALLATION SCRIPTS

-------------------------------------

A decommissioned, non-supported script is still available to verify that the system has been configured correctly according to the 8.0.5 through 9.2 Installation Guides, please refer to the following My Oracle Support (MOS)
Note for details:

Note 189256.1 "UNIX: Script to Verify Installation Requirements for Oracle 8.0.5 to 9.2 versions of RDBMS"

The Remote Diagnostic Agent RDA (see Note 314422.1 for more info on RDA) has the capability to run a Pre-Installation check on several 10.1 and 10.2 Unix/Linux
Platforms.

Please refer to Note 250262.1 for specifics on how to run these Pre-Install scripts on your server.

OPatch FAQ

-------------------------------------

To apply one-off patches and Critical Patch Updates (CPUs) or Patch Set Update (PSU) on 9.2 and higer RDBMS versions you have to use the patching utility, OPatch.

Oracle Support requests you always use the latest version before applying any patches to your server, to get the latest version,

For 9.2 and 10.1 download Patch 6880880

For 10.2, 11.1 & 11.2 download Patch 6880880

Master Note For OPatch Note 293369.1

Oracle Version

11.2

11.1

10.2

10.1

9.2.0

9.0.1

8.1.7

8.1.6

8.1.5

8.0.6

8.0.5

AIX OS

(32- and 64-bit stands for Oracle not OS)

AIX 5L V5.3 TL 09 SP1 ("5300-09-01") or higher, 64 bit kernel (Part Number E10854-01)

AIX 6.1 TL 02 SP1 ("6100-02-01") or higher, 64-bit kernel

AIX 7.1 TL 00 SP1 ("7100-00-01") or higher, 64-bit kernel

AIX 6.1L, AIX 5L version 5.3, TL 05, Service Pack 06 (Part Number B32076-03), AIX 6L version 6.1, TL 00, Service Pack 04 or later (Part Number B32076-03)

5.2 ML4 or higher, 5.3 ML2 or higher, 6.1
For AIX 6.1, only 10.2.0.3 or higher are certified

Customers running on 10.2.0.4 or higher and using CRS require AIX 5.3 TL5 (5300-05) or higher -- see Note:739371.1

5.2 ML1 or higher, 5.3

o 4.3.3 (64bit only)

o 5.1, 5.2, 5.3 (5L)(64bit only)

4.3.3 (64bit)

o 4.3.2, 4.3.3 (32bit)

o 5.1, 5.2 (5L) (32bit) [patch 2896876 is required if kernel is running in 64bit mode]

o 4.3.2, 4.3.3 (64bit)

4.3.2, 4.3.3 (32 or 64bit)

o 4.2.1 , 4.3.0, 4.3.1, 4.3.2, 4.3.3 (32bit)

o 4.3.2, 4.3.3 (64bit)

o 4.2.1, 4.3.2, 4.3.3 (32bit)

o 4.3.2, 4.3.3 (64bit)

o 4.1.4, 4.1.5, 4.2.1, 4.3.2, 4.3.3 (32bit)

o 4.3.2, 4.3.3 (64bit)

AIX Disk Space

6.40G Database

1.55G Software

6.45G Database

1.6G Software

1.2G Database

3G Software

1G Companion

150M-1.9G Client

4.5G

4.7G

1.58G

800Mb

700Mb

AIX RAM

Database: minimum 1GB, recommended 2GB
Grid Infrastructure for standalone server: minimum 1.5GB (plus another 1GB if installing Database too), recommended 4GB

1GB

512Mb

256Mb(Client/Compan)

512Mb

256Mb

128Mb

64Mb or

128Mb / ConText

32Mb or

128Mb / ConText

AIX swap

Between 1GB and 2GB then 1.5 times RAM

Between 2GB and 16 GB then match RAM

More than 16 GB then 16GB RAM

If RAM = 1024MB to 2048Mb

then 1.5 times RAM

elseif RAM > 2048MB and < 8192MB

then match RAM

else RAM > 8192MB

then .75 times RAM

1Gb or match RAM

512Mb(Client/Compan)

1Gb or match RAM

400Mb

256Mb

2*RAM

AIX tmp

1GB

240Mb

400Mb

50Mb

20Mb

AIX JDK & JRE

IBM JDK 1.6.0.00 (64 BIT)

IBM JDK 1.5.0.06 (IA64 - mixed mode) is installed

IBM JDK 1.4.2 (32bit) is installed

IBM JDK 1.4.1.2 (32bit) is installed

JDK 1.3.1-build 20020316 & 1.1.8-Build 20020313

JDK 1.2.2.04 or JDK 1.2.2 & 1.1.8

JDK 1.1.8 / 1.2.2 & 1.1.8.3

1.1.8.3

n/a

AIX Patches/

Packages
versions in parens mean if OS is later than the listed version, the APAR is built into the later OS version and need not be applied. IMPORTANT: Review Note 390656.1 &
apply AIX & Oracle Patch

AIX 5.3 required packages:

bos.adt.base

bos.adt.lib

bos.adt.libm

bos.perf.libperfstat 5.3.9.0 or later

bos.perf.perfstat

bos.perf.proctools

rsct.basic.rte (For RAC configurations only)

rsct.compat.clients.rte (For RAC configurations only)

xlC.aix50.rte:10.1.0.0 or later

gpfs.base 3.2.1.8 or later (Only for RAC systems that will use GPFS cluster filesystems)
AIX 6.1 required packages:

bos.adt.base

bos.adt.lib

bos.adt.libm

bos.perf.libperfstat 6.1.2.1 or later

bos.perf.perfstat

bos.perf.proctools

rsct.basic.rte (For RAC configurations only)

rsct.compat.clients.rte (For RAC configurations only)

xlC.aix61.rte:10.1.0.0 or later

gpfs.base 3.2.1.8 or later (Only for RAC systems that will use GPFS cluster filesystems)

AIX 7.1 required packages:

bos.adt.base

bos.adt.lib

bos.adt.libm

bos.perf.libperfstat

bos.perf.perfstat

bos.perf.proctools

xlC.aix61.rte.10.1.0.0 or later

xlC.rte.10.1.0.0 or later

gpfs.base 3.3.0.11 or later (Only for RAC systems that will use GPFS cluster filesystems)

Authorized Problem Analysis Reports (APARs) for AIX 5.3:

IZ42940

IZ49516

IZ52331

See Note:1379753.1 for other AIX 5.3 patches that may be required

APARs for AIX 6.1:

IZ41855

IZ51456

IZ52319

IZ97457

IZ89165

See Note:1264074.1 andNote:1379753.1 for other AIX 6.1 patches
that may be required

APARs for AIX 7.1:

IZ87216

IZ87564

IZ89165

IZ97035

See Note:1264074.1 andNote:1379753.1 for other AIX 7.1 patches
that may be required

Refer to the 11.2 AIX Install Guide.Part Number E24332-01

6.1 / 5.3 ML5 required packages:

bos.adt.base

bos.adt.lib

bos.adt.libm

bos.perf.libperfstat

bos.perf.perfstat

bos.perf.proctools

xlC.aix50.rte:8.0.0.7 or later (AIX 5.3)

xlC.rte:8.0.0.7 or later (AIX 5.3)

xlC.aix61.rte:9.0.0.1 or later (AIX 6.1)

xlC.rte:9.0.0.1 or later (AIX 6.1)

rsct.basic.rte (For RAC configurations only)

rsct.compat.clients.rte (For RAC configurations only)
5.3 ML5 required patches:

IY89080

IY92037

IY94343

IZ01060 or efix for IZ01060

IZ03260 or efix for IZ03260 (IZ03260 for ML6, IZ03475 for ML7) to address ORA-27061

IY84780

IY68989

POWER7 Based Hardware

Patch 9216848 (Note 1065579.1)

5.2 ML4 required patches:

IY63133

IY64978

IY63366

IY64691

IY64737

IY65001

IY94343 Note 422031.1 LV Block Corruption
5.3 ML2 required patches:

IY58143

IY59386

IY60930

IY66513

IY70159

IY68989

IY94343 Note 422031.1 LV Block Corruption

Patch 5496862 is required (See Note 390656.1) if running on AIX 5.3 ML5

IY84780

IY68989

Important: Please see Note 282036.1 for the latest patching requirements for 5.3 and 5.2

Required OS packages:

bos.adt.base

bos.adt.lib

bos.adt.libm

bos.perf.perfstat

bos.perf.libperfstat

bos.perf.proctools

6.1 specifics:

Please download and run an updated version of rootpre.script before proceeding with the Oracle Database install. Internal bug 6613550. 6718715can be downloaded from My Oracle Support
(MOS).

Refer to Note 282036.1 for updates on any required patches for AIX 6.1

Excessive Paging on IBM AIX POWER Systems Refer Note 1503072.1

5.2 required patches:

IY43980

IY44810

IY45462

IY45707

IY46214

IY46605

IY48525

IY51801

IY59082 Refer to Note 285158.1

IY94343 Note 422031.1 LV Block Corruption
5.3 required patches: Refer to Note 282036.1

IY58143

IY59386

IY60930

IY94343 Note 422031.1 LV Block Corruption

Patch 5496862 is required (See Note 390656.1) if running on AIX 5.3 ML5.

IY84780

IY68989

Important: Please see Note 282036.1 for the latest patching requirements for 5.3 and 5.2

Required OS packages:

bos.adt.base

bos.adt.lib

bos.adt.libm

bos.perf.perfstat

bos.perf.libperfstat

bos.perf.proctools

X11.motif.lib (Spatial only)

Async IO Hang, refer to Note 233659.1 for applicable patch for 4.3.3, 5.1, or 5.2
4.3.3 required patches/packages:

IY30927(4.3.3.0.10)

IY24568(4.3.3.0.09)

IY25282(4.3.3.0.09)

IY27614(4.3.3.0.09)

IY30151(4.3.3.0.10)

Maint Level 9 or higher (4.3.3.0.09)

bos.adt.base

bos.adt.lib

bos.adt.libm

bos.perf.perfstat

5.1(5L) required patches/packages:

IY26778(5100-01)

IY28766(5100-01)

IY28949(5100-01)

IY29965(5100-02)

IY30150(5100-02)

IY59082 refer to Note 285158.1

Maint Level 1 and IY22854

bos.adt.base

bos.adt.lib

bos.adt.libm

bos.perf.perfstat

bos.perf.libperfstat

Use the -ignoreSysPrereqs option with runInstaller to ignore the system pre-requisite test (Note 293750.1)

Maint Level 7 or higher (4.3.3.0.07)

bos.adt.base

bos.adt.lib

bos.adt.libm

bos.perf.perfstat

X11.apps.rte

X11.apps.xterm

X11.base.rte

X11.motif.lib

X11.motif.mwm

IY01050 (4.3.3.0.03)

IY07276 (4.3.3.0.02)

IY05995 (4.3.3.01)

IY02407 (4.3.2.02)

IX89087 (4.3.2.0.02)

IY03412 (4.3.2.0.02)

IX85104 (4.3.2.0.01)

IX87313 (4.3.2.0.01)

IX87382 (4.3.2.0.01)

IX89552 (4.3.2.0.01)

IX81863 (4.3.1)

IX72696 (4.3.0)

IY01050 (4.3.3.0.03)

IY07276 (4.3.3.0.02)

IY05995 (4.3.3.01)

IY07018 (4.3.3)

IY02407 (4.3.2.02)

IX89087 (4.3.2.0.02)

IY03412 (4.3.2.0.02)

IX85104 (4.3.2.0.01)

IX87313 (4.3.2.0.01)

IX87382 (4.3.2.0.01)

IX89552 (4.3.2.0.01)

IX81863 (4.3.1)

IX72696 (4.3.0)

4.2 related required APARs

IX62429 (4.2.0)

IX67174 (4.2.0)

IX67978 (4.2.1)

IX68932 (4.2.1)

IX70737 (4.2.1)

IX78933 (4.2.1.0.03)

IX81957 (4.2.1.0.03)

IX86229 (4.2.1.0.05)
4.3 related required APARs

IX71948 (4.3.0)

IX79690 (4.3.0)

IX81863 (4.3.1)

bos.adt.base, bos.adt.libm

must be installed
4.2 related required APARs

IX62429 (4.2.0)

IX67174 (4.2.0)

IX67978 (4.2.1)

IX68932 (4.2.1)

IX70737 (4.2.1)

IX78933 (4.2.1.0.03)

IX81957 (4.2.1.0.03)

IX86229 (4.2.1.0.05)

IX88178 (4.2.1.0.06)

4.3 related required APARs

IX71948 (4.3.0)

IX79690 (4.3.0)

IX81863 (4.3.1)

IX87313 (4.3.2.0.01)

IX87382 (4.3.2.0.01)

IX89087 (4.3.2.0.02)

bos.adt.base, bos.adt.libm

must be installed
4.1 related required APARs

IX54124 (4.1.4)

IX55203 (4.1.5.0.01)

IX62330 (4.1.5)

IX58455 (4.1.4)

IX61237 (4.1.4)

IX67074 (4.1.5)

IX61933 (4.1.5)

IX70194 (4.1.5)

4.2 related required APARs

IX62429 (4.2.0)

IX67174 (4.2.0)

IX67978 (4.2.1)

IX68932 (4.2.1)

IX70737 (4.2.1)

If running 4.2 then need bos.rte.libc version 4.2.0.5

4.3 related required APARs

IX71948 (4.3.0)

AIX Kernel Settings

set AIXTHREAD_SCOPE=S in the environment:

export AIXTHREAD_SCOPE=S
NOTE: This is only necessary on AIX5L. A change was introduced in AIX 6.1 which means that the variable does not need to be set. See section 5.5 (page 217) of theIBM
AIX Version 6.1 Differences Guide

From Section 2.5 of the 11.2 Install Guide for AIX:

2.5 Verifying UDP and TCP Kernel Parameters

Use NDD to ensure that the kernel TCP/IP ephemeral port range is broad enough to provide enough ephemeral ports for the anticipated server workload. Ensure that the lower range is set to at least 9000 or higher, to avoid Well Known ports, and to avoid ports
in the Registered Ports range commonly used by Oracle and other server ports. Set the port range high enough to avoid reserved ports for any applications you may intend to use. If the lower value of the range you have is greater than 9000, and the range is
large enough for your anticipated workload, then you can ignore OUI warnings regarding the ephemeral port range.

Use the following command to check your current range for ephemeral ports:

# /usr/sbin/no -a | fgrep ephemeral

tcp_ephemeral_low = 32768

tcp_ephemeral_high = 65535

udp_ephemeral_low = 32768

udp_ephemeral_high = 65535

In the preceding example, the TCP and UDP ephemeral ports are set to the default range (32768-65536).

If you expect your workload to require a high number of ephemeral ports, such as high node counts or heavy use of Parallel Query, then update the UDP and TCP ephemeral port range to a broader range. For example:

# /usr/sbin/no -p -o tcp_ephemeral_low=9000 -o tcp_ephemeral_high=65500

# /usr/sbin/no -p -o udp_ephemeral_low=9000 -o udp_ephemeral_high=65500

From Section 2.8.2 of the 11.2 Install Guide for AIX:

2.8.2 Configure System Configuration Parameters

Parameter Recommended Value

maxuprocs 16384

ncargs 128

Also see Note:1307804.1

set AIXTHREAD_SCOPE=S in the environment:

export AIXTHREAD_SCOPE=S

N/A

LINK_CNTRL = L_PTHREADS_D7 (if using 4.3)

Oracle Version

11.2

11.1

10.2

10.1

9.2.0

9.0.1

8.1.7

8.1.6

8.1.5

8.0.6

8.0.5

HP OS

(32- and 64-bit stands for Oracle not OS)

HP-UX 11i V3 patch Bundle Sep/ 2008 (B.11.31.0809.326a) or higher (Part Number E10851-01)

11.23 and 11.31 (Itanium,PA-RISC)

11.11 (PA-RISC) (64bit)

11.23 (PA-RISC) (64bit)

11.23, 11.31 (PA-RISC / Itanium / IPF)

11.11 (PA-RISC) (64bit)

11.23 (PA-RISC) (64bit)

11.23, 11.31 (IA64 - Itanium)

Note: for all Itanium systems using "Montecito" processors, refer tonote:400227.1 for special installation instructions

11.0 (64bit)

11.11 (64bit)

11.23 (PA-RISC) (64bit)

11.31 (PA-RISC) (64bit)(10/30)

11.22, 11.23, 11.31 (IA64 - Itanium)

Note: for all Itanium systems using "Montecito" processors, refer tonote:400227.1 for special installation instructions

11.0 (64bit)

11.11 (64bit)

11.0, 11.11(11i) (32bit/64bit)

10.20 (32bit)

11.0, 11.11(11i) (32bit/64bit)

10.20 (32bit)

11.0 (32 or 64)

HP Disk Space

1.7G database

6.9 G Software

1.7G Database

6.9G Software

1.2G Database

2.5G Software

1G Companion

150M-1.5G Client

4.5G

3.5G

1.5G

910Mb

900Mb

HP RAM

Database: minimum 1GB, recommended 2GB
Grid Infrastructure for standalone server: minimum 1.5GB (plus another 1GB if installing Database too), recommended 4GB

1GB

512Mb

256Mb(Client/Compan)

512Mb

256Mb

128Mb

64Mb or

128Mb /

ConText

32Mb or

128Mb /

ConText

HP swap

Between 4 GB and 8 GB then 2 times RAM.

Between 8 GB and 32 GB then 1.5 times RAM.

More than 32 GB then 32 GB RAM.

If RAM = 1GB to 2GB

then 1.5 times RAM

elseif RAM > 2GB and < 8GB

then match RAM

else RAM > 8GB

then .75 times RAM

If RAM = 1024MB to 2048Mb

then 1.5 times RAM

elseif RAM > 2048MB and < 8192MB

then match RAM

else RAM > 8192MB

then .75 times RAM

1Gb or match RAM

512Mb(Client/Compan)

1Gb or match RAM

2*RAM

3*RAM

HP tmp

1GB

400Mb

75Mb

50Mb

HP jdk & JRE

HPUX JDK 6.0.05, HPUX JDK 5.0.15
NOTE: The JDK version included with 11.2.0.3 on HP-UX Itanium (1.5.0.23) is not compatible with Itanium 2 model 9310 processors. Please refer to the statement at the end of bothNote:404843.1 and Note:552358.1.
To workaround the issue, download JDK 1.5.0.24 or higher and use the "./runInstaller -jreLoc ..." syntax to start the 11.2.0.3 installation.

Java 1.5.0.0.6 is installed

Java SDK 1.4.2.00 is installed

JDK 1.3.1.02

JDK 1.2.2.07 & 1.1.8

JDK 1.2.2 & 1.1.8.03

1.1.8.10

1.1.7

n/a

HP Patches/

Packages

"s/b" indicates superseded by
See Note 43507.1for other applicable patches.

For HP-UX 11i V3 (11.31):

PHCO_40381 11.31 Disk Owner Patch

PHCO_41479 11.31 (fixes an 11.2.0.2 ASM disk discovery issue)

PHKL_38038 VM patch - hot patching/Core file creation directory

PHKL_38938 11.31 SCSI cumulative I/O patch

PHKL_39351 Scheduler patch : post wait hang

PHSS_36354 11.31 assembler patch

PHSS_37042 11.31 hppac (packed decimal)

PHSS_37959 Libcl patch for alternate stack issue fix (QXCR1000818011)

PHSS_39094 11.31 linker + fdp cumulative patch

PHSS_39100 11.31 Math Library Cumulative Patch

PHSS_39102 11.31 Integrity Unwind Library

PHSS_38141 11.31 aC++ Runtime

Pro*C/C++, Oracle Call Interface, Oracle C++

Pro*C/C++, Oracle Call Interface, Oracle C++ Call Interface, Oracle XML Developer's Kit (XDK):-

Patch for HP-UX 11i V3 (11.31) on HP-UX Itanium:-

PHSS_39824 - 11.31 HP C/aC++ Compiler (A.06.23) patch

PHKL_40941 - Scheduler patch : post wait hang

For HP-UX PA-RISC and Itanium 11.23 (Mar '07 Patch bundle for HP-UX 11iV2- B.11.23.0703):

PHSS_35979 s/b PHSS_37201 s/b PHSS_37492 s/b PHSS_38134

PHSS_35978 s/b PHSS_36343 s/b PHSS_38140

PHCO_35524 s/b PHCO_36744

PHKL_35478 s/b PHKL_36319

PHCO_36673 s/b PHCO_37228

PHKL_35029 s/b PHKL_37121

PHKL_37809 or later Note 580273.1

For HP-UX PA-RISC and Itanium 11.31:

PHKL_35900

PHKL_36248

PHKL_36249

PHKL_35936 s/b PHKL_36242 s/b PHKL_37185 s/b PHKL_38038

PHKL_38397 or later. Note 580273.1

Use the -ignoreSysPrereqs option with runInstaller to ignore the system pre-requisite test

Refer to the following Web site for information about additional java patches:http://www.hp.com/products1/unix/java/patches/index.htmlThe default 64bit
OS (PA-RISC and Itanium From Bug 8789180) installation does not create a few required X library symbolic links. The following symbolic links need to be created:

(NOTE: This task is required only if the Motif 2.1 Development Environment Package ( X11MotifDevKit.MOTIF21-PRG ) is not installed ).

cd /usr/lib

ln -s /usr/lib/libX11.3 libX11.sl

ln -s /usr/lib/libXIE.2 libXIE.sl

ln -s /usr/lib/libXext.3 libXext.sl

ln -s /usr/lib/libXhp11.3 libXhp11.sl

ln -s /usr/lib/libXi.3 libXi.sl

ln -s /usr/lib/libXm.4 libXm.sl

ln -s /usr/lib/libXp.2 libXp.sl

ln -s /usr/lib/libXt.3 libXt.sl

ln -s /usr/lib/libXtst.2 libXtst.sl

Per HP Bug (Doc ID: KBRC00003627)

NOTE: This bug is not applicable to 11.23 The default 64bit OS (PA-RISC and Itanium) installation does not create a few required X library symbolic links. The following symbolic links need to be created:

(NOTE: This task is required only if the Motif 2.1 Development Environment Package ( X11MotifDevKit.MOTIF21-PRG ) is not installed ).

cd /usr/lib

ln -s /usr/lib/libX11.3 libX11.sl

ln -s /usr/lib/libXIE.2 libXIE.sl

ln -s /usr/lib/libXext.3 libXext.sl

ln -s /usr/lib/libXhp11.3 libXhp11.sl

ln -s /usr/lib/libXi.3 libXi.sl

ln -s /usr/lib/libXm.4 libXm.sl

ln -s /usr/lib/libXp.2 libXp.sl

ln -s /usr/lib/libXt.3 libXt.sl

ln -s /usr/lib/libXtst.2 libXtst.sl
GOLDQPK11i, December 2004 or later

If GOLDQPK is not installed then these two patchkits need to be installed:

GOLDAPPS11i, December 2004 or later

GOLDBASE11i, December 2004 or later

11.11 required patches:

o PHNE_31097 s/b PHNE_32477 s/b PHNE_33498 s/b PHNE_35418 s/b PHNE_36168 s/b PHNE_37110

o PHSS_31221 s/b PHSS_33263 s/b PHSS_33944 s/b PHSS_33945

For JDK, refer to HP Java for latest patches:

o PHSS_30970 s/b PHSS_33033 s/b PHSS_35379 s/b PHSS_35385

For PL/SQL/ProC,OCI,OCCI,XDK:

o PHSS_32508 s/b PHSS_34411 s/b PHSS_35099 s/b PHSS_36087

o PHSS_32509 s/b PHSS_34412 s/b PHSS_35098 s/b PHSS_36086

o PHSS_32510 s/b PHSS_34413 s/b PHSS_35100 s/b PHSS_36088

11.23 (PA-RISC) required patches:

o PHSS_31849 s/b PHSS_37021 s/b PHSS_37492 s/b PHSS_40537

o PHSS_31852 s/b PHSS_35055 s/b PHSS_36343s/b PHSS_38140

For PL/SQL/ProC,OCI,OCCI,XDK:

o PHSS_32511

o PHSS_32512

o PHSS_32513

o PHKL_37809 or later Note 580273.1

Ensure that unzip version is 5.5 or higher ($ unzip -v) [reference Note 263692.1], if not it can be downloadedhere

11.31 (PA-RISC) required patches:

o PHKL_35900: 11.31 evacd performance, kvaddr leak panic

o PHKL_36248: 11.31 esctl cumulative patch

o PHKL_36249: 11.31 esdisk cumulative patch

o PHKL_38397 or later Note 580273.1

o PHKL_35936 s/b PHKL_36242 s/b PHKL_37185 s/b PHKL_38038: 11.31 call to read(2) or write(2) may incorrectly return -1

o You can use HP JDK 5.0.07 with the Oracle Java Database Connectivity and Oracle Call Interface drivers. Ensure that you install the patch PHKL_35029 s/b PHKL_37121 to use JDK 5.0.07.

