Base64加密解密原理以及代码实现

1. Base64使用A--Z,a--z,0--9,+,/ 这64个字符.

2. 编码原理:将3个字节转换成4个字节( (3 X 8) = 24 = (4 X 6) )先读入3个字节,每读一个字节,左移8位,再右移四次,每次6位,这样就有4个字节了.

3. 解码原理:将4个字节转换成3个字节.先读入4个6位(用或运算),每次左移6位,再右移3次,每次8位.这样就还原了.

Base64是一种很常见的编码规范，其作用是将二进制序列转换为人类可读的ASCII字符序列，常用在需用通过文本协议（比如HTTP和SMTP）来传输二进制数据的情况下。Base64并不是一种用于安全领域的加密解密算法（这类算法有DES等），尽管我们有时也听到使用Base64来加密解密的说法，但这里所说的加密与解密实际是指编码（encode）和解码（decode）的过程，其变换是非常简单的，仅仅能够避免信息被直接识别。

Base64采用了一种很简单的编码转换：对于待编码数据，以3个字节为单位，依次取6位数据并在前面补上两个0形成新的8位编码，由于3*8=4*6，这样3个字节的输入会变成4个字节的输出，长度上增加了1/3。

上面的处理还不能保证得到的字符都是可见字符，为了达到此目的，Base64制定了一个编码表，进行统一的转换。码表的大小为2^6=64，这也是Base64名称的由来。

Base64编码表

Value Encoding Value Encoding Value Encoding Value Encoding

0 A 17 R 34 i 51 z

1 B 18 S 35 j 52 0

2 C 19 T 36 k 53 1

3 D 20 U 37 l 54 2

4 E 21 V 38 m 55 3

5 F 22 W 39 n 56 4

6 G 23 X 40 o 57 5

7 H 24 Y 41 p 58 6

8 I 25 Z 42 q 59 7

9 J 26 a 43 r 60 8

10 K 27 b 44 s 61 9

11 L 28 c 45 t 62 +

12 M 29 d 46 u 63 /

13 N 30 e 47 v

14 O 31 f 48 w (pad) =

15 P 32 g 49 x

16 Q 33 h 50 y

Base64编解码算法都很简单，网上有很多源码，这里就不介绍了。

另外还有一点要注意的地方，前面提到编码是以3个字节为单位，当剩下的字符数量不足3个字节时，则应使用0进行填充，相应的，输出字符则使用'='占位，因此编码后输出的文本末尾可能会出现1至2个'='。

这是一种典型的编码转换的处理方法，类似的可能还有UTF16与UTF8之间的转换。

[cpp] view
plaincopy

/**

* /file base64.h

*/

#ifndef XYSSL_BASE64_H

#define XYSSL_BASE64_H

#define XYSSL_ERR_BASE64_BUFFER_TOO_SMALL -0x0010

#define XYSSL_ERR_BASE64_INVALID_CHARACTER -0x0012

#ifdef __cplusplus

extern "C" {

#endif

/**

* /brief Encode a buffer into base64 format

*

* /param dst destination buffer

* /param dlen size of the buffer

* /param src source buffer

* /param slen amount of data to be encoded

*

* /return 0 if successful, or XYSSL_ERR_BASE64_BUFFER_TOO_SMALL.

* *dlen is always updated to reflect the amount

* of data that has (or would have) been written.

*

* /note Call this function with *dlen = 0 to obtain the

* required buffer size in *dlen

*/

int base64_encode(const unsigned char *src, int slen,unsigned char *dst, int *dlen);

/**

* /brief Decode a base64-formatted buffer

*

* /param dst destination buffer

* /param dlen size of the buffer

* /param src source buffer

* /param slen amount of data to be decoded

*

* /return 0 if successful, XYSSL_ERR_BASE64_BUFFER_TOO_SMALL, or

* XYSSL_ERR_BASE64_INVALID_DATA if the input data is not

* correct. *dlen is always updated to reflect the amount

* of data that has (or would have) been written.

