[数据结构]程杰字符串的基本操作代码
2013-10-19 08:35
267 查看
#include "string.h" #include "stdio.h" #include "stdlib.h" #include "math.h" #include "time.h" #define OK 1 #define ERROR 0 #define TRUE 1 #define FALSE 0 #define MAXSIZE 40 /* 存储空间初始分配量 */ typedef int Status; /* Status是函数的类型,其值是函数结果状态代码,如OK等 */ typedef int ElemType; /* ElemType类型根据实际情况而定,这里假设为int */ typedef char String[MAXSIZE + 1]; /* 0号单元存放串的长度 */ /* 生成一个其值等于chars的串T */ Status StrAssign(String T, char *chars) { int i; if (strlen(chars) > MAXSIZE) return ERROR; else { T[0] = strlen(chars); for (i = 1; i <= T[0]; i++) T[i] = *(chars + i - 1); return OK; } } /* 由串S复制得串T */ Status StrCopy(String T, String S) { int i; for (i = 0; i <= S[0]; i++) T[i] = S[i]; return OK; } /* 若S为空串,则返回TRUE,否则返回FALSE */ Status StrEmpty(String S) { if (S[0] == 0) return TRUE; else return FALSE; } /* 初始条件: 串S和T存在 */ /* 操作结果: 若S>T,则返回值>0;若S=T,则返回值=0;若S<T,则返回值<0 */ int StrCompare(String S, String T) { int i; for (i = 1; i <= S[0] && i <= T[0]; ++i) if (S[i] != T[i]) return S[i] - T[i]; return S[0] - T[0]; } /* 返回串的元素个数 */ int StrLength(String S) { return S[0]; } /* 初始条件:串S存在。操作结果:将S清为空串 */ Status ClearString(String S) { S[0] = 0;/* 令串长为零 */ return OK; } /* 用T返回S1和S2联接而成的新串。若未截断,则返回TRUE,否则FALSE */ Status Concat(String T, String S1, String S2) { int i; if (S1[0] + S2[0] <= MAXSIZE) { /* 未截断 */ for (i = 1; i <= S1[0]; i++) T[i] = S1[i]; for (i = 1; i <= S2[0]; i++) T[S1[0] + i] = S2[i]; T[0] = S1[0] + S2[0]; return TRUE; } else { /* 截断S2 */ for (i = 1; i <= S1[0]; i++) T[i] = S1[i]; for (i = 1; i <= MAXSIZE - S1[0]; i++) T[S1[0] + i] = S2[i]; T[0] = MAXSIZE; return FALSE; } } /* 用Sub返回串S的第pos个字符起长度为len的子串。 */ Status SubString(String Sub, String S, int pos, int len) { int i; if (pos < 1 || pos > S[0] || len < 0 || len > S[0] - pos + 1) return ERROR; for (i = 1; i <= len; i++) Sub[i] = S[pos + i - 1]; Sub[0] = len; return OK; } /* 返回子串T在主串S中第pos个字符之后的位置。若不存在,则函数返回值为0。 */ /* 其中,T非空,1≤pos≤StrLength(S)。 */ /* 蛮力法*/ int Index(String S, String T, int pos) { int i = pos; /* i用于主串S中当前位置下标值,若pos不为1,则从pos位置开始匹配 */ int j = 1; /* j用于子串T中当前位置下标值 */ while (i <= S[0] && j <= T[0]) /* 若i小于S的长度并且j小于T的长度时,循环继续 */ { if (S[i] == T[j]) /* 两字母相等则继续 */ { ++i; ++j; } else /* 指针后退重新开始匹配 */ { i = i - j + 2; /* i退回到上次匹配首位的下一位 */ j = 1; /* j退回到子串T的首位 */ } } if (j > T[0]) return i - T[0]; else return 0; } /* T为非空串。若主串S中第pos个字符之后存在与T相等的子串, */ /* 则返回第一个这样的子串在S中的位置,否则返回0 */ int Index2(String S, String T, int pos) { int n, m, i; String sub; if (pos > 0) { n = StrLength(S); /* 得到主串S的长度 */ m = StrLength(T); /* 得到子串T的长度 */ i = pos; while (i <= n - m + 1) { /* 循环条件 */ SubString(sub, S, i, m); /* 取主串中第i个位置长度与T相等的子串给sub */ if (StrCompare(sub, T) != 0) /* 如果两串不相等 */ ++i; else /* 如果两串相等 */ return i; /* 则返回i值 */ } } return 0; /* 若无子串与T相等,返回0 */ } /* 初始条件: 串S和T存在,1≤pos≤StrLength(S)+1 */ /* 操作结果: 在串S的第pos个字符之前插入串T。