11.23 (Itanium) required patches:

The following operating system patches:

o BUNDLE11i B.11.23.0409.3: Patch Bundle for HP-UX 11i V2

Note: You must have the August 2004 version of BUNDLE11i B.11.23.0408.1 for HP-UX 11i v2 on your system prior to updating to the HP-UX 11i v2 September 2004 or later release.

o PHCO_32426

o PHKL_32646 s/b PHKL_36103

o PHKL_32632 s/b PHKL_33656 s/b PHKL_33807 s/b PHKL_38364

o PHKL_32645 s/b PHKL_34477 s/b PHKL_37106

o PHKL_33552 s/b PHKL_33563 s/b PHKL_36667 s/b PHKL_37653 s/b PHKL_41002

o PHSS_31850 s/b PHSS_34040 s/b PHSS_37201 s/b PHSS_37492 s/b PHSS_38134 s/b PHSS_40537

o PHSS_31851 s/b PHSS_34043 s/b PHSS_34859 s/b PHSS_37498 s/b PHSS_38138 or PHSS_39101 s/b PHSS_40541

o PHSS_31854 s/b PHSS_33357 s/b PHSS_34045 s/b PHSS_34445 s/b PHSS_40547

o PHSS_31855 s/b PHSS_33350 s/b PHSS_34041 s/b PHSS_35055 s/b PHSS_36343 s/b PHSS_38140 s/b PHSS_40543

o PHSS_33275 s/b PHSS_33349 s/b PHSS_34040 s/b PHSS_37201 s/b PHSS_37492 s/b PHSS_38134 s/b PHSS_40537

o PHSS_33276 s/b PHSS_34042 s/b PHSS_34853 s/b PHSS_36344 s/b PHSS_40539

o PHKL_37809 or later Note 580273.1

For PL/SQL native compilation and installation of Pro*C/C++, Oracle Call Interface, Oracle C++ Call Interface, or Oracle XML Developer's Kit (XDK) , the following patches are required:

o PHSS_33278

o PHSS_33277

The following JDK patches:

o PHCO_31553 s/b PHCO_33675 s/b PHCO_36323 s/b PHCO_37940 s/b PHCO_39699

o PHKL_31500

o PHSS_32213 s/b PHSS_32502 s/b PHSS_34201 s/b PHSS_37492 s/b PHSS_40537

Note: Refer to the following Web site for information about additional patches that may be required by JDK 1.4.2:

HP Java Patches

11.31 (Itanium) required patches:

The following operating system patches:

o PHKL_35936 s/b PHKL_36242 s/b PHKL_37185 s/b PHKL_38449 s/b PHKL_38038

o PHKL_38397 or later Note 580273.1

The following patches are supported on Oracle Database 10g release 2:(Part Number B25292-06)

PHKL_35900: 11.31 evacd performance, kvaddr leak panic

PHKL_36248: 11.31 esctl cumulative patch

PHKL_36249: 11.31 esdisk cumulative patch

PHKL_35936: 11.31 call to read(2) or write(2) may incorrectly return -1

Use the -ignoreSysPrereqs option with runInstaller to ignore the system pre-requisite test

Per HP Bug (Doc ID: KBRC00003627)

NOTE: This bug is not applicable to 11.23 The default 64bit OS installation does not create a few required X library symbolic links. The following symbolic links need to be created:

(NOTE: This task is required only if the Motif 2.1 Development Environment Package ( X11MotifDevKit.MOTIF21-PRG ) is not installed ).

cd /usr/lib

ln -s /usr/lib/libX11.3 libX11.sl

ln -s /usr/lib/libXIE.2 libXIE.sl

ln -s /usr/lib/libXext.3 libXext.sl

ln -s /usr/lib/libXhp11.3 libXhp11.sl

ln -s /usr/lib/libXi.3 libXi.sl

ln -s /usr/lib/libXm.4 libXm.sl

ln -s /usr/lib/libXp.2 libXp.sl

ln -s /usr/lib/libXt.3 libXt.sl

ln -s /usr/lib/libXtst.2 libXtst.sl
GOLDQPK11i, June 2003 or later

If GOLDQPK is not installed then these two patchkits need to be installed:

GOLDAPPS11i, June 2003 or later

GOLDBASE11i, June 2003 or later

Jun03GQPK11i_Aux_Patch (Does not exist, see Bug 3512068)

X11MotifDevKit (spatial only)

o PHCO_28123 s/b PHCO_31314 s/b PHCO_32397

o PHKL_29198 s/b PHKL_32603

o PHNE_28476 s/b PHNE_29825 s/b PHNE_30367 s/b PHNE_31091 s/b PHNE_33729

o PHNE_28923 s/b PHSS_30049 s/b PHNE_32396 s/b PHNE_33704

o PHSS_28871 s/b PHSS_33033

o PHSS_28880 s/b PHSS_32573 s/b PHSS_33263

o PHCO_26331 s/b PHCO_27958 s/b PHCO_33205

o PHCO_29109 s/b PHCO_29960 s/b PHCO_30544

o PHKL_25468 s/b PHKL_30542

o PHKL_25842 s/b PHKL_30288 s/b PHKL_34311

o PHKL_25993

o PHKL_25994 s/b PHKL_32061 s/b PHKL_34309

o PHKL_25995 s/b PHKL_30541 s/b PHKL_32457 s/b PHKL_34024

o PHKL_26468 s/b PHKL_27316 s/b PHKL_30837

o PHKL_28489

HP-UX 11.23 (IA64) Operating System Patches:

o PHSS_29658 s/b PHSS_30015 s/b PHSS_30237

o PHSS_29660

Java SDK 1.4.2 latest patches

Ensure that unzip version is 5.5 or higher ($ unzip -v) [reference Note 263692.1], if not it can be downloadedhere

11.31 (Itanium) required patches:

The following operating system patches:

PHKL_35936 s/b PHKL_36242 s/b PHKL_37185 s/b PHKL_38038

Use the -ignoreSysPrereqs option with runInstaller to ignore the system pre-requisite test

Per HP Bug (Doc ID: KBRC00003627)

NOTE: This bug is not applicable to 11.22,11.23 The default 64bit OS installation does not create a few required X library symbolic links. The following symbolic links need to be created:

cd /usr/lib

ln -s /usr/lib/libX11.3 libX11.sl

ln -s /usr/lib/libXIE.2 libXIE.sl

ln -s /usr/lib/libXext.3 libXext.sl

ln -s /usr/lib/libXhp11.3 libXhp11.sl

ln -s /usr/lib/libXi.3 libXi.sl

ln -s /usr/lib/libXm.4 libXm.sl

ln -s /usr/lib/libXp.2 libXp.sl

ln -s /usr/lib/libXt.3 libXt.sl

ln -s /usr/lib/libXtst.2 libXtst.sl
HP-UX 11.0(64 bit) Operating System Patches:

Sept 2001 Quality Pack

o PHCO_23792 s/b PHCO_26960

o PHCO_24148 s/b PHCO_25707 s/b PHCO_27608 s/b PHCO_28425 s/b PHCO_32448

o PHKL_24268 s/b PHKL_27178 (has been recalled by HP may destroy logical volumes on PVGs - more info s/b PHKL_32920

o PHKL_24729 s/b PHKL_29256

o PHKL_25475 s/b PHKL_27510 s/b PHKL_30553

o PHKL_25525 s/b PHKL_27364 s/b PHKL_28766 s/b PHKL_31867

o PHNE_24715 s/b PHNE_26771 s/b PHNE_29473 s/b PHNE_32041 s/b PHNE_33395

o PHSS_23670 s/b PHSS_26138 s/b PHSS_27858

o PHSS_24301 s/b PHSS_26273 s/b PHSS_28433 (only needed for C++ compiler and Pro*C++)

o PHSS_24303 s/b PHSS_26559 s/b PHSS_30965

o PHSS_24627 s/b PHSS_26945 s/b PHSS_32574

o PHSS_22868 (only needed for C++ compiler and Pro*C++)

Ensure that unzip version is 5.5 or higher ($ unzip -v) [reference Note 263692.1], if not it can be downloaded here

HP-UX 11i (64 Bit) Operating System Patches:

Support Plus Bundle 'December 2002 SP-0212' or later

JDK 1.3.1.02

o PHCO_24402 s/b PHCO_25569 s/b PHCO_31923

o PHCO_28427 s/b PHCO_29029 s/b PHCO_31903 s/b PHCO_33533

o PHKL_25506 s/b PHKL_33457

o PHNE_27144 s/b PHNE_27745 s/b PHNE_30580 (For RAC systems)

o PHNE_28568 s/b PHNE_30378 s/b PHNE_32477 s/b PHNE_33315

o PHSS_26263 s/b PHSS_26560 s/b PHSS_33033

o PHSS_24638 s/b PHSS_26946 s/b PHSS_30966 s/b PHSS_33263

o PHSS_26774 s/b PHSS_28849 s/b PHSS_30742 (For ServiceGuard 11.13 systems)

HP-UX 11.22 /11.23 (IA64) Operating System Patches:

o PHSS_27284 s/b PHSS_28977

o PHSS_27285 s/b PHSS_28970

o PHSS_27286 s/b PHSS_28978

o PHSS_27287 s/b PHSS_29652

o PHSS_27288 s/b PHSS_28971

o PHSS_27289 s/b PHSS_29653

o PHSS_27290 s/b PHSS_28973

o PHSS_27291 s/b PHSS_28969

o PHSS_27292 s/b PHSS_29654

o PHSS_27293 s/b PHSS_28975

o PHKL_28465

11.31 (Itanium) required patches:

The following operating system patches:

PHKL_35936 s/b PHKL_36242 s/b PHKL_37185 s/b PHKL_38038

Use the -ignoreSysPrereqs option with runInstaller to ignore the system pre-requisite test

HP-UX 11.0(64 bit) Operating System Patches:

Dec 2000 patch bundle

o PHCO_23092 s/b PHCO_23963 s/b PHCO_26111

o PHCO_23770 s/b PHCO_25707 s/b PHCO_27608

o PHCO_23919 s/b PHCO_27340

o PHKL_18543

o PHKL_23226 s/b PHKL_27510 s/b PHKL_30553

o PHKL_23813 s/b PHKL_25525 s/b PHKL_27364 s/b PHKL_31867

o PHKL_23814 s/b PHKL_24729 s/b PHKL_29256

o PHKL_23815 s/b PHKL_26337 s/b PHKL_27553

o PHKL_23857 s/b PHKL_25525 s/b PHKL_27364 s/b PHKL_31867
HP-UX 11i (64 bit) Operating System Patches Status

o PHCO_23094 s/b PHCO_24402

o PHCO_23772 s/b PHCO_26124 s/b PHCO_27910

o PHSS_23441 s/b PHSS_26263

o PHNE_23502 s/b PHNE_25625 s/b PHNE_26388 s/b PHNE_28568

11.0 patches:

o PHSS_21947 s/b PHSS_24303 s/b PHSS_26559

o PHNE_20316 s/b PHNE_22566 s/b PHNE_25440

o PHKL_21392 s/b PHKL_24027

o PHKL_22145 s/b PHKL_25475 s/b PHKL_27510 s/b PHKL_30553

o PHKL_22266 s/b PHKL_27178
DART 49, 6/00

Patch Bundle9905

o PHCO_17556 s/b PHCO_23651

o PHCO_17792 s/b PHCO_21187 s/b PHCO_25902

o PHCO_18229 s/b PHCO_23963 s/b PHCO_26111

o PHCO_19491 s/b PHCO_25707 s/b PHCO_27608

o PHCO_19666 s/b PHCO_23792 s/b PHSS_26960

o PHKL_14750 s/b PHKL_25475 s/b PHKL_27510 s/b PHKL_30553

o PHKL_17038 s/b PHKL_25525 s/b PHKL_27364 s/b PHKL_31867

o PHKL_18543

o PHKL_19800 s/b PHKL_24027

o PHKL_20016

o PHKL_20079 s/b PHKL_24027

o PHNE_19616 s/b PHNE_24100 s/b PHNE_25385

o PHSS_14582 s/b PHSS_26320

o PHSS_15853 s/b PHSS_23546 s/b PHSS_26566

o PHSS_16849 s/b PHSS_25718 s/b PHSS_27469

o PHSS_17535 s/b PHSS_25091

o PHSS_18066

o PHSS_18110 s/b PHSS_26273 s/b PHSS_28433

o PHSS_18430 s/b PHSS_25199 s/b PHSS_26495

o PHSS_18649 s/b PHSS_26320

o PHSS_19593 s/b PHSS_25447 s/b PHSS_27230

o PHSS_19178 s/b PHSS_25249

o PHSS_19748 s/b PHSS_25149 s/b PHSS_26490

o PHSS_19866 s/b PHSS_24303 s/b PHSS_26559

o PHSS_20544 s/b PHSS_26138 s/b PHSS_27858

o PHSS_20014 s/b PHSS_24303 s/b PHSS_26559

o PHSS_21180

PHKL_14750 s/b PHKL_25475 s/b PHKL_27510 s/b PHKL_30553

o PHKL_17709 s/b PHKL_23792 s/b PHKL_26960

o PHKL_17869 s/b PHKL_18543

o PHNE_17446 s/b PHNE_21767 s/b PHNE_26771 s/b PHNE_29473

32/64bit 11.0

o PHNE_15995 s/b PHNE_21767 s/b PHNE_26771 s/b PHNE_29473

o PHNE_16283 s/b PHNE_21767 s/b PHNE_26771 s/b PHNE_29473
64bit 11.0

o PHSS_15316 s/b PHSS_24303 s/b PHSS_26559

o PHSS_16404 s/b PHSS_24303 s/b PHSS_26559

HP Kernel Settings

Refer to the 11GR2 HP-UX Install Guide for steps to do this. Section 2.8 Configuring Kernel Parameters on HP-UX Systems.Part Number
E24336-02.

Important: For HP 9000/700 workstations Only, see Note 467166.1:

set the following before starting the OUI,DBCA, or DBUA:

$ export JAVA64FLAG="-d64"
KSI_ALLOC_MAX (NPROC*8)

EXECUTABLE_STACK=0

MAX_THREAD_PROC 1024

MAXDSIZ 1073741824

MAXDSIZ_64BIT 2147483648

MAXFILES 65536 Note:1061351.1

MAXFILES_LIM 65536 Note:1061351.1

MAXTSIZE_64BIT 1073741824

MAXSSIZ 134217728 bytes

MAXSSIZ_64BIT 1073741824

MAXUPRC ((NPROC*9)/10)+1 Bug 6995956

MSGMAP (MSGTQL+2) *

MSGMNI (NPROC)

MSGSEG 32767 *

MSGTQL (NPROC)

NCSIZE (NINODE+1024)

NFILE (15*NPROC+2048) *

NFLOCKS (NPROC)

NINODE (8*NPROC+2048)

NKTHREAD (((NPROC*7)/4)+16)

NPROC 4096

SEMMNI (NPROC)

SEMMNS (SEMMNI*2)

SEMMNU (NPROC - 4)

SEMVMX 32767

SHMMAX AvailMem

SHMMNI 4096

SHMSEG 512

VPS_CEILING 64

* MSGMAP,MAXSWAPCHUNKS, NCALLOUT, SEMMAP,VX_NCSIZE,NFILE, MSGSEG are obsolete on 11.31 (Itanium and PA-RISC) and no longer required to be set.

KSI_ALLOC_MAX (NPROC*8)

EXECUTABLE_STACK=0

MAX_THREAD_PROC 1024

MAXDSIZ 1073741824 bytes

MAXDSIZ_64BIT 2147483648 bytes

MAXFILES 65536 Note:1061351.1

MAXFILES_LIM 65536 Note:1061351.1

MAXSSIZ 134217728 bytes

MAXSSIZ_64BIT 1073741824

MAXSWAPCHUNKS 16384*

MAXUPRC ((NPROC*9)/10)+1 Bug 6995956

MSGMAP (MSGTQL+2)

MSGMNI (NPROC)

MSGSEG 32767

MSGTQL (NPROC) (B25293-01)

NCSIZE (NINODE+1024)*

NFILE (15*NPROC+2048)

NFLOCKS (NPROC) (B25293-01)

NINODE (8*NPROC+2048)

NKTHREAD (((NPROC*7)/4)+16)

NPROC 4096

SEMMAP (SEMMNI+2)*

SEMMNI (NPROC) (B25293-01)

SEMMNS (SEMMNI*2)

SEMMNU (NPROC - 4)

SEMVMX 32767

SHMMAX AvailMem

SHMMNI 512

SHMSEG 120

VPS_CEILING 64
* MAXSWAPCHUNKS, SEMMAP, and VX_NCSIZE are obsolete on 11.23 PA-RISC and IPF and no longer need to be set

Set NCSIZE = (NINODE+1024)

11.31 (Itanium and PA-RISC):

The following 11.31 kernel parameters are obsolete:

maxswapchunks, msgmap, ncallout, semmap, and vx_ncsize,Nfile,Msgseg

KSI_ALLOC_MAX (NPROC*8)

MAX_THREAD_PROC 256

MAXDSIZ 1073741824 bytes

MAXDSIZ_64BIT 2147483648 bytes

MAXSSIZ 134217728 bytes

MAXSSIZ_64BIT 1073741824

MAXSWAPCHUNKS 16384*

MAXUPRC ((NPROC*9)/10)+1 Bug 6995956

MSGMAP (2+MSGMNI)

MSGMNI (NPROC)

MSGSEG 32767

MSGTQL (NPROC)

NCSIZE (NINODE+VX_NCSIZE)*

NFILE (15*NPROC+2048)

NFLOCKS (NPROC)

NINODE (8*NPROC+2048)

NKTHREAD (((NPROC*7)/4)+16)

NPROC 4096

SEMMAP (SEMMNI+2)*

SEMMNI (NPROC)

SEMMNS (SEMMNI*2)

SEMMNU (NPROC - 4)

SEMVMX 32768

SHMMAX AvailMem

SHMMNI 512

SHMSEG 120

VPS_CEILING 64
* MAXSWAPCHUNKS, SEMMAP, and VX_NCSIZE are obsolete on 11.23 PA-RISC and IPF and no longer need to be set

Set NCSIZE = (NINODE+1024)

11.31 (Itanium and PA-RISC):

The following 11.31 kernel parameters are obsolete:

maxswapchunks, msgmap, ncallout, semmap,vx_ncsize,Nfile and Msgseg

KSI_ALLOC_MAX (NPROC*8)

MAX_THREAD_PROC 256

MAXDSIZ 1073741824 bytes

MAXDSIZ_64BIT 2147483648 bytes

MAXSSIZ 134217728 bytes

MAXSSIZ_64BIT 1073741824

MAXSWAPCHUNKS 16384*

MAXUPRC ((NPROC*9)/10)

MSGMAP (MSGTQL+2)

MSGMNI (NPROC)

MSGSEG 32767

MSGTQL (NPROC)

NCALLOUT (NKTHREAD+16)*

NCSIZE ((8*NPROC+2048)+VX_NCSIZE)*

NFILE (15*NPROC+2048)

NFLOCKS (NPROC)

NINODE (8*NPROC+2048)

NKTHREAD (((NPROC*7)/4)+16)

NPROC 4096

SEMMAP (SEMMNI+2)*

SEMMNI (NPROC)

SEMMNS (SEMMNI*2)

SEMMNU (NPROC - 4)

SEMVMX 32768

SHMMAX AvailMem

SHMMIN 1

SHMMNI 512

SHMSEG 32

VPS_CEILING 64
* MAXSWAPCHUNKS, SEMMAP, NCALLOUT, and VX_NCSIZE are obsolete on 11.23 PA-RISC and IPF and no longer need to be set

Set NCSIZE = (NINODE+1024)

11.31 (Itanium and PA-RISC):

The following 11.31 kernel parameters are obsolete:

maxswapchunks, msgmap, ncallout, semmap,vx_ncsize,Nfile and Msgseg

SHMMAX AvailMem

SHMMIN 1

SHMMNI 512

SHMSEG 32

SEMMNI 8192

SEMMNS 16384
MAXDSIZ

1073741824 bytes

MAXDSIZ_64BIT

2147483648 bytes

MAXSSIZ

134217728 bytes

MAXSSIZ_64BIT

1073741824

SHMMAX 1GB

SHMMIN 1

SHMMNI 100

SHMSEG 10

SEMMNI 70

SEMMNS 200
nflocks = 200 + sum of the values of init.ora parameter db_filesfor all instances of oracle onthe machine.

MAX_THREAD_PROC = 256 or more

maxdsiz

1Gb (1073741824) 0x40000000

maxdsiz_64bit

1.6Gb (1717986918) 66666666

maxssiz

200mb (209715200) C800000

maxssiz_64bit

200mb (209715200) C800000

maxtsiz

1Gb (1073741824) 0x40000000

maxtsiz_64bit

1Gb (1073741824) 0x40000000

SHMMAX 1GB

SHMMIN 1

SHMMNI 100

SHMSEG 10

SEMMNI 70

SEMMNS 200

maxdsiz and maxdsiz_64bit must be >= 128Mb

SHMMAX 1GB

SHMMIN 1

SHMMNI 100

SHMSEG 10

SEMMNI 70

SEMMNS 200
maxdsiz and maxdsiz_64bit must be >= 128Mb

Oracle Version

11.2

11.1

10.2

10.1

9.2.0

9.0.1

8.1.7

8.1.6

8.1.5

8.0.6

8.0.5

Oracle Solaris

(32-bit and 64-bit stands for Oracle DB, not OS)

Solaris(64bit) 10 (update 6 or higher), Solaris 11

NOTE: On Solaris 11, only 11.2.0.3 is certified (not 11.2.0.1 or 11.2.0.2)

Set the following variable before installing 11.2.0.3 on Solaris 11:

export AWT_TOOLKIT=XToolkit

2.9 Update 7 (09/04), 2.10

2.8 Update 7 (02/02), 2.9 Update 6 (04/04), 2.10 (64bit)
Solaris 10 on AMD64/x86_64

Solaris SPARC 2.8, 2.9 (64bit)

o Solaris SPARC 10 (64bit) requires 10.1.0.3.0 patchset

o Solaris x86 2.9, 10

o 2.6, 2.7, 2.8, 2.9 (32bit)

o Solaris 10 (32bit) requires 9.2.0.4.0 patchset

o 2.8, 2.9 (64bit)

o Solaris 10 (64bit) requires 9.2.0.6.0 patchset

o 2.6, 2.7, 2.8, 2.9 (32bit)

o 2.8, 2.9 (64bit)

o 2.6, 2.7, 2.8 (32bit)

o 2.7, 2.8 (64bit)

2.6, 2.7, 2.8 (32bit)

o 2.7 (64bit)

2.5.1, 2.6, 2.7, 2.8

Solaris Disk Space

1.5 to 2G Database

4.7G Software

1.2G Database

1.5G - 3.5G Software

1G Companion

150M-1G Client

1.2G Database

1.5G Software

1G Companion

150M-1G Client

4.5G

3.5G (32bit)

5.7G (64bit)

1355Mb

1170Mb

811Mb

600Mb

Solaris RAM

Database: minimum 1GB, recommended 2GB
Grid Infrastructure for standalone server: minimum 1.5GB (plus another 1GB if installing Database too), recommended 4GB

1GB

512Mb

256Mb(Client/Compan)

512Mb

256Mb (32bit)

512Mb (64bit)

128Mb

64Mb or

128Mb /

ConText

32Mb or

128Mb /

ConText

Solaris swap

If RAM = 1 GB to 2 GB

then 1.5 times RAM

elseif RAM = 2 GB and 16 GB

then match RAM

else RAM > 16 GB

then 16 GB

Note: On Oracle Solaris, if you use non-swappable memory, such as ISM, then you should deduct the memory allocated to this space from the available RAM before calculating swap space. If you plan to install Oracle Database or Oracle RAC on systems using DISM,
then available swap space must be at least equal to the sum of the SGA sizes of all instances running on the servers.

If RAM = 1024MB to 2048Mb

then 1.5 times RAM

elseif RAM > 2048MB and < 8192MB

then match RAM

else RAM > 8192MB

then .75 times RAM

1Gb or match RAM

512Mb(Client/Compan)

1Gb or match RAM

400Mb

2*RAM or

400Mb

2*RAM

3*RAM

Solaris tmp

1GB

275Mb

400Mb

20Mb

Solaris JDK & JRE

JDK 6 Update 10 (Java SE Development Kit 1.6 u10) or JDK 5 (1.5.0_16)

JDK 1.5.0_11 is installed

JDK 1.4.2_01 is installed

JDK 1.4.2_08 is installed (x86_64)

JDK 1.4.2_01 is installed

JDK 1.3.1_02 & 1.1.8_12 (32bit) 1.1.8_15 (64bit)

JDK 1.2.2_07 & 1.1.8_12

JDK 1.2.2. & 1.1.8_10

1.1.8_10

n/a

Solaris Patches/

Packages

Required packages Solaris 10:

SUNWarc

SUNWbtool

SUNWhea

SUNWlibC

SUNWlibm

SUNWlibms

SUNWmfrun

SUNWsprot

SUNWtoo

SUNWi1of

SUNWi1cs (ISO8859-1)

SUNWi15cs (ISO8859-15)

SUNWxwfnt

SUNWcsl

Although it is not listed in the Install Guide, the RAC root.sh script requires /usr/xpg4/bin/tr and so requires the SUNWxcu4 package.

