Mount Options for Oracle files when used with NFS on NAS devices (文档 ID 359515.1)
2013-11-19 08:13
1151 查看
In this Document
Oracle Database - Enterprise Edition - Version 10.1.0.2 to 12.1.0.1 [Release 10.1 to 12.1]
Information in this document applies to any platform.
Oracle Clusterware, Oracle Real Application Clusters, NAS
The options with which the NAS systems should be mounted are described. This note does not cover the new dNFS feature that was introduced in 11g.
This document is relevant to all environments using Oracle Clusterware & RAC.
In the table below
Binaries is the shared mount points where the Oracle Home and CRS_HOME is installed.
Datafiles includes Online Logs, Controlfile and Datafiles
nfsvers and vers are identical on those OS platforms that has nfsvers. The ver option is an alternative to the nfsvers option. It is included for compatibility with other operating systems
Please note that the mount options on each of the following cells are applicable only to those type of files listed in the column heading.
For RMAN backup sets, image copies, and Data Pump dump files, the "NOAC" mount option should not be specified - that is because RMAN and Data Pump do not check this option and specifying this can adversely affect performance.
* NFS mount option “forcedirectio” is required on Solaris platforms when mounting the OCR/CRS files when using Oracle 10.1.0.4 or 10.2.0.2 or later (Oracle unpublished bug 4466428)
** AIX is only supported with NAS on AIX 5.3 TL04 and higher with Oracle 10.2.0.1 and later
*** NAS devices are only supported with HPUX 11.23 or higher ONLY
# These mount options are for Linux kernels 2.6 and above. For older kernels please check Note 279393.1
Due to Unpublished bug 5856342, it is necessary to use the following init.ora parameter when using NAS with all versions of RAC on Linux (x86 & X86-64 platforms) until 10.2.0.4. This bug is fixed and included in 10.2.0.4 patchset.
filesystemio_options = DIRECTIO
See above (after the configuration for RAC) for the legends
NOTE:279393.1 - Linux/NetApp: RHEL/SUSE Setup Recommendations for NetApp Filer Storage
NOTE:762374.1 - Step by Step - Configure Direct NFS Client (DNFS) on Linux (11g)
![](https://oscdn.geek-share.com/Uploads/Images/Content/201708/200491d1ae6203cbdf7e02dca39a75b1.gif)
Oracle
Database Products > Oracle
Database > Oracle
Database > Oracle
Database - Enterprise Edition > Real
Application Cluster
Purpose |
Scope |
Details |
RAC including RACone and single instance RAC |
Single Instance (non-RAC) |
References |
APPLIES TO:
Oracle Database - Enterprise Edition - Version 10.1.0.2 to 12.1.0.1 [Release 10.1 to 12.1]Information in this document applies to any platform.
Oracle Clusterware, Oracle Real Application Clusters, NAS
PURPOSE
The options with which the NAS systems should be mounted are described. This note does not cover the new dNFS feature that was introduced in 11g.
SCOPE
This document is relevant to all environments using Oracle Clusterware & RAC.
DETAILS
RAC including RACone and single instance RAC
In the table below
Binaries is the shared mount points where the Oracle Home and CRS_HOME is installed.
Datafiles includes Online Logs, Controlfile and Datafiles
nfsvers and vers are identical on those OS platforms that has nfsvers. The ver option is an alternative to the nfsvers option. It is included for compatibility with other operating systems
Please note that the mount options on each of the following cells are applicable only to those type of files listed in the column heading.
For RMAN backup sets, image copies, and Data Pump dump files, the "NOAC" mount option should not be specified - that is because RMAN and Data Pump do not check this option and specifying this can adversely affect performance.
Operating System | Mount options for Binaries ## | Mount options for Oracle Datafiles | Mount options for CRS Voting Disk and OCR |
Sun Solaris * | rw,bg,hard,nointr,rsize=32768, wsize=32768,proto=tcp,noac, vers=3,suid | rw,bg,hard,nointr,rsize=32768, wsize=32768,proto=tcp,noac, forcedirectio, vers=3,suid | rw,bg,hard,nointr,rsize=32768, wsize=32768,proto=tcp,vers=3, noac,forcedirectio |
AIX (5L) ** | rw,bg,hard,nointr,rsize=32768, wsize=32768,proto=tcp, vers=3,timeo=600 | cio,rw,bg,hard,nointr,rsize=32768, wsize=32768,proto=tcp,noac, vers=3,timeo=600 | cio,rw,bg,hard,intr,rsize=32768, wsize=32768,tcp,noac, vers=3,timeo=600 |
HPUX 11.23 *** -- | rw,bg,vers=3,proto=tcp,noac, hard,nointr,timeo=600, rsize=32768,wsize=32768,suid | rw,bg,vers=3,proto=tcp,noac, forcedirectio,hard,nointr,timeo=600, rsize=32768,wsize=32768,suid | rw,bg,vers=3,proto=tcp,noac, forcedirectio,hard,nointr,timeo=600 ,rsize=32768,wsize=32768,suid |
Windows | Not Supported | Not Supported | Not Supported |
Linux x86 # **** | rw,bg,hard,nointr,rsize=32768, wsize=32768,tcp, vers=3, timeo=600, actimeo=0 | rw,bg,hard,nointr,rsize=32768, wsize=32768,tcp,actimeo=0, vers=3,timeo=600 | rw,bg,hard,nointr,rsize=32768, wsize=32768,tcp,noac,actimeo=0, vers=3,timeo=600 |
Linux x86-64 # **** | rw,bg,hard,nointr,rsize=32768, wsize=32768,tcp,vers=3, timeo=600, actimeo=0 | rw,bg,hard,nointr,rsize=32768, wsize=32768,tcp,actimeo=0, vers=3,timeo=600 | rw,bg,hard,nointr,rsize=32768, wsize=32768,tcp,noac,vers=3, timeo=600,actimeo=0 |
Linux - Itanium | rw,bg,hard,nointr,rsize=32768, wsize=32768,tcp,vers=3, timeo=600, actimeo=0 | rw,bg,hard,nointr,rsize=32768, wsize=32768,tcp,actimeo=0, vers=3,timeo=600 | rw,bg,hard,nointr,rsize=32768, wsize=32768,tcp,noac,vers=3, timeo=600,actimeo=0 |
** AIX is only supported with NAS on AIX 5.3 TL04 and higher with Oracle 10.2.0.1 and later
*** NAS devices are only supported with HPUX 11.23 or higher ONLY
# These mount options are for Linux kernels 2.6 and above. For older kernels please check Note 279393.1
Due to Unpublished bug 5856342, it is necessary to use the following init.ora parameter when using NAS with all versions of RAC on Linux (x86 & X86-64 platforms) until 10.2.0.4. This bug is fixed and included in 10.2.0.4 patchset.
