Redis以及Redis的php扩展安装

一. 关于 Redis

Redis是一种高级 key-value 数据库。它跟 memcached 类似，不过数据可以持久化，而且支持的数据类型很丰富。它在保持键值数据库简单快捷特点的同时，又吸收了部分关系数据库的优点。从而使它的位置处于关系数据库和键值数据库之间。Redis不仅能保存Strings类型的数据，还能保存Lists类型（有序）和Sets类型（无序）的数据，而且还能完成排序（SORT）等高级功能，在实现INCR，SETNX等功能的时候，保证了其操作的原子性，除此以外，还支持主从复制等功能。Redis可以被看成是一个数据结构服务器。

Redis的所有数据都是保存在内存中，然后不定期的通过异步方式保存到磁盘上(这称为“半持久化模式”)；也可以把每一次数据变化都写入到一个append only file(aof)里面(这称为“全持久化模式”)。

官方网站： http://redis.io/

PPT介绍： http://simonwillison.net/static/2010/redis-tutorial/

 

二. 安装 Redis

Redis的代码遵循ANSI-C编写，可以在所有POSIX系统（如Linux, *BSD, Mac OS X, Solaris等）上安装运行。而且Redis并不依赖任何非标准库，也没有编译参数必需添加。编译安装Redis，我们唯一需要的就是make。

1. 下载redis最新版本2.2.12

cd /usr/local/src

wget http://redis.googlecode.com/files/redis-2.2.12.tar.gz
2. 编译安装redis

tar zxvf redis-2.2.12.tar.gz

cd redis-2.2.12

make

make命令执行完成后，会在当前目录下生成4个可执行文件，分别是redis-server、redis-cli、redis-benchmark、redis-stat，它们的作用如下：
redis-server：Redis服务器的daemon启动程序
redis-cli：Redis命令行操作工具。当然，你也可以用telnet根据其纯文本协议来操作
redis-benchmark：Redis性能测试工具，测试Redis在你的系统及你的配置下的读写性能
redis-stat：Redis状态检测工具，可以检测Redis当前状态参数及延迟状况

3. 建立Redis目录（建议，非必需）

执行以下命令建立相关目录并拷贝相关文件至目录中：
sudo -s

mkdir -p /usr/local/redis/bin

mkdir -p /usr/local/redis/etc

mkdir -p /usr/local/redis/var

cp redis-server redis-cli redis-benchmark redis-stat /usr/local/redis/bin/

cp redis.conf /usr/local/redis/etc/

建立Redis目录，只是为了将Redis相关的资源更好的统一管理。你也可以使用
    make install

安装在系统默认目录

 

三. 配置 Redis

成功安装Redis后，直接执行redis-server即可运行Redis，此时它是按照默认配置来运行的（默认配置不是后台运行）。如果我们希望Redis按我们的要求运行，则需要修改配置文件，Redis的配置文件就是上面第二个cp操作的redis.conf文件，目前它被我们拷贝到了/usr/local/redis/etc/目录下。修改它就可以配置redis server了。