@ See Bug:14046807 for confirmation.

For Solaris 11 all packages are installed by default. Hence no additional packages are required (refer Installation Document). But
it is suggested to make sure above packages are installed or its equivalent are installed. We can search for packages at Oracle Solaris 11 Package repository).
To fix the issue reported in Bug 14046807 install XCU4 Utilities

Note : From Solaris 11, the SUNW prefix for package names is no longer used. With the introduction of IPS, all software packages are renamed. for more information refer to Oracle
Solaris 10 SVR4 and IPS Package Comparison

Information on Solaris 11 Installation types - refer to Note 1557986.1

Important: For non-sun4u or sun4v workstations Only, seeNote 467166.1:

set the following before starting the OUI,DBCA, or DBUA:

$ export JAVA64FLAG="-d64"

Required Packages:

SUNWarc

SUNWbtool

SUNWhea

SUNWi15cs

SUNWi1cs

SUNWi1of

SUNWlibC

SUNWlibm

SUNWlibms

SUNWmfrun

SUNWsprot

SUNWsprox (Not applicable to Solaris 10),

SUNWtoo

SUNWxwfnt

SUNWuiu8 Note 290034.1

SUNWulcf Note 290034.1

Although it is not listed in the Install Guide, the RAC root.sh script requires /usr/xpg4/bin/tr and so requires the SUNWxcu4 package.

@ See Bug:14046807 for confirmation.

Solaris 9 Reqd Patches:

112233-11

111722-04

112874-39

115675-01 (NUMA only)

113471-08 (NUMA only)

115675-01 (NUMA only)

113029-07 for Fair Share Scheduler, See Note 558374.1

Solaris 10 Reqd Patches:

127111-02 s/b 127127-11

137111-04 s/b 137137-09 (Part Number B32314-02)

To support Pro*C/C++,Pro*FORTRAN,Oracle Call Interface,Oracle C++ Call Interface,Oracle XML Developers Kit (XDK)

112760-05 (Solaris 9)

117837-05 (Solaris X86 10)

117846-08 (Solaris X86 10)

118682-01 (Solaris X86 10)

ulimit(TIME) to unlimited. Refer to Note 250262.1

ulimit(FILE) to unlimited. Refer to Note 250262.1

ulimit(DATA) to a minimum of 1048576. Refer to Note 250262.1

ulimit(STACK) to a minimum of 32768. Refer to Note 250262.1

ulimit(NOFILES) to a minimum of 4096. Refer to Note 250262.1

ulimit(VMEMORY) to a minimum of 4194304. Refer to Note 250262.1

Required Packages:

SUNWarc,

SUNWbtool,

SUNWhea,

SUNWlibm,

SUNWlibms,

SUNWmfrun,

SUNWsprot,

SUNWsprox (Not applicable to Solaris 10),

SUNWtoo,

SUNWxwfnt,

SUNWi1cs,

SUNWi15cs,

SUNWi1of,

SUNWxcu4,

SUNWuiu8 and SUNWulcf - See Note 290034.1
Solaris 8 Reqd Patches:

108528-23

108652-66

108773-18

108921-16

108940-53

108987-13

108989-02

108993-45

109147-24

110386-03

111023-02

111111-03

111308-03

111310-01

112396-02

111721-04

112003-03

112138-01

112760-05 (Native PL/SQL,ProC,ProFortran,OCI,OCCI,XDK only)

SUNWctplx/ SUNWdtbax/ SUNWtltkx/ SUNWtoox/ SUNWxwicx/ SUNWxwplx/

and also Patch 108940-76 (or higher) in order to fix the SUNWdtbax package Note 366100.1

Solaris 9 Reqd Patches:

112233-11

111722-04 (Bug 4122475)

115675-01

113471-08

115675-01

112760-05 (Native PL/SQL,ProC,ProFortran,OCI,OCCI,XDK only)

112963-25

113029-07 for Fair Scheduler, See Note 558374.1

Solaris 10 Reqd Patches

127111-02 s/b 127127-11 for 10.2.0.4 or later (see README for 10.2.0.4.0)

127111-03 s/b 127127-11 See Note 460424.1

Solaris 10 x86_64 Reqd Patches:

118345-03

119961-01

127127-11 See Note 460424.1

Solaris 10 special instructions:

Select 'Do not create a starter database' when installing Oracle 10gR2 due to Bug 4884705 and run the DBCA after the installation.

The Fair Share Scheduler(FSS) requires Solaris 10 11/06 or higher.

If using a prior update of Solaris 10 install the following patches :

Install patch 118833-36 before installing Oracle 10gR2 for Solaris 10 on SPARC.

Install patch 118855-36 before installing Oracle 10gR2 for Solaris 10 on x86-64

IMPORTANT: Patch 4589082 needs to be installed prior to attempting an installation of 10.2 on Solaris 10 SPARC to avoid "Error
in invoking target 'relink' of makefile 'precomp/lib/ins_precomp.mk' related to -ldce not found. See also Note 333348.1.

IMPORTANT: See Note 1190843.1 regarding a related relinking issue in 10.2.0.5

Required Packages:

SUNWarc,

SUNWbtool,

SUNWhea,

SUNWlibC (CRS only)

SUNWlibm,

SUNWlibms,

SUNWmfrun,

SUNWsprot,

SUNWsprox (Not applicable to Solaris 10),

SUNWtoo,

SUNWxwfnt,

SUNWi1cs,

SUNWi15cs,

SUNWi1of

SUNWuiu8,SUNWulcf (if Bug 4025250 occurs)

SUNWxcu4
Solaris 8 Reqd Patches:

108528-23

108652-66

108773-18

108921-16

108940-53

108987-13

108989-02

108993-18

109147-24

110386-03

111023-02

111111-03

111308-03

111310-01

112396-02

111721-04

112003-03

112138-01

Solaris 9 Reqd Patches:

112233-11

111722-04 (Bug 4122475)

112963-25

113029-07 for Fair Scheduler, See Note 558374.1

Solaris 10 special instructions:

1. Execute runInstaller with the -ignoreSysPrereqs option.

2. Select 'Do not create a starter database' when installing Oracle 10g.

3. During installation, the warning message 'SUNWsprox package not installed' can be ignored as it is no longer provided separately. Press Continue to resume the installation.

4. Download and install PSR 10.1.0.4Patch 4163362(or apply PSR 10.1.0.3 Patch
3761843 and interim Patch 4163208 (SPARC) or patch
4186426 (x86) from support.oracle.com.

5. Download and install Patch 4365826from 10.1.0.3 or 10.1.0.4 from support.oracle.com. (SPARC only), also a merge patch containing
4365826 can be applied to 10.1.0.4.2 Patch 4590858

6. If you have an End User Solaris 10 distribution, install the SUNWuiu8 package prior to installing the 10g client.

7. The Fair Share Scheduler(FSS) requires Solaris 10 11/06 or higher.

If using a prior update of Solaris 10 install the following patches :

Install patch 118833-36 before installing Oracle 10gR2 for Solaris 10 on SPARC.

Install patch 118855-36 before installing Oracle 10gR2 for Solaris 10 on x86-64

8. Oracle Solaris 10 install Sun patch 127111-03 (SPARC) / 127127-11 (x86-64) See Note 460424.1

32bit/64bit

SUNWarc,

SUNWbtool,

SUNWhea,

SUNWlibm,

SUNWlibms,

SUNWmfrun,

SUNWsprot,

SUNWtoo

SUNWi1of and SUNWxwfnt (for Java)

SUNWsprox (for 64bit Oracle) (Not applicable to Solaris 10)

SUNWuiu8,SUNWulcf (if Bug 4025250 occurs)

SUNWxcu4
108528-05 (2.8)

Solaris 10 special instructions:

Execute runInstaller with the -ignoreSysPrereqs option

The Fair Share Scheduler(FSS) requires Solaris 10 11/06 or higher.

If using a prior update of Solaris 10 install the following patches :

Install patch 118833-36 before installing Oracle 10gR2 for Solaris 10 on SPARC.

Install patch 118855-36 before installing Oracle 10gR2 for Solaris 10 on x86-64

Oracle Solaris 10 install Sun patch 127111-03 (SPARC) / 127127-11 (x86-64) See Note 460424.1

32bit/64bit

SUNWarc,

SUNWbtool,

SUNWhea,

SUNWlibm,

SUNWlibms,

SUNWsprot,

SUNWtoo

SUNWxcu4
Additional

64bit

SUNWarcx,

SUNW2x (believe this is a typo and should be SUNWtoox)

108528-01 (2.8)

105181-15 (2.6)

SUNWarc,

SUNWbtool,

SUNWhea,

SUNWlibm, SUNWlibms, SUNWsprot,

SUNWtoo

SUNWxcu4
2.6 requires at least 105181-15

SUNWarc,

SUNWbtool,

SUNWhea,

SUNWlibm, SUNWlibms, SUNWsprot,

SUNWtoo
2.6 requires at least 105181-15

SUNWarc,

SUNWbtool, SUNWlibm, SUNWlibms,SUNWsprot,

SUNWtoo,

SUNWhea.
Sun 2.6 requires 105181-06

Solaris Kernel Settings

Refer to the 11g Solaris Install Guide. Part Number E24346-02 for steps to do this.

Verifying UDP and TCP Kernel Parameters

SEMMNI 100

SEMMNS 1024(Obsolete)

SEMMSL 256

SEMVMX 32767(Obsolete)

SHMMAX 4294967295

SHMMNI 100 (Obsolete)

NOEXEC_USER_STACK 1

Note: For Solaris 10 Oracle recommends still setting all these values in the /etc/system file, as well as, the Resource Control Facility.

Refer to the 11g Solaris Install Guide for steps to do this.
Here are the new names of the kernel parameters for Solaris 10 (Solaris 9 equivalents are in parentheses):

project.max-sem-ids 100 (semmni)
process.max-sem-nsems 256 (semmsl)
project.max-shm-memory 4294967295 (shmmax)
project.max-shm-ids 100 (shmmni)

SEMMNI 100 ***

SEMMNS 1024 **

SEMMSL 256 ***

SEMVMX 32767 **

SHMMAX 4294967295

SHMMIN 1 *

SHMMNI 100***

SHMSEG 10 *

NOEXEC_USER_STACK 1

* obsolete in Solaris 9 and 10

** obsolete in Solaris 10

*** default value in Solaris 10 is already larger

Note: for Solaris 10 SHMMAX which is now set through the Resource Control Facility not /etc/system. Refer to the 10gR2 for Solaris SPARC Installation guide for steps to do this, as well as, the Release Notes which has corrections:

10.2 Install Guides and Release Notes
Here are the new names of the kernel parameters for Solaris 10 (Solaris 9 equivalents are in parentheses):

project.max-sem-ids 100 (semmni)
process.max-sem-nsems 256 (semmsl)
project.max-shm-memory 4294967295 (shmmax)
project.max-shm-ids 100 (shmmni)

SEMMNI 100 ***

SEMMNS 1024 **

SEMMSL 256 ***

SHMMAX 4294967295

SHMMIN 1 *

SHMMNI 100***

SHMSEG 10 *

NOEXEC_USER_STACK 1

* obsolete in Solaris 9 and 10

** obsolete in Solaris 10

*** default value in Solaris 10 is already larger

SEMMNI 100

SEMMNS 256

SEMMSL 256

SHMMAX 4294967295

SHMMIN 1

SHMMNI 100

SHMSEG 10

SHMMAX 4294967295

SHMMIN 1

SHMMNI 100

SHMSEG 10

SEMMNI 100

SEMMSL Set to 10 plus the largest PROCESSES parameter of any Oracle database on the system.

SEMMNS Set to the sum of the PROCESSES parameter for each Oracle database, adding the largest one twice, then add an additional 10 for each database.

SEMOPM 100

SEMVMX 32767

SHMMAX 0.5*(physical memory present in machine)

SHMMIN 1

SHMMNI 100

SHMSEG 10

SEMMNI 100

SEMMSL Set to 10 plus the largest initsid.ora PROCESSES parameter of an Oracle database on the system.

SEMMNS Set to the sum of the PROCESSES parameter for each Oracle database except the largest one, plus 2 times the largest PROCESSES value, plus 10 times the number of Oracle databases.

SEMOPM 100

SEMVMX 32767

SHMMAX 4294967295

SHMMIN 1

SHMMNI 100

SHMSEG 10

SEMMNS 200

SEMMNI 70

SEMMSL Equal to or greater than the value of the

PROCESSES initialization parameter.

Oracle Version

11.2

11.1

10.2

10.1

9.2.0

9.0.1

8.1.7

8.1.6

8.1.5

8.0.6

8.0.5

Tru64 OS

do "/usr/sbin/sizer -v" to see specific version of Tru64, "uname -a" will not show it.

Not Available

5.1b

5.1a, 5.1b

5.0a, 5.1, 5.1a, 5.1b

4.0D-G, 5.0, 5.0a, 5.1, 5.1a, 5.1b(EV5.6 processor or higher) do '/usr/sbin/psrinfo -v'

4.0D-G, 5.0, 5.0a, 5.1

4.0D-G, 5.0, 5.0a, 5.1, 5.1a

4.0D-G, 5.0, 5.0a

Tru64 Disk Space

Not Available

1.2G Database

3G Software

1G Companion

150M-1.9G Client

4.5G

4.7G

1.5G

1.2G

811Mb

800Mb

Tru64 RAM

Not Available

1Gb

256Mb (Client/Compan)

512Mb

256Mb(Client/Compan)

512Mb

256Mb

128Mb

Tru64 swap

Not Available

2Gb or match RAM

512Mb(Client/Compan)

1Gb or match RAM

512Mb(Client/Compan)

1Gb or match RAM

400Mb

2-4*RAM

Tru64 tmp

Not Available

400Mb

75Mb

40Mb

Tru64 JDK & JRE

Not Available

SDK 1.4.2 needs to be installed

download here

JDK 1.3.1.03 & 1.1.8-10

JDK 1.2.2-8 & 1.1.8-10

JDK 1.2.2. & 1.1.8-7

1.1.8

n/a

Tru64 Patches/

Packages

Not Available

OSFCMPLRS

OSFLIBA

OSFPGMR

OSFSER

OSFX11
5.1B-3 (patchkit 5): T64V51BB26AS0005-20050502

OSFSER

OSFLIBA

OSFPGMR

OSFCMPLRS

OSFX11

OSFXDEVX (Spatial only)

OSFXINCLUDE (Spatial only)

OSFXLIBA (Spatial only)
5.1B-3 (patchkit 5): T64V51BB26AS0005-20050502

OSFSER

OSFLIBA

OSFPGMR

OSFCMPLRS

OSFX11
o 5.1a with patchkit 6 or higher required:

T64V51AB24AS0006-20031031

o HP Tru64 UNIX Performance improvement to times(3) system call:

T64KIT0023583-V51AB24-E-20040913

o HP Tru64 UNIX V5.1A PK6 (BL24) ERP Kit - file region locks can be inadvertently released as a result of AIO processing:

T64KIT0023109-V51AB24-E-20040729

o 5.1B-3 (patchkit 5): T64V51BB26AS0005-20050502

OSFSER

OSFLIBA

OSFPGMR

OSFCMPLRS

OSFX11
5.0a

patchkit 2 and bugfix HPAQ217F3 or

patchkit 3 and bugfix HPAQ217F3 or

patchkit 4

5.1

patchkit 5 with T64V5117_C0038300

_unique_id_and_mfg_date.tar T64V51B19-C0125001-14319-E-20020516.tar (C1250.01 PatchId), T64V51B19-C0151600-15736-E-20021017.tar (C1516.00 PatchId).Go to here to
download

5.1a

patchkit 4 with T64V51AB3-C0074700-15747-E-20021018.tar (C747.00 PatchId). Go to here to
download

5.1b = Patchkit 2 or greater, apply patch 01414.00 (included in Pk3) to address Note 261309.1 ld seg fault = Patchkit 2 or greater

The following additional 5.1b O/S patch is also required, please obtain from HP: T64KIT0021686-V51BB24-E-20040223 -- File Locking issue

OSFLIBA,

OSFPGMR,

OSFCMPLRS
4.0D = Patchkit 4 or greater

4.0E = Patchkit 2 or greater

4.0F = Patchkit 1 or greater

5.1 = Patchkit 5 or greater with T64V51B19-C0125001-14319-E-20020516.tar (C1250.01 PatchId) and T64V51B19-C0151600-15736-E-20021017.tar (C1516.00 PatchId). .Go tohere to
download

5.1a = Patchkit 3 or greater with T64V51AB3-C0074700-15747-E-20021018.tar (C747.00 PatchId). Go to here to
download

5.1b = Patchkit 2 or greater, apply patch 01414.00 (included in Pk3) to address Note 261309.1 ld seg fault

The following additional 5.1b O/S patch is also required, please obtain from HP: T64KIT0021686-V51BB24-E-20040223 -- File Locking issue

OSFLIBA,

OSFPGMR,

OSFCMPLRS
4.0D = Patchkit 4 or greater

4.0E = Patchkit 2 or greater

4.0F = Patchkit 1 or greater

OSFLIBA,

OSFPGMR,

OSFCMPLRS

OSFLIBA, OSFPGMR, OSFCMPLRS

Tru64 Kernel Settings

Not Available

PER_PROC_STACK_SIZE 8388608 33554432 to avoid ORA-4030s (Install Guide recommends 8388608)

MAX_PER_PROC_STACK_SIZE 33554432

PER_PROC_DATA_SIZE 335544320 or RAM (whichever is greater)

MAX_PER_PROC_DATA_SIZE 335544320 or RAM (whichever is greater)

PER_PROC_ADDRESS_SPACE 1073741824 or RAM (whichever is greater)

MAX_PER_PROC_ADDRESS_SPACE 1073741824 or RAM (whichever is greater)

SHM_MAX 4278190080 (4 GB less 16MB)

SHM_MIN 1

SHM_MNI 256

SHM_SEG 256

NEW_WIRE_METHOD 1 (if >= 5.1b PK3 and patch T64KIT0021686-V51BB24-E-20040223)Note 272697.1

for 5.1b PK5 and higher is defaulter to 1 and can no longer be changed

NEW_WIRE_METHOD 0 (if <= 5.1b PK2) Note 272697.1

VM_BIGPG_ENABLED 0

FIFO_DO_ADAPTIVE 0

SSM_THRESHOLD *

MSG_SIZE 32768

MAX_OBJS 5120

MAX_ASYNC_REQ 256

MAX_SESSIONS 500

RDG_MAX_AUTO_MSG_WIRES 0

RDG_AUTO_MSG_WIRES 0

AIO_TASK_MAX_NUM 8193

EXEC_DISABLE_ARG_LIMIT 1
* Set this attribute to 0 only if the rad_gh_regions
or gh_chunks attributes are set in the vm subsystem. Otherwise, do not change the value.

PER_PROC_STACK_SIZE 8388608 33554432 to avoid ORA-4030s (Install Guide recommends 8388608)

MAX_PER_PROC_STACK_SIZE 33554432

PER_PROC_DATA_SIZE 335544320

MAX_PER_PROC_DATA_SIZE 335544320

PER_PROC_ADDRESS_SPACE 1073741824 or RAM (whichever is greater)

MAX_PER_PROC_ADDRESS_SPACE 1073741824 or RAM (whichever is greater)

SHM_MAX 4278190080 (4 GB less 16MB)

SHM_MIN 1

SHM_MNI 256

SHM_SEG 256

NEW_WIRE_METHOD 1 (if >= 5.1b PK3 and patch T64KIT0021686-V51BB24-E-20040223)Note 272697.1

for 5.1b PK5 and higher is defaulter to 1 and can no longer be changed

NEW_WIRE_METHOD 0 (if <= 5.1b PK2) Note 272697.1

VM_BIGPG_ENABLED 0

FIFO_DO_ADAPTIVE 0

SSM_THRESHOLD *

MSG_SIZE 32768

MAX_OBJS 5120

MAX_ASYNC_REQ 256

MAX_SESSIONS 500

RDG_MAX_AUTO_MSG_WIRES 0

RDG_AUTO_MSG_WIRES 0

AIO_TASK_MAX_NUM 8193
* Set this attribute to 0 only if the rad_gh_regions
or gh_chunks attributes are set in the vm subsystem. Otherwise, do not change the value.

MAX_PER_PROC_STACK_SIZE 33554432

PER_PROC_STACK_SIZE 8388608 33554432 to avoid ORA-4030s (Install Guide recommends 8388608)

PER_PROC_DATA_SIZE 201326592

SHM_MAX 4278190080 (4 GB less 16MB)

SHM_MIN 1

SHM_MNI 256

SHM_SEG 128

NEW_WIRE_METHOD 1 (if >= 5.1b PK3 and patch T64KIT0021686-V51BB24-E-20040223 or 5.1a PK6)Note 272697.1

for 5.1b PK5 and higher is defaulter to 1 and can no longer be changed

NEW_WIRE_METHOD 0 (if <= 5.1b PK2) Note 272697.1

VM_BIGPG_ENABLED 0

FIFO_DO_ADAPTIVE 0
Alpha processor EV5.6 or later

PER_PROC_STACK_SIZE 33554432

MAX_PER_PROC_STACK_SIZE 536870912

PER_PROC_DATA_SIZE RAM

MAX_PER_PROC_DATA_SIZE RAM

PER_PROC_ADDRESS_SIZE RAM

MAX_PER_PROC_ADDRESS_SIZE RAM

SHM_MAX 4278190080 (4 GB less 16MB)

SHM_MIN 1

SHM_MNI 256

SHM_SEG 128

NEW_WIRE_METHOD 1 (if >= 5.1b PK3 and patch T64KIT0021686-V51BB24-E-20040223) Note 272697.1

for 5.1b PK5 and higher is defaulter to 1 and can no longer be changed

NEW_WIRE_METHOD 0 (if <= 5.1b PK2) Note 272697.1

FIFO_DO_ADAPTIVE 0
Alpha processor EV5.6 or later

SHMMAX 2139095040(2GB-8MB)

SHMMIN 1

SHMMNI 100

SHMSEG 32

NEW_WIRE_METHOD 1 (if >= 5.1b PK3 and patch T64KIT0021686-V51BB24-E-20040223) Note 272697.1

for 5.1b PK5 and higher is defaulter to 1 and can no longer be changed

NEW_WIRE_METHOD 0 (if <= 5.1b PK2)Note 272697.1

FIFO_DO_ADAPTIVE 0
vm-mapentries=1024 in the /etc/sysconfigtab, verify with '/sbin/sysconfig -q vm' - applies to OS versions below 5.0, starting in 5.0 it is autoset

Alpha processor EV5.6 or later

SHMMAX 2139095040(2GB-8MB)

SHMMIN 1

SHMMNI 100

SHMSEG 32

SHMMAX 8388608 or higher than the maximum SGA size.

Note: If anticipated SGA size is greater than 2 GB, set it to 2 GB - 8 MB; otherwise, round the SGA sizeup to the next 8 MB and set that to SHMMAX.

SHMMIN 1

SHMMNI 100

SHMSEG 32

SHMMAX

2139095040 (2 GB-8 MB)

SHMMIN 1

SHMMNI 100

SHMSEG 32

SHMMAX 8388608 or higher than the maximum SGA size.

Note: If anticipated SGA size is greater than 2 GB, set it to 2 GB - 8 MB; otherwise, round the SGA size up to the next 8 MB and set

that to SHMMAX.