filesystemio_options = DIRECTIO
Single Instance (non-RAC)
Operating System | Mount options for Binaries | Mount options for Oracle Datafiles |
Sun Solaris * (8, 9, 10) | rw,bg,hard,rsize=32768,wsize=32768,vers=3,nointr,proto=tcp,suid | rw,bg,hard,rsize=32768,wsize=32768,vers=3,[forcedirectio or llock],nointr,proto=tcp,suid |
AIX (5L) ** | rw,bg,hard,rsize=32768,wsize=32768,vers=3,intr,timeo=600,proto=tcp | rw,bg,hard,rsize=32768,wsize=32768,vers=3,cio,intr,timeo=600,proto=tcp |
HPUX 11.23 **** | rw,bg,hard,rsize=32768,wsize=32768,vers=3,nointr,timeo=600,proto=tcp,suid | rw,bg,hard,rsize=32768,wsize=32768,vers=3,nointr,timeo=600,proto=tcp, suid, forcedirectio |
Windows | Not Supported | Not Supported |
Linux x86 # | rw,bg,hard,rsize=32768,wsize=32768,vers=3,nointr,timeo=600,tcp | rw,bg,hard,rsize=32768,wsize=32768,vers=3,nointr,timeo=600,tcp |
Linux x86-64 # | rw,bg,hard,rsize=32768,wsize=32768,vers=3,nointr,timeo=600,tcp | rw,bg,hard,rsize=32768,wsize=32768,vers=3,nointr,timeo=600,tcp |
Linux - Itanium | rw,bg,hard,rsize=32768,wsize=32768,vers=3,nointr,timeo=600,tcp | rw,bg,hard,rsize=32768,wsize=32768,vers=3,nointr,timeo=600,tcp |
REFERENCES
NOTE:279393.1 - Linux/NetApp: RHEL/SUSE Setup Recommendations for NetApp Filer StorageNOTE:762374.1 - Step by Step - Configure Direct NFS Client (DNFS) on Linux (11g)
![](https://oscdn.geek-share.com/Uploads/Images/Content/201708/200491d1ae6203cbdf7e02dca39a75b1.gif)
|
|
Database Products > Oracle
Database > Oracle
Database > Oracle
Database - Enterprise Edition > Real
Application Cluster
相关文章推荐
- Mount Options for Oracle files when used with NFS on NAS devices (文档 ID 359515.1)
- Configuring raw devices (multipath) for Oracle Clusterware 10g Release 2 (10.2.0) on RHEL5-OEL5 [ID 564580.1]
- Configuring raw devices (multipath) for Oracle Clusterware 10g Release 2 (10.2.0) on RHEL5-OEL5 [ID 564580.1]
- Configuring raw devices (multipath) for Oracle Clusterware 10g Release 2 (10.2.0) on RHEL5-OEL5 [ID
- Configuring raw devices (multipath) for Oracle Clusterware 10g Release 2 (10.2.0) on RHEL5-OEL5 [ID 564580.1]
- Configuring raw devices (multipath) for Oracle Clusterware 10g Release 2 (10.2.0) on RHEL5-OEL5 [ID 564580.1]
- Configuring raw devices (multipath) for Oracle Clusterware 10g Release 2 (10.2.0) on RHEL5-OEL5 [ID 564580.1]
- Requirements for Installing Oracle 10gR2 RDBMS on RHEL 4 x86 platform (文档 ID 343431.1)
- Configuring raw devices (multipath) for Oracle Clusterware 10g Release 2 (10.2.0) on RHEL5-OEL5 [ID 564580.1]
- AIX上裸设备WARNING: Oracle recommends creating new datafiles on devices with zero offset.
- Configuring raw devices (multipath) for Oracle Clusterware 10g Release 2 (10.2.0) on RHEL5-OEL5 [ID 564580.1]
- with ffmpeg to encode video for live streaming and for recording to files for on-demand playback
- How do you search for files containing dos line endings (CRLF) with grep on Linux?
- [NPM] Run npm scripts when files change with onchange
- DNS Configuration for the SCAN used with Oracle RAC Database 11g Release 2
- Missing pdksh-5.2.14 package during Oracle 11.2.0.4 install on Oracle Linux 7 (文档 ID 1962046.1)
- FAQ: Oracle Database 12.1 Oracle Home User On Windows (文档 ID 1529702.1)
- How to Determine the Blocking Session for Event: 'cursor: pin S wait on X' (文档 ID 786507.1)
- Oracle Created Database Users: Password, Usage and Files References (文档 ID 160861.1)
- Database Initialization Parameters for Oracle E-Business Suite Release 12 (文档 ID 396009.1)