*

* /note Call this function with *dlen = 0 to obtain the

* required buffer size in *dlen

*/

int base64_decode(const unsigned char *src, int slen,unsigned char *dst, int *dlen);

/**

* /brief Checkup routine

*

* /return 0 if successful, or 1 if the test failed

*/

int base64_self_test( int verbose );

#ifdef __cplusplus

}

#endif

class CBase64

{

public:

CBase64();

virtual ~CBase64();

static BOOL Encrypt(const unsigned char *pSrc,int iSlen,unsigned char *pDst,int *iDlen,CString &strErrorInfo);

static BOOL Decrypt(const unsigned char *pSrc,int iSlen,unsigned char *pDst,int *iDlen,CString &strErrorInfo);

private:

};

#endif /* base64.h */

[cpp] view
plaincopy

//source file: base64.cpp

/*

* RFC 1521 base64 encoding/decoding

*

* Copyright (C) 2006-2007 Christophe Devine

*

* This library is free software; you can redistribute it and/or

* modify it under the terms of the GNU Lesser General Public

* License, version 2.1 as published by the Free Software Foundation.

*

* This library is distributed in the hope that it will be useful,

* but WITHOUT ANY WARRANTY; without even the implied warranty of

* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU

* Lesser General Public License for more details.

*

* You should have received a copy of the GNU Lesser General Public

* License along with this library; if not, write to the Free Software

* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,

* MA 02110-1301 USA

*/

#include "stdafx.h"

#include "base64.h"

static const unsigned char base64_enc_map[64] =

{

'A', 'B', 'C', 'D', 'E', 'F', 'G', 'H', 'I', 'J',

'K', 'L', 'M', 'N', 'O', 'P', 'Q', 'R', 'S', 'T',

'U', 'V', 'W', 'X', 'Y', 'Z', 'a', 'b', 'c', 'd',

'e', 'f', 'g', 'h', 'i', 'j', 'k', 'l', 'm', 'n',

'o', 'p', 'q', 'r', 's', 't', 'u', 'v', 'w', 'x',

'y', 'z', '0', '1', '2', '3', '4', '5', '6', '7',

'8', '9', '+', '/'

};

static const unsigned char base64_dec_map[128] =

{

127, 127, 127, 127, 127, 127, 127, 127, 127, 127,

127, 127, 127, 127, 127, 127, 127, 127, 127, 127,

127, 127, 127, 127, 127, 127, 127, 127, 127, 127,

127, 127, 127, 127, 127, 127, 127, 127, 127, 127,

127, 127, 127, 62, 127, 127, 127, 63, 52, 53,

54, 55, 56, 57, 58, 59, 60, 61, 127, 127,

127, 64, 127, 127, 127, 0, 1, 2, 3, 4,

5, 6, 7, 8, 9, 10, 11, 12, 13, 14,

15, 16, 17, 18, 19, 20, 21, 22, 23, 24,

25, 127, 127, 127, 127, 127, 127, 26, 27, 28,

29, 30, 31, 32, 33, 34, 35, 36, 37, 38,

39, 40, 41, 42, 43, 44, 45, 46, 47, 48,

49, 50, 51, 127, 127, 127, 127, 127

};

/*

* Encode a buffer into base64 format

*/

int base64_encode(const unsigned char *src, int slen,unsigned char *dst, int *dlen)

{

int i, n;

int C1, C2, C3;

unsigned char *p;

if( slen == 0 )

return( 0 );

n = (slen << 3) / 6;

switch( (slen << 3) - (n * 6) )

{

case 2: n += 3; break;

case 4: n += 2; break;

default: break;

}

if( *dlen < n + 1 )

{

*dlen = n + 1;

return( XYSSL_ERR_BASE64_BUFFER_TOO_SMALL );

}

n = (slen / 3) * 3;

for( i = 0, p = dst; i < n; i += 3 )