SHMMIN 1

SHMMNI 100

SHMSEG 32

Oracle Version

11.2

11.1

10.2

10.1

9.2.0

9.0.1

8.1.7

8.1.6

8.1.5

8.0.6

8.0.5

Linux x86 OS

(See Note 225710.1 for supported kernels) andNote 265262.1for "Things
to know about Linux"

o RHEL4,OEL4 - Update 7 or greater which is Kernel 2.6.9-78 or newer

o RHEL5, OEL5 - 5.2 or greater which is Kernel 2.6.18-92 or newer

o SLES10 - Kernel 2.6.16.21 or higher

o SLES 11 - Kernel 2.6.27.19-5 or greater

o Asianux Server 3 SP2

o RHEL4, OEL4, Asianux 2.0

2.6.9

o RHEL5, OEL5, Asianux Server 3

2.6.18

o SuSE SLES10

2.6.16.21

o SuSE SLES11 - Kernel 2.6.27.19-5 or greater

o RHEL 3 AS/ES ( RHEL3 ) (Update 4 or later)

2.4.21-27.EL or higher

o RHEL 4 AS/ES ( RHEL4 ) and Oracle Enterprise Linux 4 ( OEL4 )

2.6.9-5.0.5.EL or higher

o RHEL 5 AS/ES ( RHEL5 ) and Oracle Enterprise Linux 5 ( OEL5 )

2.6.18-8 or higher

o SuSE SLES9

2.6.5-7.201 or higher

o SuSE SLES10

o SuSE SLES11 - Kernel 2.6.27.19-5 or greater

o Asianux 1.0

2.4.21-27.EL or higher

o Asianux 2.0

2.6.9-5.0.5.EL or higher

o RHEL AS/ES 2.1 (Update 3 or higher)

2.4.9-e34 or higher

o RHEL AS/ES 3.0 (Update 2 or higher)

2.4.21-15.EL or higher

o RHEL4 (10.1.0.3.0 patchset required)

refer to 10.1.0.3.0 Release Notes

o SuSE SLES8 (Service Pack 3 or higher)

2.4.21-138

o SuSE SLES9

2.6.5-7.5

o Red Flag Advanced Server 4.0 (China only)

o Miracle Linux Std Ed 2.1 (Japan only)

o Asianux 1.0

o Red Hat Enterprise AS/ES 2.1

2.4.9-e34 or higher

o Red Hat Enterprise AS/ES 3.0

2.4.21-15

o RHEL4 (9.2.0.6.0 patchset required or 9.2.0.5.0 patchset and Patch 4276910 required)

refer to 9.2.0.4 Release Notes

o SuSE SLES8

2.4.21-138

o SuSE SLES9

2.6.5-7.97

o United Linux 1.0 (SP3 or higher)

o Red Flag DC Server 4.0 (China and Hong Kong only)

o Monta Vista Carrier Grade Linux 3.0 (embedded)

o Miracle Linux Std Ed 2.1 (Japan only)

2.4.7

o Asianux 1.0

Caldera OU8+LKP, Red Hat 7.1, Advanced Server 2.1, SuSE 7.1, 7.2, SLES7, Kernel 2.4.4

Caldera OU8+LKP, Miracle 1.0, 2.0, Red Hat 6.1,6.2, EE 6.2, 7.0, 7.1, Advanced Server 2.1, SuSE 7.0, 7.1, 7.2, SLES7, Kernel 2.2.16

Miracle 1.0, Red Hat 6.0,6.1,6.2, EE 6.2, SuSE 6.3, 6.4, 7.0, VA 6.2, Kernel 2.2

Red Hat 6.2, EE 6.2, SuSE 6.3, 6.4, Kernel 2.2

Red Hat 6.2, SuSE 6.4, 7.0, Kernel 2.0.34

2.0.34

Linux x86 Disk Space

3.8G Database

2G Database

3.5G Install

1.2G Database

1.5 to 3.5G Install

1.2G Database

1.5G Software

1G Companion

150M-650M Client

4.5G

3.5G

900Mb

811Mb

400Mb

Linux x86 RAM

1GB

512Mb

256Mb(Client/Compan)

512Mb

128Mb

32Mb

Linux x86 swap

If RAM=1 GB to 2 GB then 1.5 times RAM

If RAM=2 GB to 16 GB then equal to RAM

If greater than 16 GB then 16 GB

If RAM between 1 GB and 2 GB

then 1.5 times RAM

elseif RAM between 2 GB and 16 GB

then match RAM

else RAM > 16 GB

then 16 GB

If RAM = 1024MB to 2048Mb

then 1.5 times RAM

elseif RAM > 2048MB and < 8192MB

then match RAM

else RAM > 8192MB

then .75 times RAM

1Gb or match RAM

512Mb(Client/Compan)

1Gb or match RAM

512Mb

400Mb

256Mb

3*RAM

Linux x86 tmp

1024Mb

400Mb

75Mb

20Mb

Linux x86 JDK & JRE

JDK (version TBS) is installed

JDK 1.4.2_08 is installed

JDK 1.4.2_02 is installed

Sun JDK 1.3.1_02 & Blackdown 1.1.8_v3

Blackdown JDK 1.1.8_3 & 1.1.8_v3

JDK 1.2.2. & 1.1.8-3from IBM

1.1.8

1.1.6v5

n/a

Linux x86 Patches/

Packages

RHEL4, OEL4:

Refer to Note 880211.1

binutils-2.15.92.0.2-25
compat-libstdc++-33-3.2.3-47.3
elfutils-libelf-0.97.1-5
glibc-2.3.4-2.41
glibc-common-2.3.4-2.41
libaio-0.3.105-2
libgcc-3.4.6-10
libstdc++-3.4.6-10
make-3.80-7.EL4
pdksh-5.2.14-30.6
unixODBC-2.2.11-1.RHEL4.1
The remaining Install Guide requirements will have to be installed:
elfutils-libelf-devel-0.97.1-5.i386.rpm
glibc-headers-2.3.4-2.41.i386.rpm
glibc-kernheaders-2.4-9.1.103.EL.i386.rpm will be required as a prerequisite
glibc-devel-2.3.4-2.41.i386.rpm
gcc-3.4.6-10.i386.rpm
libstdc++-devel-3.4.6-10.i386.rpm
gcc-c++-3.4.6-10.i386.rpm
libaio-devel-0.3.105-2.i386.rpm
sysstat-5.0.5-19.el4.i386.rpm
unixODBC-devel-2.2.11-1.RHEL4.1.i386.rpm
NOTE: If you download unixODBC from ftp://ftp.unixodbc.org/pub/unixODBC/ then the header and library files are distributed together in one gzipped tar file.

RHEL5, OEL5:

Refer to Note 880936.1

RHEL6, OEL6:

Refer to Note 1441282.1

SLES10:

Refer to Note 763386.1

SLES11:

Refer to Note 881025.1

Asianux 2.0,OEL4,RHEL4:

refer to Note 430653.1
default Update 3 RPMs install or higher, see Note 376183.1
binutils-2.15.92.0.2-18 *
compat-libstdc++-33.2.3-47.3 *
elfutils-libelf-0.97-5 *
elfutils-libelf-devel-0.97-5
glibc-2.3.4-2.19 *
glibc-common-2.3.4-2.19 *
glibc-devel-2.3.4-2.19
glibc-headers-2.3.4-2.19 (glibc-devel required RPM)
glibc-kernheaders-2.4-9.1.98 (glibc-devel required RPM)
gcc-3.4.5-2
gcc-c++-3.4.5-2
libaio-0.3.105-2 *
libaio-devel-0.3.105-2
libgcc-3.4.5 *
libstdc++-3.4.5-2 *
libstdc++-devel-3.4.5-2
make-3.80-5 *
sysstat-5.0.5 *
unixODBC-2.2.11-1.RHEL4
unixODBC-devel-2.2.11-1.RHEL4

* default OS installed
NOTE: If you download unixODBC from ftp://ftp.unixodbc.org/pub/unixODBC/ then the header and library files are distributed together in one gzipped tar file.

Asianux Server 3,OEL5,RHEL5:

refer to Note 438765.1

default RPM install, see Note 376183.1
binutils-2.17.50.0.6-2.el5 *
compat-libstdc++-33-3.2.3-61
elfutils-libelf-0.125-3.el5 *
elfutils-libelf-devel-0.125-3.el5
elfutils-libelf-devel-static-0.125-3.el5

(required by elfutils-libelf-devel)
glibc-2.5-12 *
glibc-common-2.5-12 *
glibc-devel-2.5-12
glibc-headers-2.5-12

(required by glibc-devel)
gcc-4.1.1-52.el5
gcc-c++-4.1.1-52.el5
libaio-0.3.106
libaio-devel-0.3.106
libgcc-4.1.1-52
libgomp-4.1.1-52.el5

(required by gcc)
libstdc++-4.1.1-52.el5 *
libstdc++-devel-4.1.1-52.el5
make-3.81-1.1 *
sysstat-7.0.0-3.el5
unixODBC-2.2.11-7.1
unixODBC-devel-2.2.11-7.1

* default OS installed
NOTE: If you download unixODBC from ftp://ftp.unixodbc.org/pub/unixODBC/ then the header and library files are distributed together in one gzipped tar file.

SLES10:

refer to Note 452818.1

default RPM install, see Note 386391.1
binutils-2.16.91.0.5-23.4 *
compat-libstdc++-5.0.7-22.2 *
glibc-2.4-31.2 *
glibc-devel-2.4-31.2
gcc-4.1.0-28.4
gd-2.0.32-23.2

(required by sysstat)
gnuplot-4.0.0-20.2

(requried by sysstat)
ksh-93r-12.9 *
libaio-0.3.104-14.2 *
libaio-devel-0.3.104-14.2
libelf-0.8.5-47.2
libgcc-4.1.0-28.4 *
libstdc++-4.1.0-28.4 *
libstdc++-devel-4.1.0-28.4
make-3.80-202.2 *
plotutils-2.4.1-591.2

(required by sysstat)
sysstat-6.0.2-16.4
unixODBC-2.2.11-21.4
unixODBC-devel-2.2.11-21.4

* default OS installed
NOTE: If you download unixODBC from ftp://ftp.unixodbc.org/pub/unixODBC/ then the header and library files are distributed together in one gzipped tar file.

SLES11:

refer to Note 849583.1

RHEL3: default RPMS (see Note 376183.1)
gcc-3.2.3-34
glibc-2.3.2-95.20
make-3.79.1
openmotif21-2.1.30-8
compat-db-4.0.14.5
compat-gcc-7.3-2.96.128
compat-gcc-c++-7.3-2.96.128
compat-libstdc++-7.3-2.96.128
compat-libstdc++-devel-7.3-2.96.128
setarch-1.3-1
XFree86 (Spatial only)
XFree86-devel (Spatial only)
RHEL4:

refer to Note 343431.1 default RPMS (seeNote 376183.1)

binutils-2.15.92.0.2-10.EL4
compat-db-4.1.25-9
compat-libstdc++-296-2.96-132.7.2
compat-libstdc++-33-3.2.3-47.3
control-center-2.8.0-12
gcc-3.4.3-9.EL4
gcc-c++-3.4.3-9.EL4
glibc-2.3.4-2
glibc-common-2.3.4-2
gnome-libs-1.4.1.2.90-44.1
libstdc++-3.4.3-9.EL4
libstdc++-devel-3.4.3-9.EL4
make-3.80-5
pdksh-5.2.14-30
sysstat-5.0.5-1
xscreensaver-4.18-5.rhel4.2
openmotif21-2.1.30-11.RHEL4.2 (required to install Oracle demos)
libaio-0.3.102-1
[Red Hat,Oracle] Enterprise Linux 5.0

Refer to Note 419646.1

default RHEL5 RPMs (see Note 376183.1)
default OEL5 RPMs (see Note 401167.1)
gcc-c++-4.1.1-52.el5.i386.rpm and all its dependent packages.

The dependent packages are:

gcc-4.1.1-52.el5.i386.rpm

libstdc++-devel-4.1.1-52.el5.i386.rpm

glibc-devel-2.5-12.i386.rpm

glibc-headers-2.5-12.i386.rpm

libgomp-4.1.1-52.el5.i386.rpm
libXp-1.0.0-8.i386.rpm
compat-gcc-34-3.4.6-4.i386rpm
compat-gcc-c++-34-3.4.6-4.i386rpm
compat-libstdc++-33-3.2.3-61.i386.rpm
sysstat-5.0.5-1.i386.rpm (OEL5 only)
SuSE SLES9:

Refer to Note 400429.1

default-RPMs (see NOTE 386391.1)
glibc-devel-2.3.3-98.47.i586.rpm
gcc-3.3.3-43.34.i586.rpm.
libstdc++-devel-3.3.3-43.34.i586.rpm
gcc-c++-3.3.3-43.34.i586.rpm
db1-1.85-85.1.i586.rpm
orbit-0.5.17-330.1.i586.rpm
gnome-libs-1.4.1.7-671.1.i586.rpm.
plotutils-2.4.1-575.1.i586.rpm
gnuplot-3.7.3-256.1.i586.rpm
sysstat-5.0.1-35.4.i586.rpm.
SLES10:

refer to Note 387137.1

default RPM install, see Note 386391.1
glibc-devel-2.4-31.2.i586.rpm
gcc-4.1.0-28.4.i586.rpm
libstdc++-devel-4.1.0-28.4.i586.rpm
gcc-c++-4.1.0-28.4.i586.rpm
libaio-devel-0.3.104-14.2.i586.rpm
SLES11:

refer to Note 842649.1

RHEL ES/AS 2.1:
make-3.79
gcc-2.96-128
gcc-c++-2.96-128
openmotif-2.1.30-11
glibc-2.2.4-32
libstdc++-2.96-128
XFree86 (Spatial only)
XFree86-devel (Spatial only)
RHEL ES/AS 3:

Refer to Note 394360.1

default-RPMs (see NOTE 376183.1)
gcc-3.2.3-34
gcc-c++-3.2.3-34
libstdc++-devel-3.2.3.3-34
libaio-0.3.96-3.i386.rpm (required to configure Async IO)
libaio-devel-0.3.96-3.i386.rpm (required to configure Async IO)
XFree86 (Spatial only)
XFree86-devel (Spatial only)

set LD_ASSUME_KERNEL=2.4.19
RHEL4:

Refer to Note 392940.1

Patch 4153257 required for installer to work

default RPMS (see Note 376183.1)
binutils-2.15.92.0.2-10.EL4
compat-db-4.1.25-9
compat-libstdc++-296-2.96-132.7.2
compat-libstdc++-33-3.2.3-47.3
control-center-2.8.0-12
gcc-3.4.3-9.EL4
gcc-c++-3.4.3-9.EL4
glibc-2.3.4-2
glibc-common-2.3.4-2
gnome-libs-1.4.1.2.90-44.1
libstdc++-3.4.3-9.EL4
libstdc++-devel-3.4.3-9.EL4
make-3.80-5
pdksh-5.2.14-30
sysstat-5.0.5-1
xscreensaver-4.18-5.rhel4.2
openmotif21-2.1.30-11.RHEL4.2 (required to install Oracle demos)
libaio-0.3.96
SuSE SLES8:

Requires 10.1.0.3 Full Release (CD Release)

make-3.79.1
gcc-3.2.2-38
gcc-c++-3.2.2-38
glibc-2.2.2-124
openmotif-2.2.2-124
xf86 (Spatial only)
xdevel (Spatial only)
SuSE SLES9:

Requires 10.1.0.3 Full Release (CD Release)

make-3.80
gcc-3.3.3-43
gcc-c++-3.3.3-43
glibc-2.3.3-98
libaio-0.3.98-18
libaio-devel-0.3.98-18
openmotif-libs-2.2.2-519.1
xfree86 (Spatial only)
xfree86-devel (Spatial only)

RHEL ES/AS 2.1:
glibc 2.2.4-32
make-3.79
openmotif-2.1.30
gcc-2.96-128
gcc-c++-2.96-128
libstdc++-2.96-128
RHEL ES/AS 3:

Refer to Note 252217.1 default RPMS (see Note 376183.1)

glibc 2.3.2-95.20
gcc-3.2.3-34
make-3.79.1
compat-db-4.0.14.5
compat-gcc-7.3-2.96.128
compat-gcc-c++-7.3-2.96.128
compat-libstdc++-7.3-2.96.128
compat-libstdc++-devel-7.3-2.96.128
gnome-libs-1.4.1.2.90-34.1
openmotif21-2.1.30-8
setarch-1.3-1
To be able to install patch 3006854 these RPMs need to be installed

glibc-devel-2.3.2-95.6.i386.rpm
glibc-headers-2.3.2-95.20
glibc-kernheaders-2.4-8.34

Additional steps:

Note 252217.1 for additional setup requirements for RHEL3 and 9.2 x86

for Async I/O functionality to work you need to install Patch 3016968 on top of 9.2.0.3.0 or 9.2.0.4.0 or Patch
3208258 on top of 9.2.0.5.0 or 9.2.0.6.0
RHEL4:

Refer to Note 303859.1 default RPMS (see Note 376183.1)

compat-db-4.1.25-9
compat-gcc-32-3.2.3-47.3
compat-gcc-32-c++-3.2.3-47.3
compat-oracle-rhel4-1.0-3 (obtain Patch 4198954)
compat-libcwait-2.0-1 (obtain Patch 4198954)
compat-libgcc-296-2.96-132.7.2
compat-libstdc++-296-2.96-132.7.2
compat-libstdc++-33-3.2.3-47.3
gcc-3.4.3-9.EL4
gcc-c++-3.4.3-9.EL4
gnome-libs-1.4.1.2.90-44
gnome-libs-devel-1.4.1.2.90-44
libaio-devel-0.3.102-1
libaio-0.3.102-1
make-3.80-5
openmotif21-2.1.30-11
xorg-x11-deprecated-libs-devel-6.8.1-23.EL
xorg-x11-deprecated-libs-6.8.1-23.EL

Patch 4188455 required for installer to work

Set LD_ASSUME_KERNEL=2.4.19

Post install you need to apply Patch 4190568on top of the 9.2.0.6 patchset

Note 303859.1 for more specific steps for 9.2.0.6 on RHEL4
SuSE SLES8:

gcc-3.2.2-38
glibc-2.2.2-124
make-3.79.1
openmotif-2.2.2-124
SuSE SLES9:

Refer to Note 427976.1 default RPMS (see Note 386391.1)

glibc-2.3.3
gcc-3.3.3
gcc-c++-3.3.3
libaio-0.3.98
libaio-devel-0.3.98
make-3.80
openmotif-libs-2.2.2-519.1
orarun-1.8-109

Additional steps for SLES9 for 9.2 32bit x86:

Install 9.2.0.4 (Complete release) and then apply 9.2.0.5 and 9.2.0.5 one-off Patch 3809563 or 9.2.0.6 patchset

If using Bourne, Bash, or Korn shell: ( /usr/lib/libInternalSymbols.so can be obtained from the orarun package )

ORACLE_BASE= ; export ORACLE_BASE

LD_ASSUME_KERNEL=2.4.21; export LD_ASSUME_KERNEL

LD_PRELOAD=/usr/lib/libInternalSymbols.so ; export LD_PRELOAD

for Async I/O functionality to work you need to install Patch 3208258 on top of 9.2.0.5.0 or 9.2.0.6.0

make-3.79, and binutils-2.10.

GLIBC package version 2.1.3 or higher

GLIBC package version 2.1

GNU C Library, version 2.0.6

GLIBC package version 2.1

GNU C Library, version 2.0.7

TCL library (libtcl.so), version 8.0.2-16

Linux x86 Kernel Settings

kernel.shmmni = 4096

kernel.sem = 250 32000 100 128

fs.file-max = 6815744 512 x processes (for example 6815744 for 13312 processes)

net.ipv4.ip_local_port_range = 9000 65500

net.core.rmem_default = 262144

net.core.rmem_max = 4194304

net.core.wmem_default = 262144

net.core.wmem_max = 1048576

SEMMSL 250

SEMMNS 32000

SEMMNI 128

SEMOPM 100

SHMMAX RAM times 0.5 Note 567506.1)

SHMMNI 4096

SHMALL = SHMMAX/pagesize

FILE-MAX =6815744 512* Processes

IP_LOCAL_PORT_RANGE 9000 65500

RMEM_DEFAULT 262144

RMEM_MAX 4194304

WMEM_DEFAULT 262144

WMEM_MAX 2621441048576

NET.IPV4.TCP_RMEM 4194304 4194304 4194304

NET.IPV4.TCP_WMEM 262144 262144 262144

SuSE SLES9:

SEMMSL 250

SEMMNS 32000

SEMMNI 128

SEMOPM 100

SHMMAX RAM times 0.5 (Note 567506.1)

SHMMNI 4096

SHMALL = SHMMAX/pagesize

FILE-MAX 65536

IP_LOCAL_PORT_RANGE 9000 65500

RMEM_DEFAULT 262144

RMEM_MAX 2097152

WMEM_DEFAULT 262144

WMEM_MAX 262144

NET.IPV4.TCP_RMEM 1048576 1048576 1048576

NET.IPV4.TCP_WMEM 262144 262144 262144

Other Linux OS:

SEMMSL 250

SEMMNS 32000

SEMMNI 128

SEMOPM 100

SHMMAX RAM times 0.5 (Note 567506.1)

SHMMNI 4096

SHMALL = SHMMAX/pagesize

FILE-MAX 65536

IP_LOCAL_PORT_RANGE 9000 65500

RMEM_DEFAULT 262144

RMEM_MAX 2097152

WMEM_DEFAULT 262144

WMEM_MAX 262144

NET.IPV4.TCP_RMEM 1048576 1048576 1048576

NET.IPV4.TCP_WMEM 262144 262144 262144

SEMMNI 100

SEMMNS 256

SEMMSL 100

SEMOPM 100

SEMVMX 32767

SHMMAX 2147483648

One-half the size of your system's physical memory. Check your system for additional restrictions.

SHMMIN 1

SHMMNI 4096

SHMSEG 4096

SHMMAX 0.5*(physical memory present in machine) but not greater then 4Gb

SHMMIN 1

SHMMNI 100

SHMSEG 10

SEMMNI 100

SEMMSL Set to 10 plus the largest PROCESSES parameter of any Oracle database on the system.

SEMMNS Set to the sum of the PROCESSES parameter for each Oracle database, adding the largest one twice, then add an additional 10 for each database.

SEMOPM 100

SEMVMX 32767

SHMMAX 0.5 *(physical memory present in machine) but not greater then 4Gb

SHMMIN 1

SHMMNI 100

SHMSEG 10

SEMMNI 100

SEMMSL Set to 10 plus the largest initsid.ora PROCESSES parameter of an Oracle database on the system.

SEMMNS Set to the sum of the PROCESSES parameter for each Oracle database except the largest one, plus 2 times the largest PROCESSES value, plus 10 times the number of Oracle databases.

SEMOPM 100

SEMVMX 32767

SHMMAX (1/4 of RAM) but not greater then 4Gb

SHMMIN 1

SHMMNI 100

SHMSEG 10

SEMMNS 200

SEMMNI 70

SEMMSL Equal to or greater than the value of the

PROCESSES initialization parameter.

SHMMAX (1/4 of RAM) but not greater then 4Gb

SHMMIN 1

SHMMNI 100

SHMSEG 10

SEMMNS 200

SEMMNI 70

SEMMSL Equal to or greater thanthe value of the

PROCESSES initialization parameter.

Oracle Version

11.2

11.1

10.2

10.1

9.2.0

9.0.1

8.1.7

8.1.6

8.1.5

8.0.6

8.0.5

Linux x86_64 EM64T AMD64 OS

(See Note 225710.1 for supported kernels) andNote 265262.1for "Things
to know about Linux"

o RHEL4,OEL4 - update 7 or greater

o RHEL5,OEL5 - 5.2 or greater

o RHEL6,OEL6 - 6.0 or greater

o SLES10 - Kernel 2.6.16.21-0.8 or greater

o SLES11 - Kernel 2.6.27.19-5 or greater

o Asianux Server 3 SP2

NOTE: On RHEL6/OEL6, 11.2.0.3 or later is certified (not 11.2.0.1 or 11.2.0.2)

Refer Note 1304727.1 for certification information

Refer 11.2 DB Installation Guide for Linux for Kernel requirement

Asianux 2.0, [Red Hat,Oracle] Enterprise Linux 4.0:

2.6.9
Asianux Server 3, [Red Hat,Oracle] Enterprise Linux 5.0:

2.6.18
SUSE Linux Enterprise Server 10:

2.6.16.21
SuSE Linux Enterprise Server 11:

2.6.27.19-5 or greater

o Red Hat Enterprise Linux ( RHEL 3 ) AS/ES (Update 4 or later)

2.4.21-27.EL

o RHEL4 AS/ES (Update 1 or later) or OEL4

2.6.9-11.EL

o RHEL5 AS/ES or OEL5

2.6.18-8 or higher

o SUSE Linux Enterprise Server 9.0 (SLES9) with SP2 or later

2.6.5-7.201

o SuSE Linux Enterprise Server 10 (SLES10)

2.6.16.21-0.8 (or later)

o SuSE Linux Enterprise Server 11 (SLES11)

2.6.27.19-5 or greater

o Asianux 2.0

o Red Hat Enterprise AS/ES 3.0 (Update 2 or higher)

2.4.21-15.EL

o Red Hat Enterprise AS/ES 4.0 (Update 1 or higher)

2.6.9-11.EL smp

o SuSE SLES8 (Service Pack 3 or higher)

2.4.21-185-smp

o SuSE SLES9

2.6.5-7.97

o Asianux 1.0

requires 10.1.0.3

o Red Hat Enterprise AS/ES 3.0

2.4.21-9

o Red Hat Enterprise AS/ES 4.0

minimum patchset level is 9.2.0.7.0

o SuSE SLES8

2.4.21-185

o SuSE SLES9

9.2.0.6 Required - needed for EM64T patch 4261532 & patch
4233179

Linux x86_64 EM64T AMD64 Disk Space

3.8Gb Database

1.68G Database

3.8G to 4.4G Software

1.2G Database

1.5 to 3.5G Install

1.2G Database

1.5G Software

1G Companion

150M-650M Client

4.5G

Linux x86_64 EM64T AMD64 RAM

Database: minimum 1GB, recommended 2GB
Grid Infrastructure for standalone server: minimum 1.5GB (plus another 1GB if installing Database too), recommended 4GB

1GB

512Mb

256Mb(Client/Compan)

512Mb

Linux x86_64 EM64T AMD64 swap

11.2 DB Installation Guide for Linuxsays:

If RAM between 1 GB and 2 GB then 1.5 times the size fo RAM.