1. redis.conf 配置参数：

#是否作为守护进程运行
daemonize yes

#如以后台进程运行，则需指定一个pid，默认为/var/run/redis.pid
pidfile redis.pid

#绑定主机IP，默认值为127.0.0.1

#bind 127.0.0.1

#Redis默认监听端口
port 6379

#客户端闲置多少秒后，断开连接，默认为300（秒）
timeout 300

#日志记录等级，有4个可选值，debug，verbose（默认值），notice，warning
loglevel verbose

#指定日志输出的文件名，默认值为stdout，也可设为/dev/null屏蔽日志
logfile stdout

#可用数据库数，默认值为16，默认数据库为0
databases 16

#保存数据到disk的策略

#当有一条Keys数据被改变是，900秒刷新到disk一次
save 900 1

#当有10条Keys数据被改变时，300秒刷新到disk一次
save 300 10

#当有1w条keys数据被改变时，60秒刷新到disk一次
save 60 10000

#当dump .rdb数据库的时候是否压缩数据对象
rdbcompression yes

#本地数据库文件名，默认值为dump.rdb
dbfilename dump.rdb

#本地数据库存放路径，默认值为 ./
dir /usr/local/redis/var/

###########  Replication #####################

#Redis的复制配置

# slaveof <masterip> <masterport> 当本机为从服务时，设置主服务的IP及端口

# masterauth <master-password> 当本机为从服务时，设置主服务的连接密码

#连接密码

# requirepass foobared

#最大客户端连接数，默认不限制

# maxclients 128

#最大内存使用设置，达到最大内存设置后，Redis会先尝试清除已到期或即将到期的Key，当此方法处理后，任到达最大内存设置，将无法再进行写入操作。

# maxmemory <bytes>

#是否在每次更新操作后进行日志记录，如果不开启，可能会在断电时导致一段时间内的数据丢失。因为redis本身同步数据文件是按上面save条件来同步的，所以有的数据会在一段时间内只存在于内存中。默认值为no
appendonly no

#更新日志文件名，默认值为appendonly.aof

#appendfilename

#更新日志条件，共有3个可选值。no表示等操作系统进行数据缓存同步到磁盘，always表示每次更新操作后手动调用fsync()将数据写到磁盘，everysec表示每秒同步一次（默认值）。

# appendfsync always
appendfsync everysec

# appendfsync no

################ VIRTUAL MEMORY ###########

#是否开启VM功能，默认值为no
vm-enabled no

# vm-enabled yes

#虚拟内存文件路径，默认值为/tmp/redis.swap，不可多个Redis实例共享
vm-swap-file logs/redis.swap

#将所有大于vm-max-memory的数据存入虚拟内存,无论vm-max-memory设置多小,所有索引数据都是内存存储的 (Redis的索引数据就是keys),也就是说,当vm-max-memory设置为0的时候,其实是所有value都存在于磁盘。默认值为0。
vm-max-memory 0

vm-page-size 32

vm-pages 134217728

vm-max-threads 4

############# ADVANCED CONFIG ###############
glueoutputbuf yes

hash-max-zipmap-entries 64

hash-max-zipmap-value 512

#是否重置Hash表
activerehashing yes

注意：Redis官方文档对VM的使用提出了一些建议:

** 当你的key很小而value很大时,使用VM的效果会比较好.因为这样节约的内存比较大.

** 当你的key不小时,可以考虑使用一些非常方法将很大的key变成很大的value,比如你可以考虑将key,value组合成一个新的value.

** 最好使用linux ext3 等对稀疏文件支持比较好的文件系统保存你的swap文件.

** vm-max-threads这个参数,可以设置访问swap文件的线程数,设置最好不要超过机器的核数.如果设置为0,那么所有对swap文件的操作都是串行的.可能会造成比较长时间的延迟,但是对数据完整性有很好的保证.

2. 调整系统内核参数

如果内存情况比较紧张的话，需要设定内核参数：
    echo 1 > /proc/sys/vm/overcommit_memory

这里说一下这个配置的含义：/proc/sys/vm/overcommit_memory

该文件指定了内核针对内存分配的策略，其值可以是0、1、2。

0，表示内核将检查是否有足够的可用内存供应用进程使用；如果有足够的可用内存，内存申请允许；否则，内存申请失败，并把错误返回给应用进程。

1，表示内核允许分配所有的物理内存，而不管当前的内存状态如何。

2，表示内核允许分配超过所有物理内存和交换空间总和的内存

Redis在dump数据的时候，会fork出一个子进程，理论上child进程所占用的内存和parent是一样的，比如parent占用的内存为8G，这个时候也要同样分配8G的内存给child, 如果内存无法负担，往往会造成redis服务器的down机或者IO负载过高，效率下降。所以这里比较优化的内存分配策略应该设置为 1（表示内核允许分配所有的物理内存，而不管当前的内存状态如何）

我的配置文件：

# Redis configuration file example

# Note on units: when memory size is needed, it is possible to specifiy
# it in the usual form of 1k 5GB 4M and so forth:
#
# 1k => 1000 bytes
# 1kb => 1024 bytes
# 1m => 1000000 bytes
# 1mb => 1024*1024 bytes
# 1g => 1000000000 bytes
# 1gb => 1024*1024*1024 bytes
#
# units are case insensitive so 1GB 1Gb 1gB are all the same.