{

C1 = *src++;

C2 = *src++;

C3 = *src++;

*p++ = base64_enc_map[(C1 >> 2) & 0x3F];

*p++ = base64_enc_map[(((C1 & 3) << 4) + (C2 >> 4)) & 0x3F];

*p++ = base64_enc_map[(((C2 & 15) << 2) + (C3 >> 6)) & 0x3F];

*p++ = base64_enc_map[C3 & 0x3F];

}

if( i < slen )

{

C1 = *src++;

C2 = ((i + 1) < slen) ? *src++ : 0;

*p++ = base64_enc_map[(C1 >> 2) & 0x3F];

*p++ = base64_enc_map[(((C1 & 3) << 4) + (C2 >> 4)) & 0x3F];

if( (i + 1) < slen )

*p++ = base64_enc_map[((C2 & 15) << 2) & 0x3F];

else *p++ = '=';

*p++ = '=';

}

*dlen =static_cast<int>(p - dst);

*p = 0;

return( 0 );

}

/*

* Decode a base64-formatted buffer

*/

int base64_decode(const unsigned char *src, int slen,unsigned char *dst, int *dlen)

{

int i, j, n;

unsigned long x;

unsigned char *p;

for( i = j = n = 0; i < slen; i++ )

{

if( ( slen - i ) >= 2 &&

*(src+i) == '/r' && *(src+i+1) == '/n' )

continue;

if(*(src+i) == '/n' )

continue;

if(*(src+i) == '=' && ++j > 2 )

return( XYSSL_ERR_BASE64_INVALID_CHARACTER );

if(*(src+i) > 127 || base64_dec_map[*(src+i)] == 127 )

return( XYSSL_ERR_BASE64_INVALID_CHARACTER );

if( base64_dec_map[*(src+i)] < 64 && j != 0 )

return( XYSSL_ERR_BASE64_INVALID_CHARACTER );

n++;

}

if( n == 0 )

return( 0 );

n = ((n * 6) + 7) >> 3;

if( *dlen < n )

{

*dlen = n;

return( XYSSL_ERR_BASE64_BUFFER_TOO_SMALL );

}

for( j = 3, n = x = 0, p = dst; i > 0; i--, src++ )

{

if( *src == '/r' || *src == '/n' )

continue;

j -= ( base64_dec_map[*src] == 64 );

x = (x << 6) | ( base64_dec_map[*src] & 0x3F );

if( ++n == 4 )

{

n = 0;

if( j > 0 ) *p++ = (unsigned char)( x >> 16 );

if( j > 1 ) *p++ = (unsigned char)( x >> 8 );

if( j > 2 ) *p++ = (unsigned char)( x );

}

}

*dlen =static_cast<int>(p - dst);

return( 0 );

}

BOOL CBase64::Encrypt(const unsigned char *pSrc,int iSlen,unsigned char *pDst,int *iDlen,CString &strErrorInfo)

{

strErrorInfo=_T("");

int iRet=base64_encode(pSrc,iSlen,pDst,iDlen);

if(iRet==XYSSL_ERR_BASE64_BUFFER_TOO_SMALL)

strErrorInfo=_T("分配的缓冲区太小!");

else if(iRet==XYSSL_ERR_BASE64_INVALID_CHARACTER)

strErrorInfo=_T("无效数据!");

return iRet==0;

}

BOOL CBase64::Decrypt(const unsigned char *pSrc,int iSlen,unsigned char *pDst,int *iDlen,CString &strErrorInfo)

{

strErrorInfo=_T("");

int iRet=base64_decode(pSrc,iSlen,pDst,iDlen);

if(iRet==XYSSL_ERR_BASE64_BUFFER_TOO_SMALL)

strErrorInfo=_T("分配的缓冲区太小!");

else if(iRet==XYSSL_ERR_BASE64_INVALID_CHARACTER)

strErrorInfo=_T("无效数据!");

return iRet==0;

}