如何使用.NET配置文件(转载)
2005-09-08 09:48
756 查看
.NET的应用程序配置文件,使用的是XML格式。相对INI文件来说,它的功能要强上不少,而且具有很强的可扩展性。它的缺点是不能直接进行写操作,也就是说,不能直接在程序中修改配置文件的数据(当然不是指不能,不过不是本文讨论的范围)。本文主要目的是探讨如何扩展配置文件,并在其加入各种自定义配置信息。
1. 使用
简单的配置信息,可以直接放入标记中。如:
<appSettings>
<add key="LogFile" value="d:\log\debug.log"/>
< SPAN>appSettings>
< SPAN>configuration>
相应访问代码如下:
string fileName = System.Configuration.ConfigurationSettings.AppSettings.Get("LogFile");
2. 自定义配置节(section)名称
比如,我们要使用下面的配置结构,将配置信息归类分组:
<configuration>
<myConfig>
<myDictionary>
<add key="Area" value="Fuzhou"/>
<add key="Device" value="Printer"/>
<add key="Customer" value="Muf"/>
< SPAN>myDictionary>
<myNameValue>
<add key="Area" value="Fuzhou"/>
<add key="Device" value="Printer"/>
<add key="Customer" value="Muf"/>
< SPAN>myNameValue>
<myInfo
Area="Fuzhou" Device="Printer" Customer="Muf"
/>
< SPAN>myConfig>
< SPAN>configuration>
但是光这样子说明是不行的。没有声明,是不能使用自定义的配置段。我们必须要在配置文件前面加入声明:
<configSections>
<sectionGroup name="myConfig">
<section name="myDictionary"
type="System.Configuration.NameValueSectionHandler, System, Version=1.0.3300.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="myNameValue"
type="System.Configuration.DictionarySectionHandler, System, Version=1.0.3300.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="myInfo"
type="System.Configuration.SingleTagSectionHandler, System, Version=1.0.3300.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
< SPAN>sectionGroup>
< SPAN>configSections>
声明和配置的关系,示意图如下:
由图上可以看出,NameValueSectionHandler和DictionarySectionHandler在定义配置文件的内容形式上是一样的,都是用来设置内容的。只是返回到C#中的类不太一样,可以参考下面的代码示例。
另外,如果不关心Handler类的版本等信息,可以直接省略。如NameValueSectionHandler可以直接如下声明:
<section name="myDictionary" type="System.Configuration.NameValueSectionHandler, System" />
把上面的声明段放入配置文件中,我们的配置结构就可以正常使用了。声明中,用来定义不含配置数据的节的名称。用来定义含有自定义配置数据的节的名称。用来指定定义配置数据的类型。.NET已经定义了3种配置类型:
a. NameValueSectionHandler
相应访问代码如下:
NameValueCollection myNameValue= (NameValueCollection)System.Configuration.ConfigurationSettings.AppSettings.Get(@"myConfig\myNameValue");
string Area = myNameValue["Area"];
string Device= myNameValue["Device"];
string Customer = myNameValue["Customer "];
b. DictionarySectionHandler
相应访问代码如下:
Hashtable myNameValue= (Hashtable)System.Configuration.ConfigurationSettings.AppSettings.Get(@"myConfig\myDictionary");
string Area = myNameValue["Area"];
string Device= myNameValue["Device"];
string Customer = myNameValue["Customer "];
c. SingleTagSectionHandler
相应访问代码如下:
Hashtable myNameValue= (Hashtable)System.Configuration.ConfigurationSettings.AppSettings.Get(@"myConfig\myInfo");
string Area = myNameValue["Area"];
string Device= myNameValue["Device"];
string Customer = myNameValue["Customer "];
这三种类型的详细信息,可以参考 MSDN 文档。同时.NET 还定义了IgnoreSectionHandler类型,为 System.Configuration 之外的系统所读取和处理的配置节提供节处理程序定义。
除此之外,.NET提供了IConfigurationSectionHandler接口,这样我们还可以自行进行扩展,以设计出我们自已的配置形式。
3. 自定义配置结构 (使用IConfigurationSectionHandler)