# By default Redis does not run as a daemon. Use 'yes' if you need it.
# Note that Redis will write a pid file in /var/run/redis.pid when daemonized.
daemonize yes

# When running daemonized, Redis writes a pid file in /var/run/redis.pid by
# default. You can specify a custom pid file location here.
pidfile /var/run/redis.pid

# Accept connections on the specified port, default is 6379.
# If port 0 is specified Redis will not listen on a TCP socket.
port 6379

# If you want you can bind a single interface, if the bind option is not
# specified all the interfaces will listen for incoming connections.
#
bind 127.0.0.1

# Specify the path for the unix socket that will be used to listen for
# incoming connections. There is no default, so Redis will not listen
# on a unix socket when not specified.
#
# unixsocket /tmp/redis.sock

# Close the connection after a client is idle for N seconds (0 to disable)
timeout 300

# Set server verbosity to 'debug'
# it can be one of:
# debug (a lot of information, useful for development/testing)
# verbose (many rarely useful info, but not a mess like the debug level)
# notice (moderately verbose, what you want in production probably)
# warning (only very important / critical messages are logged)
loglevel verbose

# Specify the log file name. Also 'stdout' can be used to force
# Redis to log on the standard output. Note that if you use standard
# output for logging but daemonize, logs will be sent to /dev/null
logfile stdout

# To enable logging to the system logger, just set 'syslog-enabled' to yes,
# and optionally update the other syslog parameters to suit your needs.
# syslog-enabled no

# Specify the syslog identity.
# syslog-ident redis

# Specify the syslog facility. Must be USER or between LOCAL0-LOCAL7.
# syslog-facility local0

# Set the number of databases. The default database is DB 0, you can select
# a different one on a per-connection basis using SELECT <dbid> where
# dbid is a number between 0 and 'databases'-1
databases 16

################################ SNAPSHOTTING #################################
#
# Save the DB on disk:
#
# save <seconds> <changes>
#
# Will save the DB if both the given number of seconds and the given
# number of write operations against the DB occurred.
#
# In the example below the behaviour will be to save:
# after 900 sec (15 min) if at least 1 key changed
# after 300 sec (5 min) if at least 10 keys changed
# after 60 sec if at least 10000 keys changed
#
# Note: you can disable saving at all commenting all the "save" lines.

save 900 1
save 300 10
save 60 10000

# Compress string objects using LZF when dump .rdb databases?
# For default that's set to 'yes' as it's almost always a win.
# If you want to save some CPU in the saving child set it to 'no' but
# the dataset will likely be bigger if you have compressible values or keys.
rdbcompression yes

# The filename where to dump the DB
dbfilename dump.rdb

# The working directory.
#
# The DB will be written inside this directory, with the filename specified
# above using the 'dbfilename' configuration directive.
#
# Also the Append Only File will be created inside this directory.
#
# Note that you must specify a directory here, not a file name.
dir /usr/local/redis

################################# REPLICATION #################################

# Master-Slave replication. Use slaveof to make a Redis instance a copy of
# another Redis server. Note that the configuration is local to the slave
# so for example it is possible to configure the slave to save the DB with a
# different interval, or to listen to another port, and so on.
#
# slaveof <masterip> <masterport>

# If the master is password protected (using the "requirepass" configuration
# directive below) it is possible to tell the slave to authenticate before
# starting the replication synchronization process, otherwise the master will
# refuse the slave request.
#
# masterauth <master-password>

# When a slave lost the connection with the master, or when the replication
# is still in progress, the slave can act in two different ways:
#
# 1) if slave-serve-stale-data is set to 'yes' (the default) the slave will
# still reply to client requests, possibly with out of data data, or the
# data set may just be empty if this is the first synchronization.
#
# 2) if slave-serve-stale data is set to 'no' the slave will reply with
# an error "SYNC with master in progress" to all the kind of commands
# but to INFO and SLAVEOF.
#
slave-serve-stale-data yes

################################## SECURITY ###################################

# Require clients to issue AUTH <PASSWORD> before processing any other
# commands. This might be useful in environments in which you do not trust
# others with access to the host running redis-server.
#
# This should stay commented out for backward compatibility and because most
# people do not need auth (e.g. they run their own servers).
#
# Warning: since Redis is pretty fast an outside user can try up to
# 150k passwords per second against a good box. This means that you should
# use a very strong password otherwise it will be very easy to break.
#
# requirepass foobared

