网络安装Centos redhat及rhel5.3的ks安装
2010-07-17 10:37
316 查看
[align=center]网络安装[/b]Centos redhat[/b]及[/b]rhel5.3[/b]的[/b]ks[/b]安装[/b][/b][/align]
一、软件准备
本安装使用用http方式进行所以下载apache并在windows下实现安装
Syslinux下载地址:
http://ftp.ntu.edu.tw/linux/boot/syslinux/2.xx/
tftpd下载地址:
http://tftpd32.jounin.net/tftpd32_download.html
二、创建一个tftp-install
1)把解压后的tfpd文件复制至tftp-install
解压后的syslinux下的pxelinux.0复制至tftp-install
创建pxelinux.cfg bootload目录
目录结构如下图
2)在pxelinux.cfg目录下创建default list 两文件
Default文件内容如下:
DEFAULT centos5.4
DISPLAY pxelinux.cfg/list
PROMPT 1
LABEL centos5.4
kernel /bootload/centos5.4/vmlinuz
append initrd=/bootload/centos5.4/initrd.img
LABEL rhel5.3
kernel /bootload/redhat5.3/vmlinuz
append initrd=/bootload/redhat5.3/initrd.img
LABEL rhel4
kernel /bootload/redhat4/vmlinuz
append initrd=/bootload/redhat4/initrd.img
list文件内容如下:
Choose one of the following Linux distributions for your installation:
Name Distribution Arch. Installation media
-------------------------------------------------------------------------
centos5.4 32bit i386
rhel5.3 32bit i386
rhel4 32bit i386
type the targe as centos5.4 or rhel5.3 or rhel4 and next to install the os ,glod bless!
三、在bootload目录下创建centos5.4之类的存放引导文件的目录
如该目录的centos5.4里面放置的文件是从centos5.4光盘中的isolinux目录文件
四、ftp工具设置
1) 开启tftp设置如下图server interface 为本机ip
Ip pool设置与本机ip同一网段
Boot file 为pxelinux.0
如有多IP点界面的settings设置下bind dhcp与bind tftp
五、apache设置下面是我设置的两个安装目录
Alias /rhel5.3 "D:/OS/RedHat/rhel-server-5.3-i386-dvd"
<Directory "D:/OS/RedHat/rhel-server-5.3-i386-dvd">
Options MultiViews
AllowOverride None
Order allow,deny
Allow from all
</Directory>
Alias /rhel4 "D:/OS/RedHat/RHEL4-U4-i386-AS-disc1"
<Directory "D:/OS/RedHat/RHEL4-U4-i386-AS-disc1">
Options MultiViews
AllowOverride None
Order allow,deny
Allow from all
</Directory>
六、系统安装
设置需要安装系统的机器网络启动
正在获取ip
获取到ip并进入到引导界面
此时输入前面设置的引导字符即可如上面的rhel5.3或centos5.4或rhel4三种操作系统标签回车后进入引导安装
进入到下图界面时选择http安装
设置http的路径
七、kickstart安装实现
1)可以使用已经安装好的系统例如centos或rhel我这边是使用已安装好的rhel5.3系统文件/root/anaconda-ks.cfg,下载过来修改修改即可