If RAM between 2 GB to 16 GB then equal to the size of RAM.

If RAM greater than 16 GB then 16 GB.
11.2 Grid Infrastructure (GI) Installation Guide for Linux says:

If RAM between 2 GB and 8 GB then 2 times the size fo RAM.

If RAM between 8 GB to 32 GB then 1.5 times the size of RAM.

If RAM greater than 32 GB then 32 GB.

If RAM 1 GB and 2 GB

then 1.5 times the size fo RAM.

If RAM 2 GB to 16 GB

then equal to the size fo RAM.

If RAM greater than 16 GB

then 16 GB
Automatic Memory Management

Starting with Oracle Database 11g, the Automatic Memory Management feature requires more shared memory (/dev/shm) and file descriptors. The shared memory should be sized to be at least the greater of MEMORY_MAX_TARGET and MEMORY_TARGET for each Oracle instance
on the computer. To determine the amount of shared memory available, enter the following command: # df -k /dev/shm/

Note: MEMORY_MAX_TARGET and MEMORY_TARGET cannot be used when LOCK_SGA is enabled or with huge pages on Linux

If RAM = 1024MB to 2048Mb

then 1.5 times RAM

elseif RAM > 2048MB and < 8192MB

then match RAM

else RAM > 8192MB

then .75 times RAM

1Gb or match RAM

512Mb(Client/Compan)

1Gb or match RAM

Linux x86_64 EM64T AMD64 tmp

1024Mb

400Mb

Linux x86_64 EM64T AMD64 JDK & JRE

You can use Sun JDK 1.5.0-06 with the JNDI extension JDK versions with the Oracle Java Database Connectivity and Oracle Call Interface drivers.

However, these are not mandatory for the installation

JDK 1.4.2_08 is installed

JDK 1.4.2_02 is installed

o Sun JDK 1.4.2_03 is installed

Linux x86_64 EM64T AMD64 Patches/

Packages

RHEL6,OEL6:

Refer to Note 1441282.1

RHEL5,OEL5:

Refer to Note 880989.1

binutils-2.17.50.0.6-6.el5 (x86_64)

compat-libstdc++-33-3.2.3-61 (x86_64) << both ARCH's are required. See next line.

compat-libstdc++-33-3.2.3-61 (i386) << both ARCH's are required. See previous line.

elfutils-libelf-0.125-3.el5 (x86_64)

glibc-2.5-24 (x86_64) << both ARCH's are required. See next line.

glibc-2.5-24 (i686) << both ARCH's are required. See previous line.

glibc-common-2.5-24 (x86_64)

ksh-20060214-1.7 (x86_64)

libaio-0.3.106-3.2 (x86_64) << both ARCH's are required. See next line.

libaio-0.3.106-3.2 (i386) << both ARCH's are required. See previous line.

libgcc-4.1.2-42.el5 (i386) << both ARCH's are required. See next line.

libgcc-4.1.2-42.el5 (x86_64) << both ARCH's are required. See previous line.

libstdc++-4.1.2-42.el5 (x86_64) << both ARCH's are required. See next line.

libstdc++-4.1.2-42.el5 (i386) << both ARCH's are required. See previous line.

make-3.81-3.el5 (x86_64)

The remaining Install Guide requirements will have to be installed:

elfutils-libelf-devel-0.125-3 (x86_64)

a.) requires elfutils-libelf-devel-static-0.125-3 (x86_64) as a prerequisite, as listed below.

b.) elfutils-libelf-devel and elfutils-libelf-devel-static each depend upon the other. Therefore, they must be installed together, in one (1) "rpm -ivh" command as follows:

rpm -ivh elfutils-libelf-devel-0.125-3.el5.x86_64.rpm elfutils-libelf-devel-static-0.125-3.el5.x86_64.rpm

glibc-headers-2.5-24 (x86_64)

a.) requires kernel-headers-2.6.18-92 (x86_64) as a prerequisite, as listed below

glibc-devel-2.5-24 (x86_64) << both ARCH's are required. See next item.

glibc-devel-2.5-24 (i386) << both ARCH's are required. See previous item.

gcc-4.1.2-42.el5 (x86_64)

a.) requires libgomp-4.1.2-42 (x86_64) as a prerequisite, as listed below

libstdc++-devel-4.1.2-42 (x86_64)

gcc-c++-4.1.2-42.el5 (x86_64)

libaio-devel-0.3.106-3.2 (x86_64) << both ARCH's are required. See next item

libaio-devel-0.3.106-3.2 (i386) << both ARCH's are required. See previous item.

sysstat-7.0.2-1 (x86_64)

unixODBC-2.2.12 (x86_64) << both ARCH's are required. See next item and Note:762206.1

unixODBC-2.2.12 (i386) << both ARCH's are required. See previous item and Note:762206.1

unixODBC-devel-2.2.12 (x86_64) << both ARCH's are required. See next item and Note:762206.1

unixODBC-devel-2.2.12 (i386) << both ARCH's are required. See previous item and Note:762206.1
NOTE: If you download unixODBC from ftp://ftp.unixodbc.org/pub/unixODBC/ then the header and library files are distributed together in one gzipped tar file.

RHEL4,OEL4:

Refer to Note 880942.1

SLES10:-

Refer to Note 884435.1

SLES11 :-

Refer to Note 881044.1

Asianux 2.0

[Oracle, Red Hat] Enterprise Linux 4.0

(See Note 437123.1):
default RPMs (see Note 376183.1)
binutils-2.15.92.0.2
compat-libstdc++-33-3.2.3
compat-libstdc++-33-3.2.3 (32 bit)
elfutils-libelf-0.97
elfutils-libelf-devel-0.97
gcc-3.4.5
gcc-c++-3.4.5
glibc-2.3.4-2.19
glibc-2.3.4-2.19 (32 bit)
glibc-common-2.3.4
glibc-devel-2.3.4
glibc-devel-2.3.4 (32-bit)
libaio-0.3.105
libaio-0.3.105 (32 bit)
libaio-devel-0.3.105
libgcc-3.4.5
libgcc-3.4.5 (32-bit)
libstdc++-3.4.5
libstdc++-3.4.5 (32 bit)
libstdc++-devel 3.4.5
make-3.80
sysstat-5.0.5
Asianux Server 3

[Oracle, Red Hat] Enterprise Linux 5.0

(see Note 438766.1):

default RHEL5 RPMs (see Note 376183.1)
default OEL5 RPMs (see Note 401167.1)
binutils-2.17.50.0.6
compat-libstdc++-33-3.2.3
compat-libstdc++-33-3.2.3 (32 bit)
elfutils-libelf-0.125
elfutils-libelf-devel-0.125
gcc-4.1.1
gcc-c++-4.1.1
glibc-2.5-12
glibc-2.5-12 (32 bit)
glibc-common-2.5
glibc-devel-2.5
glibc-devel-2.5-12 (32 bit)
libaio-0.3.106
libaio-0.3.106 (32 bit)
libaio-devel-0.3.106
libgcc-4.1.1
libgcc-4.1.1 (32 bit)
libstdc++-4.1.1
libstdc++-4.1.1 (32 bit)
libstdc++-devel 4.1.1
make-3.81
sysstat-7.0.0
SuSE SLES 10

(see Note 457143.1):

default-RPMs (see NOTE 386391.1)
binutils-2.16.91.0.5
compat-libstdc++-5.0.7-22.2
gcc-4.1.0
gcc-c++-4.1.0
glibc-2.4-31.2
glibc-32bit-2.4-31.2 (32 bit)
glibc-devel-2.4
glibc-devel-32bit-2.4 (32 bit)
libaio-0.3.104
libaio-32bit-0.3.104 (32 bit)
libaio-devel-0.3.104
libelf-0.8.5
libgcc-4.1.0
libstdc++-4.1.0
libstdc++-devel-4.1.0
make-3.80
sysstat-6.0.2
Note: If you did not perform a default Linux installation, you intend to use LDAP, and you want to use the scripts odisrvreg, oidca, or schemasync, then install the Korn shell RPM for your Linux distribution.

SuSE SLES 11

(see Note 1081555.1)

Red Hat Enterprise Linux 3.0:

Refer to Note 353735.1
default RPMs (see Note 376183.1)
compat-db 4.0.14-5.1
compat-gcc-7.3-2.96.128 (32 bit)
compat-gcc-c++-7.3-2.96.128 (32 bit)
compat-libstdc++-7.3-2.96.128 (32 bit)
compat-libstdc++-devel-7.3-2.96.128 (32 bit)
control-center-2.2.0.1-13
gcc-3.2.3-47
gcc-c++-3.2.3-47
gdb-6.1post-1.20040607.52
glibc-2.3.2-95.30
glibc-common-2.3.2-95.30
glibc-devel-2.3.2-95.30
glibc-devel-2.3.2-95.20 (32 bit)
gnome-libs-1.4.1.2.90-34.2 (32 bit)
libaio-0.3.96-3
libaio-devel-0.3.96-3
libstdc++-3.2.3-47
libstdc++-devel-3.2.3-47
make-3.79.1-17
openmotif-2.2.3-3.RHEL3
sysstat-5.0.5-5.rhel3
setarch-1.3-1
[Red Hat,Oracle] Enterprise Linux 4.0:

Refer to Note 339510.1

default RPMs (see Note 376183.1)
binutils-2.15.92.0.2-13.0.0.0.2.x86_64Download here or you can install binutils-2.15.92.0.2-18.x86_64.rpm
from RHEL4 Update 3.
compat-db-4.1.25-9.x86_64.rpm
compat-gcc-32-c++ )see Note 430526.1)

Patch 5240469 to correct bad genoccish file
compat-libstdc++-33-3.2.3-47.3.x86_64.rpm
compat-libstdc++-33-3.2.3-47.3.i386.rpm
control-center-2.8.0-12.x86_64.rpm
gcc-3.4.3-47.x86_64.rpm
gcc-c++-3.4.3-47.x86_64.rpm
glibc-2.3.4-2.9.x86_64.rpm
glibc-2.3.4-2.9.i386.rpm
glibc-common-2.3.4-2.9.x86_64.rpm
glibc-devel-2.3.4-2.9.x86_64.rpm
glibc-devel-2.3.4-2.9.i386.rpm
glibc-headers-2.3.4-2.9.x86_64.rpm
glibc-kernheaders-2.4-9.1.87.x86_64.rpm
gnome-libs-1.4.1.2.90-44.1.x86_64
libaio-0.3.103-3.i386.rpm
libaio-0.3.103-3.x86_64.rpm
libgcc-3.4.3-9.EL4
libstdc++-3.4.3-22.1.x86_64
libstdc++-devel-3.4.3-22.1.x86_64
make-3.80-5.x86_64.rpm
pdksh-5.2.14-30.x86_64.rpm
sysstat-5.0.5-1.x86_64.rpm
util-linux-2.12a-16.EL4.23.x86_64 (for raw devices)
xorg-x11-deprecated-libs-6.8.1-23
xscreensaver-4.18-5.rhel4.2.x86_64.rpm
[Red Hat,Oracle] Enterprise Linux 5.0

Refer to Note 421308.1

Since RHEL5/OEL5 are not recognized by runInstaller do:

./runinstaller -ignoreSysPrereqs

default RHEL5 RPMs (see Note 376183.1)
default OEL5 RPMs (see Note 401167.1)
compat-gcc-34-3.4.6-4
compat-gcc-34-c++-3.4.6-4
compat-libstdc++-33-3.2.3-61.i386.rpm
compat-libstdc++-33-3.2.3-61.x86_64.rpm
gcc-c++-4.1.1-52.el5.x86_64.rpm and all its dependent packages.

The dependent packages are:

libstdc++-devel-4.1.1-52.el5.x86_64.rpm

glibc-headers-2.5-12.x86_64.rpm

glibc-devel-2.5-12.i386.rpm

glibc-devel-2.5-12.x86_64.rpm

libgomp-4.1.1-52.el5.x86_64.rpm

gcc-4.1.1-52.el5.x86_64.rpm
libXp-1.0.0-8.i386.rpm
sysstat-7.0.0-3.el5.x86_64.rpm
util-linux-2.13-0.44.el5.x86_64 (for raw devices)
SUSE Linux Enterprise Server 9:

Refer to Note 365607.1

default-RPMs (see NOTE 386391.1)
binutils-2.15.90.0.1.1-32.5
db1-1.85-85.1
gcc-3.3.3-43.24
gcc-c++-3.3.3-43.24
glibc-2.3.3-98.28
glibc-32bit-9-200506071326
glibc-devel-2.3.3-98-47
glibc-devel-32bit-9-200506062332
libaio-0.3.102.1.2
libaio-devel-0.3.102.1.2
gnome-libs-1.4.1.7-671.1
gnuplot-3.7.3-256.1 (sysstat required RPM)
libstdc++-3.3.3-43.24
libstdc++-devel-3.3.3-43.24
make-3.80-184.1
orbit-0.5.17-330.1 (gnome-libs required RPM)
plotutils-2.4.1-575.1 (sysstat required RPM)
pdksh-5.2.14-780.1
sysstat-5.0.1-35.1
XFree86-libs-4.3.99.902.43.48
SUSE Linux Enterprise Server 10:

Refer to Note 373681.1

Since SLES10 is not recognized by runInstaller do:

./runinstaller -ignoreSysPrereqs

default-RPMs (see NOTE 386391.1)
glibc-devel-2.4-31.2.x86_64.rpm
gcc-4.1.0-28.4.x86_64.rpm
libstdc++-devel-4.1.0-28.4.x86_64.rpm
gcc-c++-4.1.0-28.4.x86_64.rpm
glibc-devel-32bit-2.4-31.2.x86_64.rpm
libaio-devel-0.3.104-14.2.x86_64.rpm

SuSE Linux Enterprise Server 10 special instructions: 1. Execute runInstaller with the -ignoreSysPrereqs option.
SUSE Linux Enterprise Server 11:

Refer to Note:956194.1 for a list of required SLES11 packages

Since SLES11 is not recognized by runInstaller do:

./runinstaller -ignoreSysPrereqs

RHEL 3 (Update 2):

Refer to Note 351679.1
default-RPMs (see NOTE 376183.1)
make-3.79.1
gcc-3.2.3-34
glibc-2.3.2-95.20
glibc-devel-2.3.2-95.20
glibc-devel-2.3.2-95.20 (32 bit)
compat-db-4.0.14-5
compat-gcc-7.3-2.96.128 (32 bit)
compat-gcc-c++-7.3-2.96.128 (32 bit)
compat-libstdc++-7.3-2.96.128 (32 bit)
compat-libstdc++-devel-7.3-2.96.128 (32 bit)
gnome-libs-1.4.1.2.90-34.1 (32 bit)
openmotif21-2.1.30-8 (32 bit)
setarch-1.3-1
libaio-0.3.96-3
libaio-devel-0.3.96-3
XFree86-libs-4.3.0-62 (32bit)
RHEL 4:

Refer to Note 390900.1 Requires My Oracle Support (MOS) patch 5201236Bug
4387087

default-RPMs (see NOTE 376183.1)
glibc-kernheaders-2.4-9.1.87 (x86_64)
glibc-headers-2.3.4-2.9 (x86_64)
glibc-devel-2.3.4-2.9 (x86_64)
glibc-devel-2.3.4-2.9 (i386)
libstdc++-devel-3.4.3-22.1 (x86_64)
gcc-3.4.3-22.1 (x86_64)
gcc-c++-3.4.3-22.1 (x86_64)
sysstat-5.0.5-1 (x86_64)

Note:

openmotif21-2.1.30-11.RHEL4.2 is required to install Oracle demos.

GNU Compiler Collection (GCC) 2.96 is not supported on Red Hat Enterprise Linux 4.0.

Gcc 3.2.3 is required for OCCI application

SuSE SLES8 (Service Pack 3 or later):

make-3.79.1
gcc-3.3.3-43
gcc-c++-3.3.3-43
glibc-2.2.5-213
glibc-32bit-8.1-9
glibc-devel-32bit-8.1-9
openmotif-2.2.2-124
libaio-0.3.96-3
libaio-devel-0.3.96-3
SuSE SLES9:

gcc-3.3.3-43
gcc-c++-3.3.3-43
glibc-2.3.3-98
glibc-32bit-9 (Bug 4405422)
glibc-devel-32bit-9 (Bug 4405422)
libaio-0.3.98-18
libaio-devel-0.3.98-18
make-3.80
openmotif-libs-2.2.2-519.1

RHEL ES/AS 3

Please refer to Note: 308588.1LD_ASSUME_KERNEL=2.4.19
glibc 2.3.2-95.x86_64
gcc-3.2.3-24.x86_64
gcc-c++-3.2.3-24.x86_64
libstdc++-3.2.3-24.i386
libstdc++-devel-3.2.3-24.x86_64
libstdc++-3.2.3-24.x86_64
glibc-devel-2.3.2-95.3.i386 (Foot 1)
glibc-2.3.2-95.6.i686
make 3.79.1.x86_64
gnome-libs-1.4.1.2.90-34.1.i386 (Foot 2)
ORBit-0.5.17-10.4.i386
audiofile-0.2.3-7.1.i386
esound-0.2.28-5.1.i386
gtk+-1.2.10-27.1.i386
imlib-1.9.13-12.i386
libpng10-1.0.13-8.i386
libungif-4.1.0-15.i386
tcp_wrappers-7.6-34.i386
setarch-1.3-1.x86_64
libaio-0.3.96-3.x86_64

Note:The x86_64 rpms are on the RHEL 3 x86_64 distribution. The i386 rpms are on the RHEL 3 x86 distribution.
o Footnote 1

This package might require the --force option during installation.

o Footnote 2

This package might require the --force option during installation if 64-bit gnome packages are installed. Oracle recommends that you do not install 64-bit gnome packages if they are not required for other applications.

RHEL ES/AS 4

Please refer to Note: 353529.1

a "default-RPMs" installation of RHEL AS/ES 4 update 1. Additional RPMs may be needed if a "less-than-default-RPMs" installation of RHEL AS/ES 4 update 1 is performed.
compat-gcc-32-3.2.3-47.3.x86_64.rpm
compat-gcc-32-c++-3.2.3-47.3.x86_64.rpm
glibc-kernheaders-2.4-9.1.87.x86_64.rpm
glibc-headers-2.3.4-2.9.x86_64.rpm
glibc-devel-2.3.4-2.9.x86_64.rpm
libstdc++-devel-3.4.3-22.1.x86_64.rpm
glibc-devel-2.3.4-2.9.i386.rpm
libaio-0.3.103-3.x86_64.rpm
ORBit-0.5.17-14.i386.rpm
gnome-libs-1.4.1.2.90-44.1.i386.rpm

The x86_64 packages are on the Red Hat Enterprise Linux 4 x86-64 distribution.

The i386 packages are also on the Red Hat Enterprise Linux 4 x86-64 distribution.
SuSE SLES8 (Service Pack 3 or higher)

glibc-2.2.5-213.x86_64
glibc-32bit-8.1-9.i586
glibc-devel-32bit-8.1-9.i586
gcc-33-3.3-43.x86_64
gcc-33-c++3.3-43.x86_64
libstdc++-33-3.3-43.x86_64
libstdc++-devel-33-3.3-43.x86_64
make-3.79.1-42.x86_64
libaio-0.3.15-138.x86_64 (This version of libaio is required for asynchronous I/O.)

Note: Create a symbolic link such that /usr/bin/gcc points to /opt/gcc33/bin/gcc. Otherwise the installation fails with relinking errors.
SuSE SLES9

Please refer to Note: 361169.1

Set LD_ASSUME_KERNEL=2.4.20

compat-2004.7.1-1.2
compat-32bit-9-200407011229
XFree86-libs-4.3.99.902-43.22
XFree86-libs-32bit-9-200407011229
libaio-devel-0.3.98-18.4
libaio-32bit-9-200407011229
libaio-0.3.98-18.4
libaio-devel-32bit-9-200407011229
glibc-32bit-9-200506071326
glibc-devel-32bit-9-200506071326 orarun-1.8-31

Linux x86_64 EM64T AMD64 Kernel Settings

kernel.shmmni = 4096

kernel.sem = 250 32000 100 128

fs.file-max = 6815744 512 x processes (for example 6815744 for 13312 processes_

net.ipv4.ip_local_port_range = 9000 65500

net.core.rmem_default = 262144

net.core.rmem_max = 4194304

net.core.wmem_default = 262144

net.core.wmem_max = 1048576

kernel.shmall = physical RAM size / pagesize For most systems, this will be the value 2097152. See Note: 301830.1 for more information.

kernel.shmmax = RAM times 0.5 (or higher at customer's discretion - see Note:567506.1)

kernel.shmmni = 4096

kernel.sem = 250 32000 100 128

SEMMSL 250

SEMMNS 32000

SEMMNI 128

SEMOPM 100

SHMMAX RAM times 0.5 (Note 567506.1)

SHMMNI 4096

SHMALL = SHMMAX/pagesize (Note:301830.1)

FILE-MAX 6815744 512 * Processes

IP_LOCAL_PORT_RANGE 9000 65500

RMEM_DEFAULT 262144

RMEM_MAX 4194304

WMEM_DEFAULT 262144

WMEM_MAX 262144 1048576

NET.IPV4.TCP_RMEM (RMEM_DEFAULT) (RMEM_DEFAULT) (RMEM_MAX)

NET.IPV4.TCP_WMEM (WMEM_DEFAULT) (WMEM_DEFAULT) (WMEM_MAX)
To increase the shell limits:

1. Add the following lines in the /etc/security/limits.conf file:

oracle soft nproc 2047

oracle hard nproc 16384

oracle soft nofile 1024

oracle hard nofile 65536

2. Add the following line to the /etc/pam.d/login file, if it does not already exist:

session required /lib/security/pam_limits.so

session required pam_limits.so Note 437123.1

Lines from the Fix section of Note 301665.1

3. Depending on the oracle user's default shell, make the following changes to the default shell startup file:

For the Bourne, Bash, or Korn shell, add the following lines in the /etc/profile file (or the /etc/profile.local file on SUSE Linux Enterprise Server systems):

if [ $USER = "oracle" ]; then

if [ $SHELL = "/bin/ksh" ]; then

ulimit -p 16384

ulimit -n 65536

else

ulimit -u 16384 -n 65536

fi

fi

For the C shell, add the following lines in the /etc/csh.login file (or the /etc/csh.login.local file on SUSE Linux Enterprise Server systems):

if ( $USER == "oracle" ) then

limit maxproc 16384

limit descriptors 65536

endif

SEMMSL 250

SEMMNS 32000

SEMMNI 128

SEMOPM 100

SHMMAX RAM times 0.5 (note:567506.1)

SHMMNI 4096

SHMALL = SHMMAX/pagesize (note:301830.1)

FILE-MAX 65536

IP_LOCAL_PORT_RANGE 9000 65500

RMEM_DEFAULT 262144

RMEM_MAX 2097152

WMEM_DEFAULT 262144

WMEM_MAX 262144 1048576

NET.IPV4.TCP_RMEM (RMEM_DEFAULT) (RMEM_DEFAULT) (RMEM_MAX)

NET.IPV4.TCP_WMEM (WMEM_DEFAULT) (WMEM_DEFAULT) (WMEM_MAX)

SEMMSL 250

SEMMNS 32000

SEMMNI 128

SEMOPM 100

SEMVMX 32767

SHMMAX 2147483648

One-half the size of your system's physical memory. Check your system for additional restrictions.