# Command renaming.
#
# It is possilbe to change the name of dangerous commands in a shared
# environment. For instance the CONFIG command may be renamed into something
# of hard to guess so that it will be still available for internal-use
# tools but not available for general clients.
#
# Example:
#
# rename-command CONFIG b840fc02d524045429941cc15f59e41cb7be6c52
#
# It is also possilbe to completely kill a command renaming it into
# an empty string:
#
# rename-command CONFIG ""

################################### LIMITS ####################################

# Set the max number of connected clients at the same time. By default there
# is no limit, and it's up to the number of file descriptors the Redis process
# is able to open. The special value '0' means no limits.
# Once the limit is reached Redis will close all the new connections sending
# an error 'max number of clients reached'.
#
# maxclients 128

# Don't use more memory than the specified amount of bytes.
# When the memory limit is reached Redis will try to remove keys with an
# EXPIRE set. It will try to start freeing keys that are going to expire
# in little time and preserve keys with a longer time to live.
# Redis will also try to remove objects from free lists if possible.
#
# If all this fails, Redis will start to reply with errors to commands
# that will use more memory, like SET, LPUSH, and so on, and will continue
# to reply to most read-only commands like GET.
#
# WARNING: maxmemory can be a good idea mainly if you want to use Redis as a
# 'state' server or cache, not as a real DB. When Redis is used as a real
# database the memory usage will grow over the weeks, it will be obvious if
# it is going to use too much memory in the long run, and you'll have the time
# to upgrade. With maxmemory after the limit is reached you'll start to get
# errors for write operations, and this may even lead to DB inconsistency.
#
# maxmemory <bytes>

# MAXMEMORY POLICY: how Redis will select what to remove when maxmemory
# is reached? You can select among five behavior:
#
# volatile-lru -> remove the key with an expire set using an LRU algorithm
# allkeys-lru -> remove any key accordingly to the LRU algorithm
# volatile-random -> remove a random key with an expire set
# allkeys->random -> remove a random key, any key
# volatile-ttl -> remove the key with the nearest expire time (minor TTL)
# noeviction -> don't expire at all, just return an error on write operations
#
# Note: with all the kind of policies, Redis will return an error on write
# operations, when there are not suitable keys for eviction.
#
# At the date of writing this commands are: set setnx setex append
# incr decr rpush lpush rpushx lpushx linsert lset rpoplpush sadd
# sinter sinterstore sunion sunionstore sdiff sdiffstore zadd zincrby
# zunionstore zinterstore hset hsetnx hmset hincrby incrby decrby
# getset mset msetnx exec sort
#
# The default is:
#
# maxmemory-policy volatile-lru

# LRU and minimal TTL algorithms are not precise algorithms but approximated
# algorithms (in order to save memory), so you can select as well the sample
# size to check. For instance for default Redis will check three keys and
# pick the one that was used less recently, you can change the sample size
# using the following configuration directive.
#
# maxmemory-samples 3

############################## APPEND ONLY MODE ###############################

# By default Redis asynchronously dumps the dataset on disk. If you can live
# with the idea that the latest records will be lost if something like a crash
# happens this is the preferred way to run Redis. If instead you care a lot
# about your data and don't want to that a single record can get lost you should
# enable the append only mode: when this mode is enabled Redis will append
# every write operation received in the file appendonly.aof. This file will
# be read on startup in order to rebuild the full dataset in memory.
#
# Note that you can have both the async dumps and the append only file if you
# like (you have to comment the "save" statements above to disable the dumps).
# Still if append only mode is enabled Redis will load the data from the
# log file at startup ignoring the dump.rdb file.
#
# IMPORTANT: Check the BGREWRITEAOF to check how to rewrite the append
# log file in background when it gets too big.

appendonly yes

# The name of the append only file (default: "appendonly.aof")
appendfilename appendonly.aof

# The fsync() call tells the Operating System to actually write data on disk
# instead to wait for more data in the output buffer. Some OS will really flush
# data on disk, some other OS will just try to do it ASAP.
#
# Redis supports three different modes:
#
# no: don't fsync, just let the OS flush the data when it wants. Faster.
# always: fsync after every write to the append only log . Slow, Safest.
# everysec: fsync only if one second passed since the last fsync. Compromise.
#
# The default is "everysec" that's usually the right compromise between
# speed and data safety. It's up to you to understand if you can relax this to
# "no" that will will let the operating system flush the output buffer when
# it wants, for better performances (but if you can live with the idea of
# some data loss consider the default persistence mode that's snapshotting),
# or on the contrary, use "always" that's very slow but a bit safer than
# everysec.
#
# If unsure, use "everysec".

