Nginx+mysql+php-fpm搭建高性能Nginx平台

Nginx平台搭建：Nginx+mysql+php-fpm搭建高性能Nginx平台

单Nginx负载均衡：Nginx 负载均衡 配置全过程
熟悉上面的配置之后，今天我再来搞Nginx + Keepalived 的配置，具体拓扑如下：



两台前端Nginx，任意一台挂了另一台会接管岩机Nginx的虚拟Ip，前面还可以做一个DNS轮询，没在线上环境跑过，不知性能如何勒！
一、安装Keepalived

ln -s /usr/src/kernels/2.6.18-194.el5-i686/ /usr/src/linux tar zxvf keepalived-1.1.15.tar.gz cd keepalived-1.1.15 ./configure --prefix=/usr/local/keepalived make make install cp /usr/local/keepalived/etc/rc.d/init.d/keepalived /etc/rc.d/init.d/ cp /usr/local/keepalived/etc/sysconfig/keepalived /etc/sysconfig/ mkdir /etc/keepalived cp /usr/local/keepalived/etc/keepalived/keepalived.conf /etc/keepalived/ #主配置文件 cp -v /usr/local/keepalived/sbin/keepalived /usr/sbin/ service keepalived start|stop #启动、停止服务

二、配置Keepalived
/etc/keepalived/keepalived.conf

! Configuration File for keepalived global_defs { notification_email { acassen@firewall.loc failover@firewall.loc sysadmin@firewall.loc } notification_email_from Alexandre.Cassen@firewall.loc smtp_server 192.168.200.1 smtp_connect_timeout 30 router_id LVS_DEVEL } vrrp_script chk_nginx { script "/usr/local/keepalived/check_http.sh" interval 2 weight 2 } vrrp_instance VI_1 { state MASTER interface eth0 virtual_router_id 51 #同一个vrrp_instance，这个ID要相同 priority 100 #同一个vrrp_instance，这个值master要大于backup advert_int 1 authentication { auth_type PASS auth_pass 123456 } track_script { chk_nginx } virtual_ipaddress { 192.168.93.144 #定义vip，也就是对外IP，可以写多个（换行） } } vrrp_instance VI_2 { state BACKUP interface eth0 virtual_router_id 52 priority 50 advert_int 1 authentication { auth_type PASS auth_pass 123456 } virtual_ipaddress { 192.168.93.145 } }

global_defs 是全局配置，定义邮件报警，我无视它了。
vrrp_script 定义一个监控脚本，作用：发现Nginx挂了，马上关掉keepalived
vrrp_instance 定义一个虚拟IP，对外服务的，其中还有个track_script ，这个就是调用刚才定义的监控脚本
另外一台前端Nginx的Keepalived配置如下：

! Configuration File for keepalived global_defs { notification_email { acassen@firewall.loc failover@firewall.loc sysadmin@firewall.loc } notification_email_from Alexandre.Cassen@firewall.loc smtp_server 192.168.200.1 smtp_connect_timeout 30 router_id LVS_DEVEL } vrrp_script chk_nginx { script "/usr/local/keepalived/check_http.sh" interval 2 weight 2 } vrrp_instance VI_1 { state BACKUP interface eth0 virtual_router_id 51 priority 50 advert_int 1 authentication { auth_type PASS auth_pass 123456 } virtual_ipaddress { 192.168.93.144 } } vrrp_instance VI_2 { state MASTER interface eth0 virtual_router_id 52 priority 100 advert_int 1 authentication { auth_type PASS auth_pass 123456 } track_script { chk_nginx } virtual_ipaddress { 192.168.93.145 } }

另外监控脚本check_http.sh可以自己发挥，原则就是发现Nginx挂了就杀掉keepalived就行，写法多种

pid=`ps -C nginx --no-header | wc -l` if [ $pid -eq 0 ] then /usr/local/nginx/sbin/nginx sleep 5 newpid=`ps -C nginx --no-header | wc -l` if [ $newpid -eq 0 ] then killall keepalived fi fi

Nginx的配置就不多说
启动服务

/usr/local/nginx/sbin/nginx service keepalived start ps -aef | grep keepalived root 28742 3288 0 03:21 pts/1 00:00:00 grep keepalived root 31674 1 0 Oct31 ? 00:00:00 keepalived -D root 31676 31674 0 Oct31 ? 00:00:00 keepalived -D root 31677 31674 0 Oct31 ? 00:00:02 keepalived -D

三、测试
主Nginx

ip add 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000 link/ether 00:0c:29:e0:a3:bf brd ff:ff:ff:ff:ff:ff inet 192.168.93.137/24 brd 192.168.93.255 scope global eth0 inet 192.168.93.144/32 scope global eth0 inet6 fe80::20c:29ff:fee0:a3bf/64 scope link valid_lft forever preferred_lft forever

备Nginx

ip add 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000 link/ether 00:0c:29:ee:a6:22 brd ff:ff:ff:ff:ff:ff inet 192.168.93.138/24 brd 192.168.93.255 scope global eth0 inet 192.168.93.145/32 scope global eth0 inet6 fe80::20c:29ff:feee:a622/64 scope link valid_lft forever preferred_lft foreve

我把主Nginx服务停掉之后：
主Nginx

ip add 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000 link/ether 00:0c:29:e0:a3:bf brd ff:ff:ff:ff:ff:ff inet 192.168.93.137/24 brd 192.168.93.255 scope global eth0 inet6 fe80::20c:29ff:fee0:a3bf/64 scope link valid_lft forever preferred_lft forever

备Nginx

ip add 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000 link/ether 00:0c:29:ee:a6:22 brd ff:ff:ff:ff:ff:ff inet 192.168.93.138/24 brd 192.168.93.255 scope global eth0 inet 192.168.93.145/32 scope global eth0 inet 192.168.93.144/32 scope global eth0 inet6 fe80::20c:29ff:feee:a622/64 scope link valid_lft forever preferred_lft forever

备机已经接管了主的ip，然后再把主机的服务恢复：
主Nginx

ip add 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000 link/ether 00:0c:29:e0:a3:bf brd ff:ff:ff:ff:ff:ff inet 192.168.93.137/24 brd 192.168.93.255 scope global eth0 inet 192.168.93.144/32 scope global eth0 inet6 fe80::20c:29ff:fee0:a3bf/64 scope link valid_lft forever preferred_lft forever

备Nginx

ip add 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000 link/ether 00:0c:29:ee:a6:22 brd ff:ff:ff:ff:ff:ff inet 192.168.93.138/24 brd 192.168.93.255 scope global eth0 inet 192.168.93.145/32 scope global eth0 inet6 fe80::20c:29ff:feee:a622/64 scope link valid_lft forever preferred_lft forever

配置完成！

本文出自 “蜗牛的家” 博客，请务必保留此出处http://winters.blog.51cto.com/5617866/1091979