SHMMNI 4096

SHMALL = SHMMAX/pagesize (note:301830.1)

FILE-MAX 65536

IP_LOCAL_PORT_RANGE 9000 65500

To use hugepages, or to accommodate the VLM window size on Red Hat Enterprise Linux 4.0, you must increase the default maximum size of the per-process locked memory. To increase the per-process maximum locked memory limit, add the following lines to the /etc/security/limits.conf
file, where oracle is the user that administers the database. Refer Note 361468.1:

oracle soft memlock 5243000

oracle hard memlock 5243000

Oracle Version

11.2

11.1

10.2

10.1

9.2.0

9.0.1

8.1.7

8.1.6

8.1.5

8.0.6

8.0.5

Linux Itanium OS

(See Note 225710.1 for supported kernels),(SeeNote 1130325.1for
Support Status-Oracle Database on Linux Itanium)and Note 265262.1 for "Things to know about Linux"

Not Available

o RHEL AS/ES 3.0 (Update 4 or higher)

2.4.21-20.EL

o RHEL AS/ES 4.0 (Update 1 or higher)

2.6.9-11.EL

o SuSE SLES9 (SP2 or higher)

2.6.5-199

o SuSE SLES-10

o RHEL 5.0 (Note 748378.1)

2.6.18-8 or higher

Note: for all Itanium systems using "Montecito" processors, refer tonote:400227.1 for special installation instructions

o RHEL AS/ES 2.1 (Update 6 or higher)

2.4.18-e52

o RHEL AS/ES 3.0 (Update 4 or higher)

2.4.21-27.EL

o RHEL AS/ES 4.0 (Update 1 or higher)

2.6.9-11.EL.smp

o Red Flag Advanced Server 4.0 for Itanium 2 (China and Hong Kong only)

o SuSE SLES8 (SP4 or later)

2.4.21-278

o SuSE SLES9 (SP1 or later)

2.6.5-7.139

Note: for all Itanium systems using "Montecito" processors, refer tonote:400227.1 for special installation instructions

o Red Hat Enterprise AS/ES 2.1

2.4.18-e.14

o Red Hat Enterprise AS/ES 3.0

o Red Hat Enterprise AS/ES 4.0

2.6.9-11

o SuSE SLES8

o SuSE SLES9

o United Linux 1.0

o Red Flag Advanced Server 4.0 for Itanium 2 (China and Hong Kong only)

2.4.18-e14.ia64.rpm

Note: for all Itanium systems using "Montecito" processors, refer tonote:400227.1 for special installation instructions

Linux Itanium Disk Space

Not Available

1.2G Database

1.5 to 3.5G Install

1.2G Database

1.5G Software

1G Companion

150M-650M Client

4.5G

Linux Itanium RAM

Not Available

1Gb

512Mb

256Mb(Client/Compan)

512Mb

Linux Itanium swap

Not Available

If RAM = 1024MB to 2048Mb

then 1.5 times RAM

elseif RAM > 2048MB and < 8192MB

then match RAM

else RAM > 8192MB

then .75 times RAM

1Gb or match RAM

512Mb(Client/Compan)

1Gb or match RAM

Linux Itanium tmp

Not Available

400Mb

Linux Itanium JDK & JRE

Not Available

JDK 1.4.2_08 is installed

JDK 1.4.2_02 is installed

o Sun JDK 1.4.1 is installed but is mandatory to patch it to 1.4.2

Linux Itanium Patches/

Packages

Not Available

Red Hat Enterprise Linux 3.0:
make-3.79.1-17
control-center-2.2.0.1-13
gcc-3.2.3-47
gcc-c++-3.2.3-47
gdb-6.1post-1.20040607.52
glibc-2.3.2-95.30
glibc-common-2.3.2-95.30
glibc-devel-2.3.2-95.30
glibc-devel-2.3.2-95.20 (32 bit)
compat-db-4.0.14-5.1
compat-gcc-7.3-2.96.128
compat-gcc-c++-7.3-2.96.128
compat-libstdc++-7.3-2.96.128
compat-libstdc++-devel-7.3-2.96.128
gnome-libs-1.4.1.2.90-34.2 (32 bit)
libstdc++-3.2.3-47
libstdc++-devel-3.2.3-47
openmotif-2.2.3-3.RHEL3
sysstat-5.0.5-5.rhel3
setarch-1.3-1
libaio-0.3.96-3
libaio-devel-0.3.96-3
Red Hat Enterprise Linux 4.0:

binutils-2.15.92.0.2-10.EL4
compat-db-4.1.25-9
control-center-2.8.0-12
gcc-3.2.3-47 (OCCI does not support 3.4.3)
gcc-c++-3.2.3-47 (OCCI does not support 3.4.3)
glibc-2.3.4-2
glibc-common-2.3.4-2
gnome-libs-1.4.1.2.90-44.1
libaio-0.3.102-1
libstdc++-3.4.3-9.EL4
libstdc++-devel-3.4.3-9.EL4
make-3.80-5
pdksh-5.2.14-30
sysstat-5.0.5-1
compat-libstdc++-33-3.2.3-47.3 Bug 4605635
SUSE Linux Enterprise Server 9:

gcc-3.3.3
gcc-c++-3.3.3
glibc-2.3.3
libaio-0.3.102-1.2ia64
libaio-devel-0.3.102-1.2ia64
make-3.80

RHEL ES/AS 2.1 (Update 6 or higher)
gcc-2.96-129.7.2
gcc-c++-2.96-129.7.2
glibc-2.2.4-32.18
libaio-0.3.92-1
libaio-devel-0.3.92-1
libstdc++-2.96-129.7.2
libstdc++-devel-2.96-129.7.2
make-3.79.1-8
openmotif-2.1.30
cfs-1.0.11 (mentioned in 10.1.0.4 Release Note but cannot find this rpm)
RHEL ES/AS 3 (Update 1 or higher)

binutils-2.14.90.0.4-35
compat-db-4.0.14-5
compat-gcc-7.3-2.96.128
compat-gcc-c++-7.3-2.96.128
compat-libstdc++-7.3-2.96.128
compat-libstdc++-devel-7.3-2.96.128
control-center-2.2.01-13
gcc-3.2.3-20
gcc-c++-3.2.3-20
glibc-2.3.2-95.3
gnome-libs-1.4.1.2.90-34.2
make-3.79-1.17
openmotif21-2.1.30-8.i386.rpm
setarch-1.3-1
RHEL ES/AS 4 (Update 1 or higher)

binutils-2.15.92.0.2-13
compat-db-4.1.25-9
control-center-2.8.0-12
gcc-3.4.3-22.1
gcc-c++-3.4.3-22.1
glibc-2.3.4-2.9
glibc-common-2.3.4-2.9
make-3.80-5

Note: openmotif21-2.1.30-11.RHEL4.2 is required to install Oracle demos.

GNU Compiler Collection (GCC) 2.96 is not supported on Red Hat Enterprise Linux 4.0.

Gcc 3.2.3 is required for or OCCI application.
SUSE SLES8 (Service Pack 4 or higher)

gcc-3.2.2-54
glibc-2.2.5-230
make-3.79.1-328
openmotif-2.2.2-522
SUSE SLES9 (Service Pack 1 or higher)

binutils-2.15.90.0.1.1-32.5
gcc-3.3.3-43.28
gcc-c++-3.3.3-43.28
glibc-2.3.3-98.38
libaio-0.3.98-18.3
libaio-devel-0.3.98-18.3
make-3.80-184.1
openmotif-libs-2.2.2-519.4

All IA64 OS Versions - for Async I/O functionality to work you need to installPatch 3016968 on top of 9.2.0.4.0 or 9.2.0.5.0
RHEL ES/AS 2.1

glibc 2.2.4-29
gcc 2.96.0
Linux Header Patch 2.4.18 (available from Intel)
libaio-0.3.92-1
RHEL3

1. Put gcc296 and g++296 first in $PATH variable by creating the following symbolic links. These are required for the relinking of some Oracle binaries (as root)

# mv /usr/bin/gcc /usr/bin/gcc323

# mv /usr/bin/g++ /usr/bin/g++323

# ln -s /usr/bin/gcc296 /usr/bin/gcc

# ln -s /usr/bin/g++296 /usr/bin/g++

2. hostname command should return the fully qualified hostname as shown below:

- # hostname

- hostname.domainname

3. If any Java packages are installed on the system, unset the Java environment variables, for example JAVA_HOME.

4. Define and export the environment variable LD_ASSUME_KERNEL before starting the install process:

- $ export LD_ASSUME_KERNEL=2.4.19

5. Relink error for ins_oemagent.mk - Click ignore and complete the install. Apply thepatch 3119415

6. Apply 9.2.0.4 patchset (patch 3095277) for Linux Itanium in order to be certified and supported.

RHEL4

9.2.0.7 patchset is required minimum patchset

binutils-2.15.92.0.2-13
compat-db-4.1.25-9
control-center-2.8.0-12
gcc-3.4.3-22.1
gcc-c++-3.4.3-22.1
glibc-2.3.4-2.9
glibc-common-2.3.4-2.9
make-3.80-5

Define and export the environment variable LD_ASSUME_KERNEL before starting the install process:

- $ export LD_ASSUME_KERNEL=2.4.19
SuSE SLES9

The following requirements are needed for a successful installation of Oracle 9iR2 Linux Itanium on SuSE SLES9:

1. Apply 9.2.0.5 patchset (patch 3501955).

2. After installing 9.2.0.5 patchset you must install patch 4566648 to fix the following 2 issues

4566551: BACKING STORE (BSP) NEEDS PROPER ALIGNING FOR SLES9

4566614: BSP(BACKING STORE) VALUE SHOULD BE CHECKED BEFORE COPYING THE MEMORY SEGMENT

3. There is a known issue, where creation of JavaVM fails during custom DB creation. Please use the workaround described as follows in case of custom Database creation.

Remove the following eight shared libraries from $ORACLE_HOME/javavm/admin/ and restore them else where before starting database creation.

libjox9oracle_aurora_ncomp_java.so

libjox9oracle_aurora_server_tools_loadjava.so

libjox9oracle_aurora_sqljdecl.so

libjox9oracle_net_nt.so

libjox9oracle_security_jwallet.so

libjox9oracle_sql.so

libjox9org_omg_CORBA_2_3_portable.so

libjox9sun_security_action.so

Linux Itanium Kernel Settings

Not Available

SEMMSL 250

SEMMNS 32000

SEMMNI 128

SEMOPM 100

SHMMAX RAM times 0.5 (Note 567506.1)

SHMMNI 4096

SHMALL = SHMMAX/pagesize (note:301830.1)

FILE-MAX 65536

IP_LOCAL_PORT_RANGE 9000 65500

RMEM_DEFAULT 262144

RMEM_MAX 2097152

WMEM_DEFAULT 262144

WMEM_MAX 262144 WMEM_MAX 262144

NET.IPV4.TCP_RMEM (RMEM_DEFAULT) (RMEM_DEFAULT) (RMEM_MAX)

NET.IPV4.TCP_WMEM (WMEM_DEFAULT) (WMEM_DEFAULT) (WMEM_MAX)

Oracle Version

11.2

11.1

10.2

10.1

Linux on 64-bit zSeries

Note:1306889.1 Requirements for Installing Oracle 11gR2 on RHEL 5

Note:1290644.1 Requirements for Installing Oracle 11gR2 64-bit on SLES 11

Note:1308859.1 Requirements for Installing Oracle 11gR2 on SLES 10

Not available

Note:415182.1 DB Install Requirements Quick Reference - zSeries based Linux

Oracle Version

11.2

11.1

10.2

10.1

9.2.0

9.0.1

8.1.7

8.1.6

8.1.5

8.0.6

8.0.5

Linux on Power PC OS

(See Note 225710.1 for supported kernels) andNote 265262.1for "Things
to know about Linux"

Not Available

o Red Hat Enterprise Linux AS/ES 5.0 (Update 1 or later)

2.6.18-53.el5

o Red Hat Enterprise Linux AS/ES 4.0 (Update 1 or later)

2.6.9-11.EL

o SUSE Linux Enterprise Server 9.0

2.6.5-7.191-pseries64

o SUSE Linux Enterprise Server 10.0

o Asianux 2.0
See Note:341507.1 for further information

Linux on Power PC Disk Space

Not Available

1.2G Database

1.5 to 3.5G Install

Linux on Power PC RAM

Not Available

1Gb

Linux on Power PC swap

Not Available

If RAM = 1024MB to 2048Mb

then 1.5 times RAM

elseif RAM > 2048MB and < 8192MB

then match RAM

else RAM > 8192MB

then .75 times RAM

Linux on Power PC tmp

Not Available

400Mb

Linux on Power PC JDK & JRE

Not Available

JDK 1.4.2_08 is installed

Linux on Power PC Patches/

Packages

Not Available

Please refer to Note: 341507.1
Red Hat Enterprise Linux 4.0:

binutils-2.15.92.0.2-13
compat-libstdc++-33-3.2.3-47.3 (ppc64)
compat-libstdc++-33-3.2.3-47.3 (ppc)

Fix for: /usr/lib/libstdc++.so.5: No such file or directory (per Rel Notes)

java.lang.ExceptionInInitializerError using OUI Note 427754.1
gcc-3.4.3-22.1 (ppc)
gcc-ppc32-3.4.3-22.1 (ppc)
gcc-c++-3.4.3-22.1 (ppc)
gcc-c++-ppc32-3.4.3-22.1 (ppc)
glibc-2.3.4-2.9 (ppc64)
glibc-2.3.4-2.9 (ppc)
glibc-devel-2.3.4-2.9 (ppc)
glibc-devel-2.3.4-2.9 (ppc64)
libaio-0.3.103-3 (ppc)
libaio-0.3.103-3 (ppc64)
libaio-devel-0.3.103-3 (ppc)
libgcc-3.4.3-22.1 (ppc)
libgcc-3.4.3-22.1 (ppc64)
libstdc++-3.4.3-22.1 (ppc)
libstdc++-devel-3.4.3-22.1 (ppc64)
make-3.80-5 (ppc)
SUSE Linux Enterprise Server 9:

gcc-3.3.3-43.34
gcc-64bit-9-200505240008
gcc-c++-3.3.3-43.34
glibc-2.3.3-98.47
glibc-64bit-9-200506062240
libgcc-3.3.3-43.34
libgcc-64-bit-9-200505240008
libstdc++-3.3.3-43.34
libstdc++-devel-3.3.3-43.34
libaio-0.3.102-1.2
libaio-64bit-9-200502241152
libaio-devel-0.3.102-1.2
libaio-devel-64bit-9-200502
make-3.80-184.1
binutils-2.15.90.0.1.1-32.10
binutils-64bit-9-200505240008
An error is generated while installing Oracle Database 10.2.0.1 on Red Hat Enterprise Linux 4.0 Update 2 or later and SUSE Linux Enterprise Server 9 withservice pack 2 or later. Most of the times, the error is generated when you perform any of the following
tasks:

While installing Oracle Database 10.2.0.1 after a fresh and complete installation of Red Hat Enterprise Linux 4.0 Update 2
While installing Oracle Database 10.2.0.1 after a fresh and complete installation of SUSE Linux Enterprise Server 9 with service pack 2 or later
When you start dbca or netca from the command line or Oracle Universal Installer, if Standard installation is selected

Workaround: Before installing Oracle Database 10g release 2, verify the contents of the /etc/resolv.conf file. Edit the file to make the following change:

Change the line similar to:

domain=my.net.com

To:

search=my.net.com

The original /etc/resolve.conf file can be restored after the database installation is complete.
You must install the IBM XL C/C++ Advanced Edition V7.0 for Linux Runtime Environment Component and XL Optimization Libraries component from the following link: IBM
link This URL contains information and installation instructions. All the above installations must to be done before installing Oracle database. On SUSE Linux Enterprise Server 9, install the following components:

The RTE component: vacpp.rte.70.sles9.jan2006.update.tar.gz
The XL Optimization Libraries: vac.lib.70.sles9.tar

On Red Hat Enterprise Linux 4, install the following components:
The RTE component: vacpp.rte.70.rhel4.dec2005.update.tar.gz
The XL Optimization Libraries: vac.lib.70.rhel4.tar
Relink of 10.2 fails in Linux on Power After upgrade to RHEL U2. Apply Patch 4767801

Linux on Power PC Kernel Settings

Not Available

Oracle Version

11.2

11.1

10.2

10.1

Mac OS X

Not Available

Mac OS X Server 10.5.4 (Intel x86-64)
Note: Only 10.2.0.4 is available and certified only on Mac OS X Server 10.5.4 (Intel x86-64)

See the 10.2 Install Guide for MAC OS X (Intel)

Mac OS X Server 10.4(PowerPC)

Mac OS X Server 10.3.9(PowerPC)

Mac OS X Server 10.3.6(PowerPC)

Mac OS X Disk Space

Not Available

1.2GB (optional pre-configured database)

1.5GB to 3.5GB (software, depending on installation type)

1.2G Database

1G Software

1G Companion

150M-1G Client

Mac OS X RAM

Not Available

1GB or more

512Mb

256Mb(Client/Compan)

Mac OS X swap

Not Available

Equal to RAM (or more)

1Gb or match RAM

512Mb(Client/Compan)

Mac OS X tmp

Not Available

400Mb

Mac OS X JDK

Not Available

JDK 1.4.2_16 or higher

JDK 1.4.2_05 needs to be already installed

Do this command to verify:

$ /Library/Java/Home/bin/java -version

Mac OS X Patches/

Packages

Not Available

Xcode 3.0 or later
GNU C compiler (gcc) version 4.0.1 or later (this version of gcc is included in Xcode 3.0 or later)

JDK 1.4.2_16 or higher (with the JNDI extension if you want to use the Oracle JDBC/OCI drivers)

Required Packages:
Xcode Tools 1.1 or higher
GNU C compiler (gcc) version 3.3 20030304 (Apple Computer, Inc. build 1635) *This version of gcc is included in Xcode Tools 1.2 or higher or in the Dec 2003 gccLongBranch Tools update.
X11 for Mac OS X and X11 SDK for Mac OS X (Spatial only)
OpenMotif 2.2.3 or higher (Spatial only)

Mac OS X Kernel Settings

Not Available

Following are the recommended kernel parameters:

kern.sysv.semmsl 87381

kern.sysv.semmns 87381

kern.sysv.semmni 87381

kern.sysv.semmnu 87381

kern.sysv.semume 10

kern.sysv.shmall 2097152

kern.sysv.shmmax Half the size of physical memory (in bytes)

kern.sysv.shmmni 4096

kern.maxfiles 65536

kern.maxfilesperproc 65536

net.inet.ip.portrange.first 1024

net.inet.ip.portrange.last 65000

kern.corefile core

kern.maxproc 2068

kern.maxprocperuid 2068
To improve the performance of the software on Mac OS X systems, you must increase the following shell limits:

Maximum number of open file descriptors 65536

Maximum number of processes available to a single user 2068

To increase the shell limits:

1. Change directory to the following directory:

% cd /System/Library/StartupItems/IPServices

2. Open the IPServices script using any text editor.

3. Add the following ulimit commands to the start of the StartService function in this script:

ulimit -Hu 2068

ulimit -Su 2068

ulimit -Hn 65536

ulimit -Sn 65536

4. Add the same ulimit commands to the /etc/rc script, before the SystemStarter command.

Note: If you need Mac OS X Server 10.3.6, please go to here:

Apple URL

To obtain the latest update for Mac OS X Server 10.3.6, please go to:

Latest Update

To obtain Mac OS X Server 10.3.9 and the software update, send an email message to oracle_update_request@iservices.apple.com . You will receive an automatic response that contains links to the required patch and to the Mac OS X Server 10.3.9 installation
software.

Note: You do not need to include a message or title with the email.

To install Oracle 10.1.0.5 on MACOSX 10.4 (Tiger OS) PowerPC based systems :

Install Oracle Database 10.1.0.3 - software only. Please do not create the database.

Perform a software upgrade from 10.1.0.3 to 10.1.0.5. Invoke OUI from 10.1.0.5 and choose software upgrade only.

After 10.1.0.5 software upgrade, create database using the Database Configuration Assistant (DBCA)". DBCA is found under $ORACLE_HOME/bin . Just Invoke this executable and choose create database option.

Following are the recommended kernel parameters:

kern.corefile core

kern.sysv.semmni 87381

kern.sysv.semmns 87381

kern.sysv.semmnu 87381

kern.sysv.semmsl 87381

kern.sysv.semume 10

kern.sysv.maxproc 2068

kern.sysv.maxprocperuid 2068

To improve the performance of the software on Mac OS X systems, you must increase the following shell limits:

Shell Limit / Hard Limit

Maximum number of open file descriptors 65536

Maximum number of processes available to a single user 2068

To increase the shell limits:

Change directory to the following directory:

# cd /System/Library/StartupItems/IPServices

Open the IPServices script using any text editor.

Add the following ulimit commands to the start of the StartService function in this script:

ulimit -Hu 2068

ulimit -Su 2068

ulimit -Hn 65536

ulimit -Sn 65536

Add the same ulimit commands to the /etc/rc script, before the SystemStarter command.

Oracle Version

11.2

11.1

10.2

10.1

9.2.0

9.0.1

8.1.7

8.1.6

8.1.5

8.0.6

8.0.5

RELATED DOCUMENTS

---------------------------------------

8.0.5 to 10g Installation Guides (for AIX, HP, Sun, Tru64, Linux, MacOSX)

http://otn.oracle.com/documentation/content.html

Note 43507.1 ALERT:HP-UX: Patch Levels Advised

Note 169426.1 How to change kernel mode of IBM AIX 5L (5.1)

Note 17094.1 TECH: Unix Virtual Memory, Paging & Swapping explained

Note 189256.1UNIX: Script to Verify Installation Requirements for Oracle 9.x version of RDBMS

Note 250262.1RDA 4 - Health Check / Validation Engine Guide

Note 314422.1Remote Diagnostic Agent (RDA) 4 - Getting Started

Note 1156586.1Master Note For Oracle Database Installation

Note 1154613.1Master Note For Cloning Oracle Database Server ORACLE_HOME's Using the Oracle Universal Installer (OUI)

Note 1152016.1Master Note For Oracle Database Upgrades and Migrations

Note 1151427.1Master Note For Oracle Database Downgrade

Note 1157464.1Master Note on Oracle Universal Installer (OUI) for installing Oracle Database Software

Note 1157463.1Master Note For Oracle Database Client Installation

Note 293369.1Master Note For OPatch

Note 851598.1Master Note of Linux OS Requirements for Database Server

OS SPECIFIC COMMANDS

-----------------------------------------

To Find Swap, RAM, and OS Version

OS	SWAP	RAM	OS VERSION
AIX	/usr/sbin/lsps -a	/usr/sbin/lsattr -HE -l sys0 -a realmem	oslevel
HP PA-RISC	swapinfo -a	grep "Physical:" /var/adm/syslog/syslog.log	uname -a
HP Itanium	swapinfo -a	/usr/contrib/bin/machinfo \| grep -i Memory	uname -a
Tru64	swapon -s	vmstat -P	/usr/sbin/sizer -v
Solaris	swap -l	/usr/sbin/prtconf \| grep -i memory	uname -r
Linux	free	free	uname -a
Mac OS X	# df -h /	# /usr/sbin/system_profiler SPHardwareDataType \| grep Memory	# sw_vers

To Determine the Unix Kernel Parameters

OS	LOCATION	COMMAND TO SEARCH
AIX	automatically configured	do 'env' for LINK_CNTRL, To determine if AIX is 64 bit enabled do 'genkex \| grep 64' or 'genkex \| grep call' (seeNote 1019106.102)
HP	/stand/system or use SAM -->Kernel Configuration	/etc/sysdef, /usr/sbin/kmtune (kmtune desupported in 11.31, use /usr/sbin/kctune -v), or /usr/sbin/kcweb -F
Tru64	/etc/sysconfigtab	/sbin/sysconfig -q ipc or /sbin/sysconfig -q vm or /sbin/sysconfig -q proc
Solaris	/etc/system	"/etc/sysdef \| grep SHM" or "/etc/sysdef \| grep SEM"
Linux	/usr/src/linux/include/asm/shmparam.h /usr/src/linux/include/linux/sem.h /proc/sys/kernel/sem /proc/sys/kernel/shmall /proc/sys/kernel/shmmax /proc/sys/kernel/shmmni	ipcs -lms
Mac OS X	/etc/sysctl.conf	"# /usr/sbin/sysctl -a \| grep "

O/S Software Installed Packages and Patches

OS	COMMAND FOR PACKAGES	COMMAND FOR PATCHES
AIX	lslpp -w \| grep -i "software title" (applies to APARs and PTFs)	/usr/sbin/instfix -ik patch number
HP	Prior to 11: /usr/sbin/swlist -lproduct PH\* hp-ux 11 and after: * /usr/sbin/swlist -l patch \\.,c=patch * /usr/contrib/bin/show_patches (from patch PHCO_19550)	/usr/sbin/swlist -l fileset \| grep -i
Solaris	/bin/pkginfo -l \| grep -i "software title"	/bin/showrev -p
Tru64	/usr/sbin/setld -i \| grep -i "software title"	/usr/sbin/setld -i \| more For patchkits: /usr/sbin/dupatch -track -type kit
Linux	To see if a particular RPM is installed (without the architectur): $ rpm -qa \| grep "package name" To see if a particular RPM is installed (with the architectur): $ rpm -qa --qf "%{NAME}-%{VERSION}-%{RELEASE}_%{ARCH}\\n" \| grep "package name" To see what RPM provided a particular object/library: $ rpm -q --whatprovides --qf "%{NAME}-%{VERSION}-%{RELEASE}_%{ARCH}\\n" "full path/library name" To see the contents listing of an RPM: $ rpm -ql "RPM name" For example: $ rpm -ql compat-libstdc++-33-3.2.3-47.3.ppc /usr/lib/libstdc++.so.5 /usr/lib/libstdc++.so.5.0.7
Mac OS X	to be supplied later	to be supplied later

To Check if an OS is 64 bit Capable or not

OS	COMMAND	RESULTS
Aix	lslpp -L \| grep 64bit	It should return "bos.64bit"
HP	getconf KERNEL_BITS	It should return "64"
Solaris	/bin/isainfo -kv	If the isainfo command does not exist it is not 64-bit. It should return "64-bit sparcv9 kernel modules"

To Check version of Compiler

COMPILER	COMMAND
C/C++	do a "which cc", then cd to the directory it is in, then do a "what cc" except for Linux, on Linux do a "rpm -qa \| grep egcs
COBOL	cd $COBDIR and do "more cobver"
Fortran	do a "which f77", then cd to directory it is in, then do a "what f77"

CHANGE HISTORY

===============
111704

- HP section - HP Doc BUG ID: KBRC00003627is not applicable to 11.22 and 11.23

- TRU64 section - Added OSFX11 as required package for 10g and 9.2
120404

- Linux section - Added Asianux and Red Flag requirements, Updated certified OS's and their kernel versions and the required OS packages for each OS
121204

- Linux section - Added reference to Note 252217.1 for additional setup requirements for RHEL3 and 9.2 x86

-- Added additional steps for SLES9 for 9.2 32bit x86
121904

- Linux section - Updated Linux Itanium 10g on SuSE SLES9 required RPMs
122604

- Linux section - Added LD_ASSUME_KERNEL=2.4.19 to 10g RHEL3 section
122704

- MacOSX section was added
010205

- Linux section - 10g SuSE SLES9 references to gcc-3.3-43 and gcc-c++-3.3-43 were corrected to gcc-3.3.3-43 and gcc-c++-3.3.3-43
011005

- Linux section - Added reference to Note 265262.1 for "Things to know about Linux"
012905

- General section - Removed reference to the HCVE script for Linux 64 and added references to newly created Linux IA64 and Linux AMD64.