假设有以下的配置信息,其在MyInfo可以重复许多次,那么应如何读取配置呢?这时就要使用自定义的配置程序了。
<myConfigs>
<myInfo Area="Fuzhou" Device="Printer" Customer="Muf" />
<myInfo Area="Shanghai" Device="Mobile" Customer="Liny" />
< SPAN>myConfig>
访问代码如下:
Hashtable cfgTable = (Hashtable)ConfigurationSettings.GetConfig( "myConfigs" );
Debug.Assert( cfgTable.Count == 2);
Hashtable cfgFuzhou = (Hashtable)cfgTable["Fuzhou"];
Hashtable cfgShanghai = (Hashtable)cfgTable["Shanghai"];
Debug.Assert( cfgFuzhou["Device"] == "Printer" );
Debug.Assert( cfgShanghai["Device"] == "Mobile" );
Debug.Assert( cfgFuzhou["Customer"] == "Muf" );
Debug.Assert( cfgShanghai["Customer"] == "Liny" );
foreach(Hashtable cfg in cfgTable.Values)
为了能使用上面的访问代码来访问配置结构,我们需要生成一个特定的配置读取类(ConfigurationSectionHandler),例子很简单,就不多做说明了:
public class MyInfoSectionHandler: IConfigurationSectionHandler
然后,我们再定义配置说明。其中,myNamespace.MyInfoSectionHandler 是MyInfoSectionHandler类的带名字空间的完整名称;myApp 则是定义MyInfoSectionHandler类的程序集不带扩展名的名字(如myApp.dll或myApp.exe):
<configuration>
<configSections>
<section name="myConfig" type="myNamespace.MyInfoSectionHandler, myApp" />
< SPAN>configSections>
<myConfigs>
<myInfo Area="Fuzhou" Device="Printer" Customer="Muf" />
<myInfo Area="Shanghai" Device="Mobile" Customer="Liny" />
< SPAN>myConfig>
< SPAN>configuration>
根据上面的例子,我们可以使用IConfigurationSectionHandler来实现任意的配置文件结构。
1. 使用
简单的配置信息,可以直接放入标记中。如:
<appSettings>
<add key="LogFile" value="d:\log\debug.log"/>
< SPAN>appSettings>
< SPAN>configuration>
相应访问代码如下:
string fileName = System.Configuration.ConfigurationSettings.AppSettings.Get("LogFile");
2. 自定义配置节(section)名称
比如,我们要使用下面的配置结构,将配置信息归类分组:
<configuration>
<myConfig>
<myDictionary>
<add key="Area" value="Fuzhou"/>
<add key="Device" value="Printer"/>
<add key="Customer" value="Muf"/>
< SPAN>myDictionary>
<myNameValue>
<add key="Area" value="Fuzhou"/>
<add key="Device" value="Printer"/>
<add key="Customer" value="Muf"/>
< SPAN>myNameValue>
<myInfo
Area="Fuzhou" Device="Printer" Customer="Muf"
/>
< SPAN>myConfig>
< SPAN>configuration>
但是光这样子说明是不行的。没有声明,是不能使用自定义的配置段。我们必须要在配置文件前面加入声明:
<configSections>
<sectionGroup name="myConfig">
<section name="myDictionary"
type="System.Configuration.NameValueSectionHandler, System, Version=1.0.3300.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="myNameValue"
type="System.Configuration.DictionarySectionHandler, System, Version=1.0.3300.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="myInfo"
type="System.Configuration.SingleTagSectionHandler, System, Version=1.0.3300.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
< SPAN>sectionGroup>
< SPAN>configSections>
声明和配置的关系,示意图如下:
由图上可以看出,NameValueSectionHandler和DictionarySectionHandler在定义配置文件的内容形式上是一样的,都是用来设置内容的。只是返回到C#中的类不太一样,可以参考下面的代码示例。
另外,如果不关心Handler类的版本等信息,可以直接省略。如NameValueSectionHandler可以直接如下声明:
<section name="myDictionary" type="System.Configuration.NameValueSectionHandler, System" />