# appendfsync always
appendfsync everysec
# appendfsync no

# When the AOF fsync policy is set to always or everysec, and a background
# saving process (a background save or AOF log background rewriting) is
# performing a lot of I/O against the disk, in some Linux configurations
# Redis may block too long on the fsync() call. Note that there is no fix for
# this currently, as even performing fsync in a different thread will block
# our synchronous write(2) call.
#
# In order to mitigate this problem it's possible to use the following option
# that will prevent fsync() from being called in the main process while a
# BGSAVE or BGREWRITEAOF is in progress.
#
# This means that while another child is saving the durability of Redis is
# the same as "appendfsync none", that in pratical terms means that it is
# possible to lost up to 30 seconds of log in the worst scenario (with the
# default Linux settings).
#
# If you have latency problems turn this to "yes". Otherwise leave it as
# "no" that is the safest pick from the point of view of durability.
no-appendfsync-on-rewrite no

################################## SLOW LOG ###################################

# The Redis Slow Log is a system to log queries that exceeded a specified
# execution time. The execution time does not include the I/O operations
# like talking with the client, sending the reply and so forth,
# but just the time needed to actually execute the command (this is the only
# stage of command execution where the thread is blocked and can not serve
# other requests in the meantime).
#
# You can configure the slow log with two parameters: one tells Redis
# what is the execution time, in microseconds, to exceed in order for the
# command to get logged, and the other parameter is the length of the
# slow log. When a new command is logged the oldest one is removed from the
# queue of logged commands.

# The following time is expressed in microseconds, so 1000000 is equivalent
# to one second. Note that a negative number disables the slow log, while
# a value of zero forces the logging of every command.
slowlog-log-slower-than 10000

# There is no limit to this length. Just be aware that it will consume memory.
# You can reclaim memory used by the slow log with SLOWLOG RESET.
slowlog-max-len 1024

################################ VIRTUAL MEMORY ###############################

### WARNING! Virtual Memory is deprecated in Redis 2.4
### The use of Virtual Memory is strongly discouraged.

# Virtual Memory allows Redis to work with datasets bigger than the actual
# amount of RAM needed to hold the whole dataset in memory.
# In order to do so very used keys are taken in memory while the other keys
# are swapped into a swap file, similarly to what operating systems do
# with memory pages.
#
# To enable VM just set 'vm-enabled' to yes, and set the following three
# VM parameters accordingly to your needs.

vm-enabled no
# vm-enabled yes

# This is the path of the Redis swap file. As you can guess, swap files
# can't be shared by different Redis instances, so make sure to use a swap
# file for every redis process you are running. Redis will complain if the
# swap file is already in use.
#
# The best kind of storage for the Redis swap file (that's accessed at random)
# is a Solid State Disk (SSD).
#
# *** WARNING *** if you are using a shared hosting the default of putting
# the swap file under /tmp is not secure. Create a dir with access granted
# only to Redis user and configure Redis to create the swap file there.
vm-swap-file /tmp/redis.swap

# vm-max-memory configures the VM to use at max the specified amount of
# RAM. Everything that deos not fit will be swapped on disk *if* possible, that
# is, if there is still enough contiguous space in the swap file.
#
# With vm-max-memory 0 the system will swap everything it can. Not a good
# default, just specify the max amount of RAM you can in bytes, but it's
# better to leave some margin. For instance specify an amount of RAM
# that's more or less between 60 and 80% of your free RAM.
vm-max-memory 0

# Redis swap files is split into pages. An object can be saved using multiple
# contiguous pages, but pages can't be shared between different objects.
# So if your page is too big, small objects swapped out on disk will waste
# a lot of space. If you page is too small, there is less space in the swap
# file (assuming you configured the same number of total swap file pages).
#
# If you use a lot of small objects, use a page size of 64 or 32 bytes.
# If you use a lot of big objects, use a bigger page size.
# If unsure, use the default :)
vm-page-size 32