-- Added reference to newly created Mac OSX HCVE script
020505

- HPUX section - Added 11.23 (PA-RISC) (64bit) to 10g and 9.2 as a certified OS

- Sun section - Added SUNWuiu8,SUNWulcf (if Bug 4025250 occurs) to 10g OS packages
022505

- AIX section - Added AIX_THREAD_SCOPE=S to 9.2

- TRU64 section - Added VM_BIGPG_ENABLED 0 to 10g and 9.2 kernel settings

- General section end of Note - Updated the swlist commands for checking HP OS patches and packages
022805

- HPUX section - For 10g and 9.2 added/update that MAXSWAPCHUNKS, SEMMAP, and VX_NCSIZE are obsolete on 11.23 PA-RISC and IPF and no longer need to be set also to now set NCSIZE = (NINODE+1024)
031805

- HPUX section - Update 10g 11.11 OS patches that PHNE_28476 is superseded by PHNE_29825, PHCO_26331 s/b PHCO_27958, PHKL_26468 s/b PHKL_27316
040905

- TRU64 section - Removed 5.1 as being certified with 9.2, updated that 5.1a requires PK6 now versus PK3 and updated that 5.1b requires PK4 now versus PK2

-- Also added require patches for each newly required patchkit

-- Modified the new_wire_method to indicate thatif you are at 5.1a PK6 it should be set to 1
041005

- Sun section - Added Solaris 10 as now certified with 10g and 9.2 and special instructions

- Linux section - Added RHEL4 as now certified and its needed environment settings and rpms
041605

- General section - Added Change History
042305

- Linux section - 9.2 x86 for SuSE9 added needed patch 3809563 if applying 9.2.0.5 patchset

-- Clarified that patch 4190568 needs to be applied on top of 9.2.0.6 patchset

-- Added Async IO patch 3016968/patch
3208258 in 9.2 x86 section

-- Added Async IO patch 3016968 in 9.2 IA64 section
042505

- Tru64 section - 817 column changed vm-mapentries that it applies to OS versions below 5.0, starting in 5.0 it is autoset
043005

- AIX section - Kernel Settings, clarified that AIXTHREAD_SCOPE is an environmental setting not a kernel setting
052205

- Linux section - 10g x86_64 for SuSE SLES9 added glibc-32bit-8.1-9 and glibc-devel-32bit-8.1-9 as required packages per <>

- Sun section - made SUNWmfrun a mandatory patch for 10g and 9.2 per <>

-- Updated Kernel settings for Solaris 10 because most are obsoleted
060305

- Linux section - Corrected the 9.2 section that patch 3016968 and patch
3208258 are specific to RHEL3 and not all x86 OSs
070305

- OS Specific Commands section - O/S Software Installed Packages and Patches Linux section - Added RPM commands to list an RPMs contents and query RPMs to see which one provides a specific object library
072205

- Linux section - 9.2 Linux Itanium Added RHEL3 requirements

- Linux section - 10g IBM zSeries SuSE SLES9 added libc6.2-2.so.3 32bit as a requirement per <>
072305

- Linux section - Added 10.2 Linux x86 requirements

- HPUX section - updated 9.2 11.0 patch section with new superseded patches
082205

- Sun section - Modified the Solaris 10 special instructions per <>

- TRU64 section - corrected value of SHM_MIN to be 1 instead of 1024 in the 9.2 section per <>
082905

- AIX section - Added 10gR2 requirements, presently OTN states to use 10gR1 requirements

- HP section - Added 10gR2 requirements, presently OTN states to use 10gR1 requirements

- Added note to ensure that unzip 5.5 or later is being used in the 10g and 9.2 section per <>

- Sun section - Added 10gR2 requirements, presently OTN states to use 10gR1 requirements
091705

- Sun section - Updated 10gR2 requirements since the Installation Guide is now available
091805

- AIX section - Updated 10gR2 requirements since the Installation Guide is now available

- HPUX section - Updated 10gR2 requirements since the Installation Guide is now available

- Linux section - Updated 10gR2 requirements since a new Release Note has the correct RPMs for RHEL4 and SuSE9
092605

- Pre-Installation Scripts - Added new heading

- Added 10gR2 Pre_Installation Script Notes
100405

- HPUX section - Added comment to 9.2 NCALLOUT is obsolete in 11.23

- Sun section - added SUNWuiu8, SUNWulcf as required to 9.2
100705

- AIX section - Added APAR IY68989 to 10gR2 AIX 5.3 per Release Note

- Related Documents - added 10gR2 Pre-Installation scripts
101005

- Linux section - Added Note 303859.1 for 9206 on RHEL4

- Added Patch 3208258 as neeeded for AIO on SLES9
101905

- Linux section - Added RHEL4 for 10gR1 x86_64 requirements now that it is certified
110705

- Linux section - Added 10gR2 x86_64 requirements now that it is certified

- Added glibc-devel rpm as required for 9.2 x86 on RHEL3

- Added xFree86-libs as required to 10gR1 x86_64 for RHEL4 (Bug 4387087)

- Added glibc-devel-32bit-9 to 10gR1 x86_64 for SuSE SLES9 (Bug 4405422)

- Added to 9.2 IA64 the SuSE SLES9 is now certified

- Added to 10gR2 on RHEL3 that it requires Update 4

- HPUX section - Added supecedes of patches for 10gR1 on 11.11
111105

- entire document - made all patches/bugs hyperlinks, removed double entry of compat-db in RHEL3 for 10gR2 X86_64
111805

- Linux section - Added needed RPMs and reference to Ivan Kartik document for install of 9.2 on SuSE SLES 9
120805

- Linux section - Added RHEL4 to 10gR1 Linux IA64 as certified - Added Linux on Power PC requirements
121105

- HPUX section - Updated the 9.2 11.11 patch list

- Sun section - Updated special instructions for Solaris 10 and 10gR1
121805

- Linux section - Added 10gr2 on Linux IA64
010606

- Linux section - Added compat-libstdc++-296-2.96-132.7.2 (i386) to 10gR1 Linux x86 for RHEL4

- Added RHEL4 for 9.2 x86_64 as certified

- Sun section - modified noexec_user_stack is not obsolete to Solaris 9, it is actually still valid for Solaris 9 and 10
012706

- Pre-Installation Scripts - Added 10gR2 Linux AMD64/EM64 script

- Linux section - Changed 10gR2 Linux x86_64 for RHEL3 to show the compat-gcc, compat-gcc-c++, compat-libstdc++, and compat-libstdc++-devel as 32bit RPMs not 64bit RPMs

- Added glibc-32bit, glibc-devel-32bit, libaio, libaio-devel to 10gR2 Linux x86_64 for SLES9
021106

- Linux section - corrections to 10gR2 Linux on PPC - RHEL4 and SLES9 RPMs

- Added reference to Note:353529.1 and added the suggested RHEL4 RPMs for 9.2.0.7 on Linux x86_64

- Added XFree86-libs-4.3.0-78.EL.i386.rpm per Remark 56677.1

021306

-HP section - Added the new 10gR2 HPUX Itanium requirements

-Linux section - broke out the section into four sections - Linux x86, Linux x86_64, Linux Itanium, and Linux on Power PC for ease of reading
021506

-TRU64 section - Incorporated Remark 56834.1 and modified the 9.2 kernels related to "per_proc":ref: TRU64 Tuning Oracle
817 and higher and Note:201200.1

-Linux section - Incorporated Remark 56763.1 - Removed reference to xscreensaver-4.16-2.6 from 10gr2 x86 and x86_64 for SuSe SLES9
021706

-HPUX section - For 10.2 HPUX Itanium added OS patch requirements for ProC/C++/OCI/OCCI/XML
022406
-HPUX section - Added supercessions to 10gR2 HPUX PA-RISC and Itanium patches
022806

-Linux section - Added libaio-0.3.96 to 10gR2 X86
030606

-Linux section - Changed the kernel version for 10gR2 on Linux Itanium for SuSE SLES9 from 2.6.5-7.139 to 2.6.5-7.199 which is what SP2 is.
031006

-Linux section - Added compat-libstdc++-33-3.2.3-47.3 to 10.2 RHEL4 Linux x86 per Remark:57408.1

- modified gcc and g++ RPM versions for 10.2 on RHEL4 Linux x86_64 to be 3.4.3-9.1 instead of 3.4.3-9.EL4

-Sun section - Added SUNWxcu4 per Remark 57401.1
031306

-Linux section - corrected 9.2 x86_64 SuSE SLES9 details as they were referencing x86 requirements by mistake, changed note reference from Ivan Kartik's to Fabrizio Magni's
031606

-Linux section - changed 9.2 on x86 on RHEL4 to also be certified with 9.2.0.5 patchset and patch 4276910

-Sun section - changed 9.2 (32bit) on Solaris 10 to be certified on minimum 9.2.0.4 patchset instead of 9.2.0.6 and 9.2 (64bit) on Solaris 10 to be certified on minimum 9.2.0.5 instead of 9.2.0.6 per My Oracle Support (MOS) - Certification
031706

-HPUX section - updated the 10.1 version on HPUX 11.11 OS patches to reflect latest superseded versions.

-Linux section - changed 10.2 x86_64 on RHEL4 to add binutils-2.15.92.0.2-18.x86_64.rpm as another version of binutils that can be installed.
032506

-Linux section - updated Linux Itanium for 9.2 to add RHEL4 requirements (per Remark 57699.1)

-Mac OS X section - Added that 10.1.0.3 is now certified on 10.3.9 (per Remark 57702.1)

-Sun section - Added SUNWuiu and SUNWulcf to 10.2 on Solaris 8,9, and 10 (Per Remark 57701.1)

- Added that 10.2.0.2 is now certified on Solaris x86_64/AMD64
041806

-Linux section - 10.1 x86 on RHEL4 clarified the RPMs (Remarks 58081.1, , 58342.1, 58435.1)

- 9.2 x86_64 on SuSE 9, remove external reference, added LD_ASSUME_KERNEL=2.4.20 (Remark 58338.1)

- All references where SHMMNI was set lower then SHMSEG, the value of SHMMNI was set to match it (Remark 57854.1)

- 10.2 x86_64 on RHEL4 - Clarified architecture of RPMs and added RPMs as requested by T. Yoshimura and <>
041906

-Linux section - 10.1 x86_64 on RHEL3 added XFree86-libs (32bit) is required.
043006

-Linux section - 10.2 x86_64 on SLES9 changed glibc-32bit-8,glibc-devel-32bit-8 to -9
050706

-Sun section - Added 112963-25 as a required Solaris 9 OS patch (Bug 4712475) per R. Gulledge
051806

-Linux section - 9.2 x86_64 on RHEL3 added Note 308588.1 and LD_ASSUME_KERNEL=2.4.19

- 9.2 x86_64 on SLES9 added Note 361169.1 and glibc-32bit and glibc-devel-32bit
052406

-Sun section - 10.2 added Patch 4589082 as needed prior to install to deal with -ldce not found issue when linking proc
082806

-Linux section - Removed references to ORBit-0.5.17-14.i386.rpm and gnome-libs-1.4.1.2.90-44.1.i386.rpm fo3 10g2 on RHEL4 x86_64 as no valid reference can be found.
091806

-Linux section - 10.1 x86_64 on RHEL4 updated OS package requirements.
092206

-Linux section - 10.2 Itanium on RHEL4 added compat-libstdc++-33-3.2.3-47.3 to OS package requirements.
101706

-Linux section - 10.1 x86 on RHEL3 updated OS package requirements.
110706

-Tru64 section - Added the new 10gR2 Tru64 requirements
112806

-Linux section - 10.2 x86 on SLES9 updated OS requirements
121206

-Linux section - all versions and platforms - changed SHMALL to formula
121906

-Linux section - 10.2 x86_64 on SLES10 - added os version and package reqs
022707

-HP-UX section - 10.2, 11.11 required patches - added new superseded patch numbers
030607

-Added reference to note:400227.1 for all Itanium systems with "Montecito" processors
030607

-Added section/links for 64-bit Linux on zSeries
032007

-Added HP-UX Itanium 11.23 info for 9.2.0, 10.1.0, and 10.2.0
040407

-Aix section - Added APAR IY94343 - LV Block Corruption Note 422031.1 (per Remark 70417.1)
042507

-Sun section - Added Solaris 10 kernel parameters
052307

-AIX section - added reference to Note 282036.1 for AIX 5.3 and 5.2 patching requirements

-Linux section - modified that SHMMAX should not be set higher then 4Gb due to core dumping generation issues.
052507

-HPUX section - added to the 11.31 obsolete parameters that they are applicable to PA-RISC too.

-Linux section - for the Linux on PPC added for RHEL4 that glibc-devel (ppc) and glibc-devel (ppc64) are required per Bug 5436180
053007

-Related Documents section - resolved a problem with a broken link
061307

-Linux section - corrected version number of libaio for RHEL4 on Linux x86 from 0.3.96 to 0.3.102-1 per Remark 73923.1
071807

-Linux section - Moved footnotes for Linux x86_64 9.2 on RHEL3 directly beneath the section (per Remark 75021.1)

- Added LD_ASSUME_KERNEL to Linux Itanium on RHEL4 (per Remark 75729.1)

- Added OEL4 and OEL5 as certified for 10.2 on Linux x86 and Linux x86_64 (per Remark 75767.1)
072507

-Sun section - change comment to 112760-05 to state that it is needed for Native PL/SQL only, not generic PL/SQL.
080107

-Linux section - added default-rpm NOTE 386391.1 to SLES9 x86-64 section per Remark 76324.1
081707

-Linux section - added 11gR1 requirements for Linux x86.
082207

-Linux section - 11.1 x86 corrections, 10.2 SLES9 x86_64 corrections, made it consistent with Note 339510.1, addressed Remarks 77473.1,77604.1,77657.1,77682.1
091207

-Linux section - 10.2 x86 and x86_64 for [Red Hat,Oracle] Enterprise Linux requirements added (per Remark 78415.1)

-Tru64 section - 10.2,10.1, 9.2 changed the 5.1B required patchset to match the 10.1.0.5/9.2.0.8 patchset READMEs higher level. (per Remark 78544.1)
091907

-Sun section - Added patches needed for Fair Share Scheduler on Solaris 10

-Tru64 section - Clarified setting of NEW_WIRE_METHOD on 5.1B PK5
100307

-Linux section - Clarified 10.2 Linux Itanium on RHEL4 requirements (per Remark 79375.1)

- Clarified 10.1 Linux Itanium section based on 10.1.0.4 Patchset Readme (per 79375.1)

-Tru64 section - changed default per_proc_stack_size to 32M to help avoid ORA-4030s (per Remark 79349.1)
101707

-Main section - Removed Pre-Installation Script notes as they are now decommissioned (Remark 81013.1)

- added OPatch section

-Linux section - Added/Modified RHEL5/OEL5 10.2 Linux x86_64 rpms list per Release Note (Remark 80909.1)

- Removed reference to Note 301830.1 from Linux x86 section as it is for Linux x86_64 (Remark 80978.1)
102207

-Linux section - Added 11g on Linux x86_64 requirements
102307

-Linux section - Updated 10.2 on Linux on PPC (Remark 81403.1)
110707

-Mac OS X section - Updated certification section and fixed broken links (Remark 81782.1)

-Sun section - Fixed broken links to Sunsolve (Remark 81766.1)

-Tru64 section - Fixed broken links to HP support (Remark 81769.1)
111407

-Linux section - Added net.ipv4.tcp_rmem and net.ipv4.tcp_wmem to 11g Linux x86 (Remark 82482.1)

- Modified required RPMs for OEL/RHEL5 for 10.2 on x86 as updated in Note 419646.1 (Remark 82777.1)

- Removed reference to OEL5 document as it has been merged into Note 419646.1 (Remark 82778.1)

- Modified required RPMs for OEL/RHEL5 for 10.2 on x86_64 as updated in Note 421308.1 (Remark 82779.1)

- Removed reference to OEL5 document as it has been merged into Note 421308.1 (Remark 82780.1)

- added compat-gcc-32-c++ rpm and Patch 5240469 to 10.2 on x86_64 on RHEL4
111607

-AIX section - added 11g requirements

-HPUX section - added 11g requirements for HPUX Itanium

-Sun section - added 11g requirements
112907

HP section - added 11.1 requirements for HPUX PA-RISC

- Removed special installation reference for 10.1 on HPUX Itanium as there are none (Remark 83375.1)

-Linux section - change RMEM_DEFAULT to 4194304 for 11.1 on RHEL5,OEL5 on X86_64 (Remark 83748.1)

-Sun section - added SUNWuiu8 and SUNWulcf to 11.1 (Remark 83714.1)
120507

-Linux section - Added net.ipv4.tcp_rmem and net.ipv4.tcp_wmem to 10.2 Linux x86 (Remark 83919.1)
121307

-Linux section - Modified net.ipv4.tcp_rmem and rmem_max and rmem_default to 10.2 Linux x86 (Remark 84422.1)
121907

-HPUX section - Updated 11.1 and 10.2 HPUX OS patch requirements with superseding patches (Remark 84854.1)
013008

-AIX section - added Bug 5496862 as a requirement for running AIX 5.3 ML 5 (Remark 91473.1)
022708

-AIX section - added 6.1 as certified to 10.2 (Remark 92899.1)

- added IZ03475 for 5.3 ML7 to address ORA-27061 (Remark 92047.1)

-HP section - added kctune to OS commands now that 11.31 desupports kmtune (Remark 91954.1)

-Linux section - Update 9.2 on x86_64 on RHEL4 and removed requriement for gnome-libs and Orbit (32bit rpms) (Remark 91893.1)

-Sun section - Added that Update 6 is required for Solaris 9 with 10.2 and Update 7 for Solaris 8 (Remark 92015.1)
030508

-HP section - added more comments regarding 11.31 and -ignoresysprereqs (Remark 94177.1)
031808

-Linux section - Added kernel paramaters NET.IPV4.TCP_RMEM and NET.IPV4.TCP_WMEM to x86_64 and Itanium (Remark 94274.1 and 94741.1)
031908

-HPUX section - Corrected SHMMIN and SHMSEG settings for 11.1 on PA-RISC and IPF

-Sun section - Added month/date to give reference to Solaris Update levels
032108

-HPUX section - Removed reference to JDK 1.1.8 for 9.2 (Remark 95270.1)

-MAC OSX - Removed broken link
032608

-Linux section - Added SLES10 and Asinux 2.0 to cerified for Linux on Power for 10.2
041608

-Linux section - corrected typo on compat-libstdc++-devel for Linux x86 on 10.2
042308

-HPUX section - due to Bug 6995956 changing formula for maxuprc to be (nproc*9/10)+1 (Remark 97557.1)

-Sun section - Added 113029-07 as a required patch for Solaris 9 if using the Fair Scheduler ref: Note 558374.1 (Remark 97290.1)
092308

- All requests till September 20,2008 incorporated - Patch 6880880 details, Linux X86-64 11GR1 now pointing to correct Note 437123.1

- Obsolete kernel parameters in HP-UX 11.31 - MSGSEG & NFILE documented, added SLES-10 certification 10GR2 64 Bit on Linux (Itanium)

- 11GR1 install on Solaris 5.9 update 7 or higher is required, 11GR1 install on AIX requires 5.3 ML6 or higher is required

- OS Kernel update statement added under PURPOSE section. HP-UX 11.31 PHKL_35936 has been superseded by PHKL_38449

- 11GR1 install on AIX - PATCH 5496862 is required (see Note 390656.1).Note 567506.1 reference added to clarify SHMMAX size
100908

- HP Itanium 11.31 PHKL_37185 superseded by PHKL_38038

- SUN SPARC Solaris 10 Patch 127111-02 required for 10.2.0.4.0
103008

- HP-UX 11.31 with 10GR2. 4 HP-UX Patches required as per Part Number B25292-06

- AIX OS supported configuration for 11.1 as per Part Number B32076-03

- Relink of 10.2 fails in Linux on Power After upgrade to RHEL U2. Apply Patch 4767801

- SUN 10 with 11.1. Required SUN Patch 137111-04 as per Part Number B32314-02

- HP-UX on OS 11.31 supported on 9.2
012209

- HP-UX superseded PPHSS_36343 with PHSS_38140

- HP-UX superseded PHSS_37201 with PHSS_38134

- AIX 5L required or above required for 10.2.0.4.0 & above as per NOTE 739371.1

- AIX 6.1 required packages for 11.1.0.6.0

- HP-RISC / HP-Itanium 11.31 support for 10.2

- Link to internal BUG 6613550 removed

- RHEL5.0 on Linux Itanium (ia64)

- OEL5 / RHEL5.0 rpm changes. Refer Note 421308.1 & Note 419646.1

- AIX issue addressed in Note 422031.1

- HP-UX 11.23 Itanium PHKL_33807 superseded by PHKL_38364

- HP-UX 11.23 Itanium PHKL_36667 superseded by PHKL_37653

- HP-UX 11.23 Itanium PHSS_37492 superseded by PHSS_34444

- HP-UX 11.23 Itanium PHSS_37498 superseded by PHSS_38138 or PHSS_39101

- HP-UX 11.23 Itanium PHSS_37492 superseded by PHSS_38134

- HP-UX 11.23 Itanium PHCO_36323 superseded by PHCO_37940

- RHEL5 certified on 10.2. Refer to Note 748378.1
020509

- HP-Itanium NFLOCKS, SEMMNI & MSGTQL parameter changes for 10.2. Part Number B25293-01. Web site below :-

- http://download.oracle.com/docs/cd/B19306_01/install.102/b25293/pre_install.htm#BABJHCJI
- Solaris patches 117837-05, 117846-08 & 118682-01 are only required for Solaris X86 - BUG 6968216

- On AIX 5.3 with 9.2 use -ignoreSysPrereqs with runInstaller (Note 293750.1)

- SEMMNS, SEMVMX & SHMMNI masked as Obsolete as per http://docs.sun.com/app/docs/doc/817-0404/appendixa-6?l=en&a=view&q=shmmax 022709

- HP-Itanium NFLOCKS, SEMMNI & MSGTQL parameter changes for 9.2 & 10.1.