保存文件名为ks.cfg,内容如下
# Kickstart file automatically generated by anaconda.
install
url --url http://192.168.203.1/rhel5.3 key --skip
lang en_US.UTF-8
keyboard us
network --device eth0 --bootproto dhcp
rootpw --iscrypted $1$ogcIyWqR$zM.sgu7CxUCY2NZOjc1460 #密码为123456
firewall --enabled --port=2222:tcp #端口号改变
authconfig --enableshadow --enablemd5
selinux –disabled #selinux关闭
timezone --utc Asia/Shanghai
bootloader --location=mbr --driveorder=sda
# The following is the partition information you requested
# Note that any partitions you deleted are not expressed
# here so unless you clear all partitions first, this is
# not guaranteed to work
#下面是使用的经典分区,当然你可以先在一台机器上划好分区后拿来套用
clearpart --linux --drives=sda
part /boot --fstype ext3 --size=100 --ondisk=sda
part swap --size=1024
part / --fstype ext3 --size=100 --grow
#选择需要安装的软件包
%packages
@development-libs
@text-internet
@core
@base
@admin-tools
@development-tools
kexec-tools
fipscheck
device-mapper-multipath
imake
#安装后的一些处理,把ssh的端口号改变,及相关不需要的服务关闭,如果有其它要求自己也可以添加下
%post
/bin/sed -i 's/#Port 22/Port 2222/' /etc/ssh/sshd_config
/sbin/chkconfig yum-updatesd off
/sbin/chkconfig sendmail off
/sbin/chkconfig rpcidmapd off
/sbin/chkconfig rpcgssd off
/sbin/chkconfig portmap off
/sbin/chkconfig nfslock off
/sbin/chkconfig ip6tables off
/sbin/chkconfig bluetooth off
/sbin/chkconfig autofs off
2) 脚本已经准备OK了下面对网络安装的default文件进行修改
把原来的
append initrd=/bootload/redhat5.3/initrd.img
改成:
append ks=http://192.168.203.1/rhel5.3/ks.cfg initrd=/bootload/redhat5.3/initrd.img
参与文章:http://www.ibm.com/developerworks/cn/linux/l-autoinstl/
公司网络限制上传文件了,回头补个附件
一、软件准备
本安装使用用http方式进行所以下载apache并在windows下实现安装
Syslinux下载地址:
http://ftp.ntu.edu.tw/linux/boot/syslinux/2.xx/
tftpd下载地址:
http://tftpd32.jounin.net/tftpd32_download.html
二、创建一个tftp-install
1)把解压后的tfpd文件复制至tftp-install
解压后的syslinux下的pxelinux.0复制至tftp-install
创建pxelinux.cfg bootload目录
目录结构如下图
2)在pxelinux.cfg目录下创建default list 两文件
Default文件内容如下:
DEFAULT centos5.4
DISPLAY pxelinux.cfg/list
PROMPT 1
LABEL centos5.4
kernel /bootload/centos5.4/vmlinuz
append initrd=/bootload/centos5.4/initrd.img
LABEL rhel5.3
kernel /bootload/redhat5.3/vmlinuz
append initrd=/bootload/redhat5.3/initrd.img
LABEL rhel4
kernel /bootload/redhat4/vmlinuz
append initrd=/bootload/redhat4/initrd.img
list文件内容如下:
Choose one of the following Linux distributions for your installation:
Name Distribution Arch. Installation media
-------------------------------------------------------------------------
centos5.4 32bit i386
rhel5.3 32bit i386
rhel4 32bit i386
type the targe as centos5.4 or rhel5.3 or rhel4 and next to install the os ,glod bless!
三、在bootload目录下创建centos5.4之类的存放引导文件的目录
如该目录的centos5.4里面放置的文件是从centos5.4光盘中的isolinux目录文件
四、ftp工具设置
1) 开启tftp设置如下图server interface 为本机ip
Ip pool设置与本机ip同一网段
Boot file 为pxelinux.0
如有多IP点界面的settings设置下bind dhcp与bind tftp
五、apache设置下面是我设置的两个安装目录
Alias /rhel5.3 "D:/OS/RedHat/rhel-server-5.3-i386-dvd"
<Directory "D:/OS/RedHat/rhel-server-5.3-i386-dvd">
Options MultiViews
AllowOverride None
Order allow,deny
Allow from all
</Directory>
Alias /rhel4 "D:/OS/RedHat/RHEL4-U4-i386-AS-disc1"
<Directory "D:/OS/RedHat/RHEL4-U4-i386-AS-disc1">
Options MultiViews
AllowOverride None
Order allow,deny
Allow from all
</Directory>
六、系统安装
设置需要安装系统的机器网络启动
正在获取ip
获取到ip并进入到引导界面
此时输入前面设置的引导字符即可如上面的rhel5.3或centos5.4或rhel4三种操作系统标签回车后进入引导安装
进入到下图界面时选择http安装
设置http的路径
七、kickstart安装实现
1)可以使用已经安装好的系统例如centos或rhel我这边是使用已安装好的rhel5.3系统文件/root/anaconda-ks.cfg,下载过来修改修改即可