# Number of total memory pages in the swap file.
# Given that the page table (a bitmap of free/used pages) is taken in memory,
# every 8 pages on disk will consume 1 byte of RAM.
#
# The total swap size is vm-page-size * vm-pages
#
# With the default of 32-bytes memory pages and 134217728 pages Redis will
# use a 4 GB swap file, that will use 16 MB of RAM for the page table.
#
# It's better to use the smallest acceptable value for your application,
# but the default is large in order to work in most conditions.
vm-pages 134217728

# Max number of VM I/O threads running at the same time.
# This threads are used to read/write data from/to swap file, since they
# also encode and decode objects from disk to memory or the reverse, a bigger
# number of threads can help with big objects even if they can't help with
# I/O itself as the physical device may not be able to couple with many
# reads/writes operations at the same time.
#
# The special value of 0 turn off threaded I/O and enables the blocking
# Virtual Memory implementation.
vm-max-threads 4

############################### ADVANCED CONFIG ###############################

# Hashes are encoded in a special way (much more memory efficient) when they
# have at max a given numer of elements, and the biggest element does not
# exceed a given threshold. You can configure this limits with the following
# configuration directives.
hash-max-zipmap-entries 512
hash-max-zipmap-value 64

# Similarly to hashes, small lists are also encoded in a special way in order
# to save a lot of space. The special representation is only used when
# you are under the following limits:
list-max-ziplist-entries 512
list-max-ziplist-value 64

# Sets have a special encoding in just one case: when a set is composed
# of just strings that happens to be integers in radix 10 in the range
# of 64 bit signed integers.
# The following configuration setting sets the limit in the size of the
# set in order to use this special memory saving encoding.
set-max-intset-entries 512
# Active rehashing uses 1 millisecond every 100 milliseconds of CPU time in
# order to help rehashing the main Redis hash table (the one mapping top-level
# keys to values). The hash table implementation redis uses (see dict.c)
# performs a lazy rehashing: the more operation you run into an hash table
# that is rhashing, the more rehashing "steps" are performed, so if the
# server is idle the rehashing is never complete and some more memory is used
# by the hash table.
#
# The default is to use this millisecond 10 times every second in order to
# active rehashing the main dictionaries, freeing memory when possible.
#
# If unsure:
# use "activerehashing no" if you have hard latency requirements and it is
# not a good thing in your environment that Redis can reply form time to time
# to queries with 2 milliseconds delay.
#
# use "activerehashing yes" if you don't have such hard requirements but
# want to free memory asap when possible.
activerehashing yes

################################## INCLUDES ###################################

# Include one or more other config files here. This is useful if you
# have a standard template that goes to all redis server but also need
# to customize a few per-server settings. Include files can include
# other files, so use this wisely.
#
# include /path/to/local.conf
# include /path/to/other.conf


四. 运行 Redis

1. 运行服务

/usr/local/redis/bin/redis-server /usr/local/redis/etc/redis.conf

即可在后台启动redis服务，确认运行了之后，可以用redis-benchmark命令测试看看，还可以通过redis-cli命令实际操作一下，比如：
/usr/local/redis/bin/redis-cli set foo bar

OK
/usr/local/redis/bin/redis-cli get foo

bar

2. 关闭服务

redis-cli shutdown

如果端口变化可以指定端口:
redis-cli -p 6380 shutdown

3. 保存/备份

数据备份可以通过定期备份该文件实现。

因为redis是异步写入磁盘的，如果要让内存中的数据马上写入硬盘可以执行如下命令：
redis-cli save 或者 redis-cli -p 6380 save（指定端口）

注意，以上部署操作需要具备一定的权限，比如复制和设定内核参数等。

执行redis-benchmark命令时也会将内存数据写入硬盘。

4. 同步机制

redis实现的同步机制相对简单，缺少同步机制常见的check point和校验机制。

在运行时，如果master -> slave同步请求转发被丢弃, slave将无法恢复该请求的相关信息，直到slave重启时从master全量加载数据时才能修复。因此，建议使用redis尽量利用其key/value和value支持多种类型的特性，存储一些相对不重要的数据。

 
redis的php扩展安装
到http://redis.io/clients上下载php的扩展（https://github.com/nicolasff/phpredis）

unzip解压文件，cd到文件目录下

然后执行

/usr/local/php/bin/phpize

./configure --with-php-config=/usr/local/php/bin/php-config

make && make install
php.ini中添加extension=redis.so，任何重启PHP的php-fpm服务。

编写PHP测试页，测试php和redis是否能协同工作。