linux下查看网络配置命令(转载)
2014-01-26 16:03
274 查看
转载http://visualcasm.blog.sohu.com/112127002.html
使用以下命令配置以太网络1、 ifconfig
可以使用ifconfig命令来配置并查看网络接口的配置情况。
例如:
(1) 配置eth0的IP地址, 同时激活该设备。
#ifconfig eth0 192.168.1.10 netmask 255.255.255.0 up
(2) 配置eth0别名设备eth0:1的IP地址,并添加路由。
#ifconfig eth0:1 192.168.1.3
#route add –host 192.168.1.3 dev eth0:1
(3) 激活设备。
#ifconfig eth0:1 up
(4) 禁用设备。
#ifconfig eth0:down
(5) 查看指定的网络接口的配置。
#ifconfig eth0
(6) 查看所有的网络接口配置。
#ifconfig
(7)Linux下的修改mac:
1.必须关闭网卡设备,否则会报告系统忙,无法更改。
命令是:“ifconfig eth0 down”。
2.修改Mac地址,这一步较Windows中的修改要简单。
命令是:“ifconfig eth0 hw ether 00AABBCCDDEE”
3.重新启用网卡
“ifconfig eth0 up”网卡的Mac地址更改就完成了。
现在还有很多软件提供了修改Mac地址的功能,如:Mac2001
2、 route
可以使用route命令来配置并查看内核路由表的配置情况。
例如:
(1) 添加到主机的路由。
#route add –host 192.168.1.2 dev eth0:0
#route add –host 10.20.30.148 gw 10.20.30.40
(2) 添加到网络的路由。
#route add –net 10.20.30.40 netmask 255.255.255.248 eth0
#route add –net 10.20.30.48 netmask 255.255.255.248 gw
10.20.30.41
#route add –net 192.168.1.0/24 eth1
(3) 添加默认网关。
#route add default gw 192.168.1.1
(4) 查看内核路由表的配置。
#route
(5)删除路由。
#route del –host 192.168.1.2 dev eth0:0
#route del –host 10.20.30.148 gw 10.20.30.40
#route del –net 10.20.30.40 netmask 255.255.255.248 eth0
#route del –net 10.20.30.48 netmask 255.255.255.248 gw
10.20.30.41
#route del –net 192.168.1.0/24 eth1
#route del default gw 192.168.1.1
对于1和2两点可使用下面的语句实现:
Ifconfig eth0 172.16.19.71 netmask 255.255.255.0
Route 0.0.0.0 gw 172.16.19.254
Service network restart
3、 traceroute
可以使用traceroute命令显示数据包到达目的主机所经过的路由。
例如:
#traceroute www.sina.com.cn
4、 ping
可以使用ping 命令来测试网络的连通性。
例如:
#ping www.sina.com.cn
#ping –c 4 192.168.1.12
5、 netstat
可以使用netstat命令来显示网络状态信息。
例如:
(1) 显示网络接口状态信息。
#netstat –i
(2) 显示所有监控中的服务器的Socket和正使用Socket的程序信息。
#netstat –lpe
(3) 显示内核路由表信息。
#netstat –r
#netstat –nr
(4) 显示TCP/UDP传输协议的连接状态。
#netstat –t
#netstat –u
6、 hostname
可以使用hostname命令来更改主机名。例如;
#hostname myhost
7、 arp
可以使用arp命令来配置并查看arp缓存。例如:
(1) 查看arp缓存。
#arp
(2) 添加一个IP地址和MAC地址的对应记录。
#arp –s 192.168.33.15 00:60:08:27:CE:B2
(3) 删除一个IP地址和MAC地址的对应缓存记录。
#arp –d192.168.33.15
相关文章推荐
- 转载:Linux网络基础总结(常用配置文件&常用命令)
- Linux命令 — 设置或查看网络配置命令ifconfig
- linux下查看网络配置命令
- 移植完linux-3.4.2内核,启动系统后使用命令ifconfig -a查看网络配置只有一个local backloop
- Linux ifconfig命令详解和使用示例(Linux网络参数配置和查看)
- 自己常用Linux命令的记录--查看硬件相关信息,内核的编译,网络的配置
- Linux命令 — 设置或查看网络配置命令ifconfig
- 移植完linux-3.4.2内核,启动系统后使用命令ifconfig -a查看网络配置,没有eth0
- Linux 下查看机器配置命令
- 10.6 监控io性能 ,free命令,ps命令,查看网络状态,linux下抓包
- Linux网络配置命令——ifconfig
- linux常用命令(配置查看,定时任务)
- linux下如何用命令配置网卡、dns、网关、如何查看网卡状态、如何查看网卡信息。
- linux下查看系统配置的命令
- Linux下常用网络配置文件及常用命令的介绍
- Linux查看系统配置常用命令
- Linux网络配置介绍及相关命令
- linux网络配置命令ifconfig,ip route
- LINUX查看硬件配置命令
- Linux查看系统配置常用命令