- 10.2,10.1 & 9.2 - Oracle Solaris 10 install Sun patch 127111-03 (SPARC) / 127127-11 (x86-64) See Note 460424.1
032409

- net.ipv4.tcp_rmem & net.ipv4.tcp_wmem are no longer required for standalone install
050509

- IP_LOCAL_PORT_RANGE changes 9000 65500. Refer Note 339510.1 & Note 419646.1

- 11.31 (PA-RISC) required patches. Part Number B19067-08. Refer Section 4.1 Operating System Filesets for HP-UX 11.31. Web site below :-

- http://download.oracle.com/docs/cd/B19306_01/relnotes.102/b19067/toc.htm
- AIX with 11.1 changes:-

- xlC.aix50.rte:8.0.0.7 or later (AIX 5.3)

- xlC.rte:8.0.0.7 or later (AIX 5.3)

- xlC.aix61.rte:9.0.0.1 or later (AIX 6.1)

- xlC.rte:9.0.0.1 or later (AIX 6.1)

- rmem_default=262144 for 11.1, 10.1 & 10.2

- rmem_max for 11.1 is 4194304. rmem_max for 10.1 & 10.2 is 2097152

- wmem_default=262144

- tcp_rmem & ipv4.tcp_wmem are no longer required for standalone install

- HP-UX (Itanium & PA-RISC) with 11.1 MAXTSIZE_64BIT 1073741824

- Mac OS X - 10.2.0.4 available on Mac OS X Server 10.5 (Intel x86-64)

- Sun OS 137111-04 s/b 137137-09. Refer http://sunsolve.sun.com/search/document.do?assetkey=1-21-137137-09-1
- Sun OS 127111-02 s/b 127127-11. Refer http://sunsolve.sun.com/search/document.do?assetkey=1-21-127127-11-1
- Sun OS 127111-03 s/b 127127-11. Refer http://sunsolve.sun.com/search/document.do?assetkey=1-21-127127-11-1
- AIX 5.3. Added IY84780. Refer http://www-01.ibm.com/support/docview.wss?uid=isg1IY84780
- AIX 5.3. Added IY68989. Refer http://www-01.ibm.com/support/docview.wss?uid=isg1IY68989
- HugePages on 64-bit Linux. Fixed hard memlock 5243000 & soft memlock 5243000 values. Refer Note 361468.1
061009

- HP-UX 11.23 (IA64) OS Patches updated with 9.2.0. Same OS Patches as HP-UX 11.22 (IA64)
071409

- rpm's compat-gcc-34-3.4.6-4 & compat-gcc-34-c++-3.4.6-4 are not required for RHEL 5 & OEL 5

- MSGMAP,MAXSWAPCHUNKS, NCALLOUT, SEMMAP,VX_NCSIZE,NFILE, MSGSEG are obsolete on 11.31 (Itanium and PA-RISC) and no longer required to be set
080309

- Fix from Note 301665.1 incorporated for 11GR1 on Linux X86_64
090909

- 11GR2 requirements for Linux X86 32 BIT & Linux X86 64 BIT added
091809

- Fix swap details for Linux X86 64 Bit. If RAM greater than 14Gb then 10Gb

- Symbolic links not required for HP Itanium on 11GR1 as per Bug 8789180

- 11GR1 with Linux X86 64 BIT has reference to Note 437123.1 & Note 301665.1

- Oracle Solaris 8 with 10.2 missing packages list included. Refer to Note 366100.1

- Patch PHKL_38397 or later required on HP OS 11.31. Patch PHKL_37809 or later required for HP OS 11.23. Refer to Note 580273.1. Changes incorporated for 11GR1 & 10GR2.

- ulimit changes for Sun SPARC & 11GR1. Refer to Note 250262.1

- SHMMAX RAM reference added for Linux X86 32 BIT & Linux X86 64 BIT for 11GR1 & 10GR2. Refer to Note 567506.1.
121709

- 11GR2 Sun Sparc 64 BIT added

- 11GR2 Install Guide http://download.oracle.com/docs/cd/E11882_01/install.112/e10848/pre_install.htm#BABBBDGA
- 11GR2 Install Guide for SUN Sparc - Part Number E10848-03

- Linux X86-64 BIT. Added - kernel.shmall - Reference Note 301830.1, kernel.shmmax, kernel.shmmni, kernel.sem

- For 11GR2 & 11GR1 FILE-MAX value is 6815744. This is as per Bug 9140073

- Fixed PHKL_38397 or later

- Columns had moved for HP & were showing differently in Intenet Explorer & Fire Fox. Now Fixed
021110

- 11GR2 install details for AIX. Part Number E10854-01.

- 11GR2 AIX Install Guide http://download.oracle.com/docs/cd/E11882_01/install.112/e10854/pre_install.htm#CIHFICFD
- 11GR2 install details for HP. Part Number E10851-01.

- 11GR2 HP-UX Install Guide http://download.oracle.com/docs/cd/E11882_01/install.112/e10851/pre_install.htm#CIHEIFDE
- 11GR2 HP-UX Itanium Install Guide http://download.oracle.com/docs/cd/E11882_01/install.112/e10869/toc.htm
- 11GR2 install details for HP-UX Itanium.Part Number E10869-01
021910

- 10GR1 with HP-UX 11.31 (Itanium & PA-RISC). Added obsolete parameters Nfile and Msgseg

- 9.2.0 with HP-UX 11.31 (Itanium & PA-RISC). Added obsolete parameters Nfile and Msgseg

- 11GR2 with AIX 6.1, kernel has been upgraded to 6100-02-05 from previous level 6100-02-01.

- 11GR2 with AIX 6.1. APR have been removed with the upgraded kernel 6100-02-05
022310

- IBM JDK version for 11GR2
031810

-AIX parameters export AIXTHREAD_SCOPE=S for 11GR2 as per Part Number E10839-04
072110

-Swap requirements for 11GR2 for various platforms are in sync with Release Notes

-Swap requirements for 11GR1 for various platforms are in sync with Release Notes

-HP-UX OS Patches superseded for 10GR2. PHSS_37492 s/b PHSS_40537,PHKL_37653 s/b PHKL_41002

-HP-UX OS Patches superseded for 10GR2. PHSS_38134 s/b PHSS_40537, PHSS_39101 s/b PHSS_40541

-HP-UX OS Patches superseded for 10GR2. PHSS_34445 s/b PHSS_40547, PHSS_38140 s/b PHSS_40543

-HP-UX OS Patches superseded for 10GR2. PHSS_38134 s/b PHSS_40537, PHSS_36344 s/b PHSS_40539

-HP-UX OS Patches superseded for 10GR2. PHCO_37940 s/b PHCO_39699, PHSS_37492 s/b PHSS_40537.

-Oracle 11GR1 install on AIX Power 7 will fail without a Patch 9216848. Doc ID 1065579.1.

-Patch 6613550 has been superseded by 6718715 for AIX on 10GR2.

-net_core.wmem_max value on Linux changed to 1048576 for 11GR1.

-For 11GR2 & 11GR1 FILE-MAX value is 6815744. This is as per Bug 9140073.
072910

Master Note For OPatch (Doc ID 293369.1)

Patch Set Update (PSU) with Opatch details

Master Note addition under Related Documents Section
082010

Master Note list updated with Note 293369.1 & Note 851598.1
100610

10GR2 and 11GR1 on Linux x86 and Linux x86-64 are also certified on SLES11

Changed Asianux 3.0 to Asianux Server 3

Added Asianux Server 3 SP2 to Linux x86 & Linux X86-64 BIT for 11GR2

Disk Space and tmp size for 11GR1 on AIX modified as per Installation Guide

Note 1130325.1-Support Status-Oracle Database on Linux Itanium added to Linux Itanium OS section

RAM size consistent to 4GB for 11GR2 on HP, AIX, SUN & LINUX X86 64 BIT. Based on BUG # 9491478
120310

PA-RISC added for 10GR1 & 10GR2 for OS 11.11. Previous entry was just saying 11.11 (64bit). Now says 11.11 (PA-RISC) (64bit)

Broken Link for HP Kernel settings is fixed for 11GR2

Patch#5496862 as mandatory for Releases: 8.1.7 to 10.2 as stated in Note#390656.1 - IO Interoperability Issue between IBM ML05 and Oracle Databases.
122410

Maximum SHMMAX values for Linux x86 and x86-64 has been updated with the revised position from NOTE 567506.1
121311

11.2 on AIX: rsct.basic.rte and rsct.compat.clients.rte filesets are required for RAC configurations only

11.2 on zSeries Linux: added links to articles containing 11.2 requirements

Replaced Metalink references with My Oracle Support (MOS) references
012312

Solaris: 11.2.0.3 certified on Solaris 11 (SPARC and Solaris x86-64)

Solaris: Updated link to 11g Install Guide

Solaris: Solaris 8 patch 108940-76 or higher (not patch 112771-30) required for 10.2

Solaris: As per 11g Install Guide, recommended command to check swap is "swap -l" not "swap -s"

AIX: 11.2 certified on AIX 7.1 (with some required patches/packages)

Linux x86_64: 10.2 certified on SLES11
012412

10.2 certified on IBM Linux on Power RHEL5
012512

AIX: Updated list of required APARs for 11.2 and link to 11.2 Install Guide

AIX: Clarified that 10.2.0.3 or higher is required on AIX 6.1

AIX: Clarified that 10.2.0.4 or higher with CRS requires AIX 5.3 TL5 (5300-05) or higher - see Note:739371.1

Linux x86_64: Updated 11.2 swap requirements

Linux x86_64: Corrected WMEM_MAX setting for 10.2

Tru64: 10.2 kernel settings clarified
012612

Updated 11.2 RAM requirements for all 64-bit platforms (based on latest 11.2 Installation Guides)

HP-UX: Removed references to non-existant SHMMIN kernel parameter

HP-UX: Fixed link to 11.2 Installation Guide

HP-UX: Added recommendation to set MAXFILES and MAXFILES_LIM to 65536 as per Note:1061351.1

HP-UX: Added 11.2 recommendation to apply PHCO_41479 to fix an ASM disk discovery issue (unpublished Bug:10107681)

AIX: Starting with AIX 6.1, AIXTHREAD_SCOPE=S does not need to be set - see section 5.5 (page 217) of the IBM AIX Version 6.1 Differences Guide
012712

MAC OS X: Added OS requirements for 10.2

AIX: Updated the recommended 11.2 kernel parameters and system configuration parameters

Solaris: Fixed broken link to 11.2 Install Guide
022912

Solaris: SUNWmfrun is a required package for 11.1 and 11.2 (normally installed by default)

Linux: Required RHEL5 kernel is 2.6.18-8 or higher for 10.2

HP-UX: Clarified that kernel parameter NFILE is replaced by MAXFILES_LIM in HP-UX 11.31 (PA-RISC and Itanium)

Solaris: Replaced references to Sun Solaris with Oracle Solaris
030812

Linux x86_64: unixODBC-2.2.12 and unixODBC-devel-2.2.12 recommended for 11.2 (see Note:762206.1)

Linux x86_64: 11.2 SHMMAX recommendation is RAM times 0.5 (or higher at customer's discretion - see Note:567506.1)
081412

Solaris: Updated 11.2 swap requirements based on 11.2 Solaris Install Guide.

Solaris: 11.2 requires SUNWhea but not SUNWmfrun

Solaris: Added reference to Note 1190843.1 in 10.2 section

Linux x86: 10.2 and 11.1 certified on SLES11 x86

Linux x86-64: 11.1 certified on SLES11 x86-64, 11.2.0.3 certified on RHEL6/OEL6 x86-64
090612

Linux: unixODBC header and library files distributed together from ftp://ftp.unixodbc.org/pub/unixODBC/
Solaris: SUNWxcu4 required for 11.2 RAC and 11.1 RAC

HP-UX: Removed statement that MAXFILES_LIM directly replaces NFILE in 11.31 as this is incorrect

HP-UX: 11.2.0.3 for HP-UX Itanium ships with JDK 1.5.0.23 which is incompatible with Itanium 2 model 9310 processors

AIX: gpfs.base 3.2.1.8 is only required for RAC systems that will use GPFS cluster filesystems
UNIX is a trademark of the Open Group.

AIX is a trademark of International Business Machines Corp.

HP-UX is a trademark of Hewlett Packard Company

Linux is a trademark of Linus Torvalds.

Mac OS is a trademark of Apple Inc., registered in the U.S. and other countries.

Sun, Oracle, Java and Oracle Solaris are trademarks or registered trademarks of Oracle and/or its affiliates in the United States and other countries.

Tru64 Unix is a trademark of Compaq Information Technologies Group,. L.P. in the United States and other countries.

REFERENCES

NOTE:390900.1 - Requirements for Installing Oracle 10g (10.1.0.x) RDBMS on RHEL 4 on AMD64/EM64T (Linux x86-64)

NOTE:1152016.1 - Master Note For Oracle Database Upgrades and Migrations

BUG:4387087 - UNSATISFIEDLINKERROR: /TMP/ORAINSTALL*/JRE/1.4.2/LIB/I386/LIBAWT.SO: LIBXP.SO.6:

NOTE:1441282.1 - Requirements for Installing Oracle 11gR2 RDBMS on RHEL6 or OL6 64-bit (x86-64)

NOTE:301665.1 - pam_limits.so setting in 10g install guide for 64-bit Linux breaks console login

NOTE:293750.1 - When Starting the Oracle Universal Installer (OUI) On AIX5L 5.3, It Fails With `Checking operating system version: must be 5200 Failed <<<<`

NOTE:438766.1 - Requirements for Installing Oracle 11gR1 RDBMS on RHEL 5 on AMD64/EM64T

OLS:1.1

NOTE:272697.1 - Performance Degradation after upgrading OS to 5.1B PK3

NOTE:282036.1 - Minimum Software Versions and Patches Required to Support Oracle Products on IBM Power Systems

NOTE:763386.1 - Requirements for Installing Oracle 11gR2 32-bit on SLES 10 (x86)

NOTE:225710.1 - How to Verify You Have an Oracle Supported Kernel

BUG:9140073 - REQUIREMENTS DESCRIPTION OF FS.FILE-MAX IS NOT UNIFIED.

NOTE:1308859.1 - Requirements for Installing Oracle 11gR2 on SLES 10 SP3 on IBM: Linux on System z (s390x)

BUG:4712475 - GENCLNTSH KILLED DURING 10.2 INSTALLATION

BUG:3512068 - INSTALLER COMPLAINS WHILE PRE-REQUISITES CHECK

NOTE:880942.1 - Requirements for Installing Oracle 11gR2 RDBMS on RHEL (and OEL) 4 on AMD64/EM64T

NOTE:880989.1 - Requirements for Installing Oracle 11gR2 RDBMS on RHEL (and OEL) 5 on AMD64/EM64T

NOTE:314422.1 - Remote Diagnostic Agent (RDA) - Getting Started

NOTE:1379753.1 - AIX: ORA-07445 [ksmpclrpga] OR ORA-07445 [ksupop] ORA-07445 [lxhlinfo] OR Link/Relink/Make Fails With: ld: 0711-780 SEVERE ERROR: Symbol .ksmpfpva
(entry 58964) in object libserver11.a[ksmp.o]

NOTE:427754.1 - OUI exception: java.lang.ExceptionInInitializerError sun.awt.X11GraphicsEnvironment.initDisplay(Native Method)

BUG:4405422 - GLIBC-DEVEL-32BIT-9 NOT DOCUMENTED AS SOFTWARE PREREQUISITE - LINK ERROR

NOTE:748378.1 - Requirements for Installing Oracle 10gR2 RDBMS on RHEL 5 on Linux Itanium (ia64)

NOTE:762206.1 - Libsqora.So : Undefined Symbol: SQLGetPrivateProfilestringW

NOTE:353529.1 - Requirements for Installing Oracle 9iR2 64-bit on RHEL 4 x86-64 (AMD64/EM64T)

NOTE:437123.1 - Requirements for Installing Oracle 11gR1 RDBMS on RHEL 4 on AMD64/EM64T

NOTE:394360.1 - Requirements for Installing Oracle 10.1.0.x RDBMS on RHEL 3 x86 platform

NOTE:400227.1 - How To Install Oracle RDBMS Software On Itanium Servers With Itanium2 (Montecito, Montvale, Tukwila....) Processors

NOTE:351679.1 - 10g on x86_64 RHEL 3 Required RPM Architectures

NOTE:1157463.1 - Master Note For Oracle Database Client Installation

BUG:6995956 - RUNINSTALLER - OUI ALWAYS FAILS ON MAXUPRC BECAUSE REFHOST.XML HAS WRONG VALUE

NOTE:392940.1 - Requirements for Installing Oracle 10.1.0.x RDBMS on RHEL 4 x86 platform

NOTE:1306889.1 - Requirements for Installing Oracle 11gR2 on RHEL 5 on IBM: Linux on System z (s390x)

NOTE:421308.1 - Requirements For Installing Oracle10gR2 On RHEL 5/OEL 5 (x86_64)

NOTE:301830.1 - Upon startup of Linux database get ORA-27102: out of memory Linux-X86_64 Error: 28: No space left on device

NOTE:265262.1 - Things to Know About Linux

NOTE:1061351.1 - Get Various ORA-600 Error Followed By "HPUX-ia64 Error: 24: Too many open files"

NOTE:353735.1 - 10gR2 on x86_64 RHEL 3 Required RPM Architectures

BUG:5496862 - IO READING PROBLEMS AFTER INSTALLING IBM TECHNOLOGY LEVEL 5 (5300-05)

NOTE:376183.1 - Defining a "default RPMs" installation of the RHEL OS

NOTE:201200.1 - HP Tru64: Quick Start Guide - 9.2.0 RDBMS Installation

NOTE:1151427.1 - Master Note For Oracle Database Downgrade

BUG:4025250 - 9.2.0.6.0 - UNABLE TO CONVERT FROM ''UTF-8'' TO ''ISO8859-1'' FOR NLS!

NOTE:880211.1 - Requirements for Installing Oracle 11gR2 RDBMS on RHEL (and OEL) 4 x86

NOTE:1019106.102 - GENKSMS core dumps 64-BIT

NOTE:17094.1 - TECH: Unix Virtual Memory, Paging & Swapping explained

NOTE:880936.1 - Requirements for Installing Oracle 11gR2 RDBMS on RHEL (and OEL) 5 on 32-bit x86

NOTE:467166.1 - Oracle11g DBCA/DBUA Fail To Start With Error OUI-25031 or Java Exception "java.lang.UnsatisfiedLinkError: $ORACLE_HOME/lib/libOsUtils.so: Can't
load Sparc v9 64-bit .so on a Sparc 32-bit platform"

NOTE:558374.1 - Database Startup Fails With ORA-00443: Background Process "VKTM" Did Not Start

BUG:4884705 - DBCA TRIES BY DEFAULT TO USE TOO MUCH MEMORY FOR SGA

NOTE:884435.1 - Requirements for Installing Oracle 11gR2 64-bit (AMD64/EM64T) on SLES 10

NOTE:956194.1 - Requirements for Installing Oracle 10gR2 64-bit (AMD64/EM64T) on SLES 11

NOTE:1587357.1 - Oracle Database (RDBMS) on Unix AIX,HP-UX,Linux,Solaris Operating Systems Installation and Configuration Requirements Quick Reference (12.1)

NOTE:1307804.1 - Importance of TCP/UDP Parameters in 11gR2

NOTE:390656.1 - IO Interoperability Issue between IBM ML05 and Oracle Databases

NOTE:233659.1 - Async IO Hang

NOTE:250262.1 - RDA - Health Check / Validation Engine Guide

NOTE:263692.1 - 10g runInstaller (OUI) fails on startup with checkdir error: cannot create /oui/bin/ouica.sh

NOTE:343431.1 - Requirements for Installing Oracle 10gR2 RDBMS on RHEL 4 x86 platform

NOTE:308588.1 - Requirements for Installing Oracle 9iR2 64-bit on RedHat 3 on x86_64 (AMD/EM64T)

NOTE:1154613.1 - Master Note For Cloning Oracle Database Server ORACLE_HOME's Using the Oracle Universal Installer (OUI)

NOTE:1156586.1 - Master Note For Oracle Database Server Installation

NOTE:1290644.1 - Requirements for Installing Oracle 11gR2 on SLES 11 on IBM: Linux on System z (s390x)

NOTE:457143.1 - Requirements for Installing Oracle 11gR1 64-bit (AMD64/EM64T) on SLES 10

NOTE:460424.1 - Solaris 10 memory management conflicts with Automatic PGA Memory Management

NOTE:422031.1 - ORA-01122, ORA-01251 or data blocks reported as corrupted

NOTE:341507.1 - Oracle Database Server on Linux on IBM POWER

NOTE:1157464.1 - Master Note on Oracle Universal Installer (OUI) for installing Oracle Database Software

NOTE:1264074.1 - Linking Fails With "ld: 0706-010 The binder was killed by a signal: Segmentation fault" On AIX 6.1 And AIX 7.1

NOTE:386391.1 - Defining a "default RPMs" installation of the SLES OS

NOTE:387137.1 - Requirements for Installing Oracle 10gR2 32-bit (x86) on SLES 10

NOTE:261309.1 - ld Segmentation fault - Core Dumped When Relinking 9.2.0.4 on a Tru64 5.1B SP2

NOTE:43507.1 - HP-UX: Patch Levels Advised

NOTE:881025.1 - Requirements for Installing Oracle 11gR2 32-bit on SLES 11 (x86)

NOTE:430653.1 - Requirements for Installing Oracle 11gR1 32-bit on RHEL 4

NOTE:303859.1 - Requirements for Installing Oracle 9iR2 on RHEL 4

NOTE:366100.1 - Libmawt.so Libxm.So.4 No Such File Or Directory On Sun Solaris 8

NOTE:43208.1 - Certified Compilers

NOTE:252217.1 - Requirements for Installing Oracle 9iR2 32-bit on RHEL3

NOTE:1130325.1 - Support Status - Oracle Database on Linux Itanium

NOTE:430526.1 - /usr/bin/ld: skipping incompatible libstdc++_shared.so error after patch:5240469

NOTE:1065579.1 - OUI Crash In Module Libj9jit23.so With IBM JDK/JRE 1.5 SR4 On AIX When Running On The New POWER7 Based Hardware

NOTE:361169.1 - Requirements for Installing Oracle 9iR2 64-bit on SuSE SLES 9 x86_64 (AMD64/EM64T)

NOTE:361468.1 - HugePages on Oracle Linux 64-bit

NOTE:400429.1 - Requirements for Installing Oracle 10gR2 32-bit on SLES 9

NOTE:419646.1 - Requirements For Installing Oracle 10gR2 On RHEL/OEL 5 (x86)

NOTE:580273.1 - Processes Hang Waiting on 'cursor: pin S wait on X' (and other Wait Events) on HP-UX 11.23 and 11.31 Itanium Systems

NOTE:438765.1 - Requirements for Installing Oracle 11gR1 32bit RDBMS on RHEL 5 & OEL 5

NOTE:427976.1 - Requirements for Installing Oracle 9iR2 32-bit on SLES 9

NOTE:365607.1 - Requirements for Installing Oracle 10gR2 RDBMS on SLES 9 on AMD/EM64T

NOTE:567506.1 - Maximum SHMMAX values for Linux x86 and x86-64

NOTE:739371.1 - AIX: Cannot startup CRS after applying 10.2.0.4 patchset or CRS Bundle Patch# 3 and above

NOTE:851598.1 - Master Note of Linux OS Requirements for Database Server

NOTE:189256.1 - UNIX: Script to Verify Installation Requirements for Oracle 8.0.5 to 9.2 versions of RDBMS

NOTE:333348.1 - Install 10gR2 on Solaris 64 bits fails with: 'library -ldce: not found'

BUG:6968216 - DOC BUG : CONFUSING DESCRIPTION ABOUT REQUIRED SOLARIS PATCHES

NOTE:881044.1 - Requirements for Installing Oracle 11gR2 64-bit (AMD64/EM64T) on SLES 11

NOTE:415182.1 - DB 10.1 and 10.2 Install Requirements Quick Reference for zSeries based Linux

NOTE:452818.1 - Requirements for Installing Oracle 11gR1 32-bit on SLES 10

NOTE:285158.1 - Arc-Process Doesn't Release Online-Redolog And Can Not Be Killed on AIX5L

NOTE:290034.1 - Installation of a Database Patchset shows ERROR: Unable To Convert From ''Utf-8'' To ''646'' For Nls!

NOTE:339510.1 - Requirements for Installing Oracle 10gR2 RDBMS on RHEL 4 on AMD64/EM64T

NOTE:293369.1 - Master Note For OPatch

NOTE:401167.1 - Defining a "default RPMs" installation of the Oracle Enterprise Linux (OEL) OS

NOTE:373681.1 - Requirements for Installing Oracle 10gR2 64-bit (AMD64/EM64T) on SLES 10

产品

Oracle
Database Products > Oracle
Database Suite > Oracle
Database > Oracle
Database - Enterprise Edition > RDBMS
Oracle
Database Products > Oracle
Database Suite > Oracle
Database > Oracle
Database - Enterprise Edition > Dataserver
Installation and Relinking issue
Oracle
Database Products > Oracle
Database Suite > Oracle
Database > Oracle
Database - Standard Edition > Generic
RDBMS > Background
processes