SD--对于定价过程参考步骤 (Condition Step)(T683S-STUNB and T683S-STUN2)的使用代码分析

1)概述

 对于参考步骤 (Condition Step)(T683S-STUNB and T683S-STUN2)的使用代码分析
 SAP对定价过程中的从参考步骤(T683S-STUNB)和到参考步骤T683S-STUN2)的使用分两种情况：无条件类型的小计项目和有条件计算项目。
在LV61AA55单元会根据定价过程生成的xkomv内表来循环计算各项值
*LOOP
  loop at xkomv.
* calculate condition basis(有条件计算项目)，(162行),调用konditionsbasis_ermitteln子过程填写kawrt(条件基值),供后续项目计算使用
          perform konditionsbasis_ermitteln.
.....
* scale basis changed or 0
* KON-KBETR should not be there if scale basis is 0
             ( ( xkstbs ne ykstbs ) or xkstbs eq 0 ) and
             xkomv-kmprs is initial   and
             xkomv-ksteu eq 'A'.
            perform xkomv_kbetr_aus_staffel.
          endif.
          if xkomv-krech na absolute or xkomv-kgrpe ne 'X'.
            perform xkomv_kwert_ermitteln.
          endif.
        endif.
      else.
        if xkomv-kschl eq space."
*(无条件类型的小计项目),调用xkomv_kwert_ermitteln子过程直接将汇总填写到小计项目的kwert字段
          perform xkomv_kwert_ermitteln.
        endif.
      endif.
.....
　endloop.
2)无条件类型的小计项目计算代码分析
xkomv_kwert_ermitteln代码参见单元LV61AA43的下列代码，这段代码会调用子过程xkomv_kawrt_ermitteln将相应定价项目的字段(kwert)汇总填写到小计项目的kwert字段，参见红色部分。
FORM xkomv_kwert_ermitteln.
  DATA: xkbetr(16) TYPE p DECIMALS 2.
  DATA: cond_curr_is_euro, doc_curr_is_euro.
* sum line owning reference step
  IF xkomv-kschl = space AND xkomv-stunb NE 0.
    CATCH SYSTEM-EXCEPTIONS conversion_errors = 1
                            arithmetic_errors = 5.
      PERFORM xkomv_kawrt_ermitteln.
      xkomv-kwert = xkawrt.
    ENDCATCH.
    IF sy-subrc = 1 OR sy-subrc = 5.
      MESSAGE s802.
      xkomv-kinak = 'X'.
      xkomv-kwert = 0.
      xkomv-fxmsg = '802'.
      komp-fxmsg  = '802'.
    ENDIF.
* no calculation for KDUPL conditions because condition value is
* calculated by formula 36.
  ELSEIF xkomv-kdupl NE 'B'.
3)有条件计算项目代码分析
konditionsbasis_ermitteln代码参见单元LV61AA74的下列代码，这段代码会调用子过程xkomv_kawrt_ermitteln将相应定价项目的字段(kwert)汇总填写到小计项目的kawrt(条件基值),参见红色部分。
form konditionsbasis_ermitteln.
  data: da_xxmglme like komp-brgew,
        da_xxmeins like komp-gewei,
        da_fxmsg   like xkomv-fxmsg.
  data: arbfeld_dec(16) type p decimals 3.
  xkomv-kawrt = 0.
  if xkomv-krech ca prz_abs and not xkomv-krech = 'T'.
    if xkomv-stunb ne 0 or xkomv-stun2 ne 0 or xkomv-koaid = 'D'.
      perform xkomv_kawrt_ermitteln.
      xkomv-kawrt = xkawrt.
    endif.
    if xkomv-stunb = 0 and xkomv-stun2 = 0.
      xkomv-kawrt = zwisu.
    endif.
  endif.

4)循环合计子过程代码的摘抄，参见红色部分

form xkomv_kawrt_ermitteln.

  data:  axkomv like komv.

* assign & initialize
  axkomv = xkomv.
  xkawrt = 0.

* set from - to step number comming form pricing procedure
  xstunr = xkomv-stunb.
  xstun2 = xkomv-stun2.
  if xstun2 lt xstunr.
    xstun2 = xstunr.
  endif.
  if xstun2 = 0.
    xstun2 = xkomv-stunr.
  endif.

* build up key to read XKOMV table
  komv_key-mandt = komk-mandt.
  komv_key-knumv = komk-knumv.
  komv_key-kposn = komp-kposn.
  komv_key-stunr = xstunr.
  komv_key-zaehk = 0.
  read table xkomv with key komv_key binary search.
  if sy-subrc lt 8.
    read table xkomv index sy-tabix.
    if xkomv-stunr gt xstun2.
      read table xkomv index xkomv_tabix.
      xkomv = axkomv.
      exit.
    else.
      loop at xkomv.
        if xkomv-stunr gt xstun2 or sy-tabix = xkomv_tabix.
          read table xkomv index xkomv_tabix.
          xkomv = axkomv.
          exit.
        endif.
        if ( xkomv-stunr ge xstunr and xkomv-stunr le xstun2 )  and
             xkomv-kinak na 'AKLMX'.
          add xkomv-kwert to xkawrt.
        endif.
      endloop.
    endif.
  endif.

  if xkomv_tabix ne 0.
    read table xkomv index xkomv_tabix.
  endif.
  xkomv = axkomv.

endform.