把上面的声明段放入配置文件中,我们的配置结构就可以正常使用了。声明中,用来定义不含配置数据的节的名称。用来定义含有自定义配置数据的节的名称。用来指定定义配置数据的类型。.NET已经定义了3种配置类型:
a. NameValueSectionHandler
相应访问代码如下:
NameValueCollection myNameValue= (NameValueCollection)System.Configuration.ConfigurationSettings.AppSettings.Get(@"myConfig\myNameValue");
string Area = myNameValue["Area"];
string Device= myNameValue["Device"];
string Customer = myNameValue["Customer "];
b. DictionarySectionHandler
相应访问代码如下:
Hashtable myNameValue= (Hashtable)System.Configuration.ConfigurationSettings.AppSettings.Get(@"myConfig\myDictionary");
string Area = myNameValue["Area"];
string Device= myNameValue["Device"];
string Customer = myNameValue["Customer "];
c. SingleTagSectionHandler
相应访问代码如下:
Hashtable myNameValue= (Hashtable)System.Configuration.ConfigurationSettings.AppSettings.Get(@"myConfig\myInfo");
string Area = myNameValue["Area"];
string Device= myNameValue["Device"];
string Customer = myNameValue["Customer "];
这三种类型的详细信息,可以参考 MSDN 文档。同时.NET 还定义了IgnoreSectionHandler类型,为 System.Configuration 之外的系统所读取和处理的配置节提供节处理程序定义。
除此之外,.NET提供了IConfigurationSectionHandler接口,这样我们还可以自行进行扩展,以设计出我们自已的配置形式。
3. 自定义配置结构 (使用IConfigurationSectionHandler)
假设有以下的配置信息,其在MyInfo可以重复许多次,那么应如何读取配置呢?这时就要使用自定义的配置程序了。
<myConfigs>
<myInfo Area="Fuzhou" Device="Printer" Customer="Muf" />
<myInfo Area="Shanghai" Device="Mobile" Customer="Liny" />
< SPAN>myConfig>
访问代码如下:
Hashtable cfgTable = (Hashtable)ConfigurationSettings.GetConfig( "myConfigs" );
Debug.Assert( cfgTable.Count == 2);
Hashtable cfgFuzhou = (Hashtable)cfgTable["Fuzhou"];
Hashtable cfgShanghai = (Hashtable)cfgTable["Shanghai"];
Debug.Assert( cfgFuzhou["Device"] == "Printer" );
Debug.Assert( cfgShanghai["Device"] == "Mobile" );
Debug.Assert( cfgFuzhou["Customer"] == "Muf" );
Debug.Assert( cfgShanghai["Customer"] == "Liny" );
foreach(Hashtable cfg in cfgTable.Values)
为了能使用上面的访问代码来访问配置结构,我们需要生成一个特定的配置读取类(ConfigurationSectionHandler),例子很简单,就不多做说明了:
public class MyInfoSectionHandler: IConfigurationSectionHandler
然后,我们再定义配置说明。其中,myNamespace.MyInfoSectionHandler 是MyInfoSectionHandler类的带名字空间的完整名称;myApp 则是定义MyInfoSectionHandler类的程序集不带扩展名的名字(如myApp.dll或myApp.exe):
<configuration>
<configSections>
<section name="myConfig" type="myNamespace.MyInfoSectionHandler, myApp" />
< SPAN>configSections>
<myConfigs>
<myInfo Area="Fuzhou" Device="Printer" Customer="Muf" />
<myInfo Area="Shanghai" Device="Mobile" Customer="Liny" />
< SPAN>myConfig>
< SPAN>configuration>
根据上面的例子,我们可以使用IConfigurationSectionHandler来实现任意的配置文件结构。
相关文章推荐
- 如何使用.NET配置文件(转载)
- 如何使用.NET配置文件(一)
- 如何使用.NET配置文件
- 如何使用.NET配置文件(二)
- 如何使用.NET配置文件(一)
- 【转】如何使用.NET配置文件(一)
- 【转】如何使用.NET配置文件(一)
- 转载:如何使用XCodeFactory自动生成XML配置文件和对应的解析类
- 如何使用.NET配置文件(二)
- 如何使用.NET配置文件
- 如何使用.NET配置文件
- 【转】如何使用.NET配置文件by沐枫小筑
- 【转】如何使用.NET配置文件(一)
- 如何使用.NET配置文件
- 如何使用.NET配置文件(二)
- 如何使用.NET配置文件
- 如何使用.NET配置文件(一)
- 如何使用.NET配置文件
- .net如何自定义config配置文件节点
- tomcat下多个web应用使用相同的log4j的jar包,如何避免配置文件发生冲突