完全插入返回TRUE,部分插入返回FALSE */ Status StrInsert(String S, int pos, String T) { int i; if (pos < 1 || pos > S[0] + 1) return ERROR; if (S[0] + T[0] <= MAXSIZE) { /* 完全插入 */ for (i = S[0]; i >= pos; i--) S[i + T[0]] = S[i]; for (i = pos; i < pos + T[0]; i++) S[i] = T[i - pos + 1]; S[0] = S[0] + T[0]; return TRUE; } else { /* 部分插入 */ for (i = MAXSIZE; i <= pos; i--) S[i] = S[i - T[0]]; for (i = pos; i < pos + T[0]; i++) S[i] = T[i - pos + 1]; S[0] = MAXSIZE; return FALSE; } } /* 初始条件: 串S存在,1≤pos≤StrLength(S)-len+1 */ /* 操作结果: 从串S中删除第pos个字符起长度为len的子串 */ Status StrDelete(String S, int pos, int len) { int i; if (pos < 1 || pos > S[0] - len + 1 || len < 0) return ERROR; for (i = pos + len; i <= S[0]; i++) S[i - len] = S[i]; S[0] -= len; return OK; } /* 初始条件: 串S,T和V存在,T是非空串(此函数与串的存储结构无关) */ /* 操作结果: 用V替换主串S中出现的所有与T相等的不重叠的子串 */ Status Replace(String S, String T, String V) { int i = 1; /* 从串S的第一个字符起查找串T */ if (StrEmpty(T)) /* T是空串 */ return ERROR; do { i = Index(S, T, i); /* 结果i为从上一个i之后找到的子串T的位置 */ if (i) /* 串S中存在串T */ { StrDelete(S, i, StrLength(T)); /* 删除该串T */ StrInsert(S, i, V); /* 在原串T的位置插入串V */ i += StrLength(V); /* 在插入的串V后面继续查找串T */ } } while (i); return OK; } /* 输出字符串T */ void StrPrint(String T) { int i; for (i = 1; i <= T[0]; i++) printf("%c", T[i]); printf("\n"); } int main() { int i, j; Status k; char s; String t, s1, s2; printf("请输入串s1: "); k = StrAssign(s1, "abcd"); if (!k) { printf("串长超过MAXSIZE(=%d)\n", MAXSIZE); exit(0); } printf("串长为%d 串空否?%d(1:是 0:否)\n", StrLength(s1), StrEmpty(s1)); StrCopy(s2, s1); printf("拷贝s1生成的串为: "); StrPrint(s2); printf("请输入串s2: "); k = StrAssign(s2, "efghijk"); if (!k) { printf("串长超过MAXSIZE(%d)\n", MAXSIZE); exit(0); } i = StrCompare(s1, s2); if (i < 0) s = '<'; else if (i == 0) s = '='; else s = '>'; printf("串s1%c串s2\n", s); k = Concat(t, s1, s2); printf("串s1联接串s2得到的串t为: "); StrPrint(t); if (k == FALSE) printf("串t有截断\n"); ClearString(s1); printf("清为空串后,串s1为: "); StrPrint(s1); printf("串长为%d 串空否?%d(1:是 0:否)\n", StrLength(s1), StrEmpty(s1)); printf("求串t的子串,请输入子串的起始位置,子串长度: "); i = 2; j = 3; printf("%d,%d \n", i, j); k = SubString(s2, t, i, j); if (k) { printf("子串s2为: "); StrPrint(s2); } printf("从串t的第pos个字符起,删除len个字符,请输入pos,len: "); i = 4; j = 2; printf("%d,%d \n", i, j); StrDelete(t, i, j); printf("删除后的串t为: "); StrPrint(t); i = StrLength(s2) / 2; StrInsert(s2, i, t); printf("在串s2的第%d个字符之前插入串t后,串s2为:\n", i); StrPrint(s2); i = Index(s2, t, 1); printf("s2的第%d个字母起和t第一次匹配\n", i); SubString(t, s2, 1, 1); printf("串t为:"); StrPrint(t); Concat(s1, t, t); printf("串s1为:"); StrPrint(s1); Replace(s2, t, s1); printf("用串s1取代串s2中和串t相同的不重叠的串后,串s2为: "); StrPrint(s2); return 0; }
相关文章推荐
- 数据结构:字符串的基本操作
- C++语言数据结构 串的基本操作实例代码
- SqListFunc顺序链表的12个基本操作的C语言代码(数据结构)
- Python基础教程代码与注释P44 3.1 基本字符串操作 3.2 字符串格式化:精简版
- 数据结构:字符串的堆分配存储结构,基本操作实现和测试。
- Swift字符串基本操作(二)
- 第四章 串的基本操作【数据结构】
- 字符串操作 - 截取字符串长度代码段
- 字符串的基本操作,c语言实现
- python用字符串操作20行代码简单爬虫入门+案例(爬取一章《三体》小说)
- Html基本操作实例代码
- 数据结构 串(链式存储)的基本操作
- python 内置数据结构的基本操作 —— dict(1)
- python 内置数据结构的基本操作 —— dict(2)
- 【转】数据结构链表操作之双链表的基本操作
- 进击的数据结构之六队列的基本操作-顺序结构
- C# 一个自己写的树结构代码(2)-Array,HashTable,List,String数据结构操作封装
- 数据库基本操作小摘(代码由mysql-essential-5.1.50-win32测试通过)
- 可变字符串的基本操作