保存文件名为ks.cfg,内容如下
# Kickstart file automatically generated by anaconda.
install
url --url http://192.168.203.1/rhel5.3 key --skip
lang en_US.UTF-8
keyboard us
network --device eth0 --bootproto dhcp
rootpw --iscrypted $1$ogcIyWqR$zM.sgu7CxUCY2NZOjc1460 #密码为123456
firewall --enabled --port=2222:tcp #端口号改变
authconfig --enableshadow --enablemd5
selinux –disabled #selinux关闭
timezone --utc Asia/Shanghai
bootloader --location=mbr --driveorder=sda
# The following is the partition information you requested
# Note that any partitions you deleted are not expressed
# here so unless you clear all partitions first, this is
# not guaranteed to work
#下面是使用的经典分区,当然你可以先在一台机器上划好分区后拿来套用
clearpart --linux --drives=sda
part /boot --fstype ext3 --size=100 --ondisk=sda
part swap --size=1024
part / --fstype ext3 --size=100 --grow
#选择需要安装的软件包
%packages
@development-libs
@text-internet
@core
@base
@admin-tools
@development-tools
kexec-tools
fipscheck
device-mapper-multipath
imake
#安装后的一些处理,把ssh的端口号改变,及相关不需要的服务关闭,如果有其它要求自己也可以添加下
%post
/bin/sed -i 's/#Port 22/Port 2222/' /etc/ssh/sshd_config
/sbin/chkconfig yum-updatesd off
/sbin/chkconfig sendmail off
/sbin/chkconfig rpcidmapd off
/sbin/chkconfig rpcgssd off
/sbin/chkconfig portmap off
/sbin/chkconfig nfslock off
/sbin/chkconfig ip6tables off
/sbin/chkconfig bluetooth off
/sbin/chkconfig autofs off
2) 脚本已经准备OK了下面对网络安装的default文件进行修改
把原来的
append initrd=/bootload/redhat5.3/initrd.img
改成:
append ks=http://192.168.203.1/rhel5.3/ks.cfg initrd=/bootload/redhat5.3/initrd.img
参与文章:http://www.ibm.com/developerworks/cn/linux/l-autoinstl/
公司网络限制上传文件了,回头补个附件
相关文章推荐
- 网络安装CentOS 5.3
- rhel5.3服务器安装centOS的yum源
- rhel5.3服务器安装centOS的yum源
- 在CentOS 5/RedHat Enterprise 5.3上编译安装GeoIP
- 网络安装CentOS 5.3
- rhel 5.3 CentOS 5.3 安装oracle 10g 心得。
- RHEL(redhat 5.x,6.x)和CentOS上Gitlab安装全过程
- RedHat/CentOS 最小化安装模式下安装网络等工具
- 网络安装CentOS 5.3
- 基于CentOS5.3平台PXE网络分发安装Linux步骤记录 推荐
- rhel5.3服务器安装centOS的yum源
- Redhat/CentOS全自动网络安装
- Oracle11gR2 在 Linux CentOS 5.3,RHEL 5.4 上的安装 <转>
- redhat(rhel)用CentOS的yum源更新/安装软件 推荐
- Redhat 7.0安装CentOS 7 的Yum 网络源
- 最新Mysql-5.1.35在RHEL5.3(CentOS5.3)编译安装步骤
- 尝试在centos 5.3和rhel 5.3下安装samba
- Oracle11gR2 在 Linux CentOS 5.3,RHEL 5.4 上的安装 &lt;转&gt;
- 【RedHat】RHEL5.3-FTP—vsftpd服务安装和配置
- rhel 5.3 CentOS 5.3 安装oracle 10g 心得。