Apache + Jboss3.0.7 + Tomcat4.1.x (for win2000 pro)配置

Apache + Jboss3.0.7 + Tomcat4.1.x (for win2000 pro)配置
一．安装
条件：(所有软件版本很关键，请按列出的版本安装成功再更换其它版本)
Apache:apache_2.0.48-win32-x86-no_ssl.msi(http://apache.linuxforum.net/dist/httpd/binaries/win32/apache_2.0.48-win32-x86-no_ssl.msi)

Jboss:jboss-3.0.7_jakarta-tomcat-4.1.24(两者集成版，网上找找，会有的)

Mod_jk:mod_jk_1.2.5_2.0.47.dll(http://apache.linuxforum.net/dist/jakarta/tomcat-connectors/jk/binaries/win32/mod_jk_1.2.5_2.0.47.dll)

二．配置Apache与Mod_jk
copy mod_jk_1.2.5_2.0.47.dll 文件至 apache_install_dir/modules
编辑apache_install_dir/conf/httpd.conf文件,在最后一行加入

#--------------------------begin------------------
LoadModule jk_module modules/mod_jk_1.2.5_2.0.47.dll

<IfModule mod_jk.c>
JKWorkersFile "C:/Apache2/conf/workers.properties"
JKLogFile "C:/Apache2/logs/jk.log"
JKLogLevel normal
JKMount /*.jsp lb
</IfModule>

#------------------------end---------------------

我的apache装在C:/Apache2目录下
要注意JKMount /*.jsp lb，如果此处写成JKMount /* lb，将所有的文件将直接转到jboss发布目录去搜索，我们这里的设置只过滤jsp文件，其它文件还是去apachel配置的DocumentRoot路径里找，所以我还要设置DocumentRoot，之所以这样作是为了我们能够使用apache的alias别名功能。

找到DocumentRoot "C:/Apache2/htdocs"行，把它改为：
DocumentRoot "C:/jboss-3.0.7_jakarta-tomcat-4.1.24/server/all/deploy/mms.war"

如果要使用servlet，可以加上JKMount /servlets/* lb,当然还要在web.xml里的servlet 的url都改为如
<servlet>
<servlet-name>MyServlet</servlet-name>
<servlet-class>com.common.ConsoleServlet</servlet-class>
</servlet>
<servlet-mapping>
<servlet-name> MyServlet </servlet-name>
<url-pattern>/servlets/myservlet</url-pattern>
</servlet-mapping>
在IE里录入http://192.168.0.28/servlets/myservlet 就可以执行ConsoleServlet了
三．配置workers.properties文件
编辑以下内容存为workers.properties文件，在C:/Apache2/conf目录下
#-------------------begin-------------------------------
# tell mod_jk to use the load balancer
worker.list=lb

# define the worker1
worker.worker1.type=ajp13
worker.worker1.host=192.168.0.28
worker.worker1.port=8009
worker.worker1.lbfactor=1

# define the worker2
worker.worker2.type=ajp13
worker.worker2.host=192.168.0.28
worker.worker2.port=8009
worker.worker2.lbfactor=1

# define the load balancer
worker.lb.type=lb
worker.lb.balanced_workers=worker1,worker2

#---------------------end-------------------------

192.168.0.28为我的电脑IP是地址，当然jboss也在本机上
This workers.properties file defines two workers. You should define a worker for each JBoss node you want to forward requests to.

四. 置jboss的tomcat41-service.xml文件
在C:/jboss-3.0.7_jakarta-tomcat-4.1.24/server/all/deploy目录，当然你有default也行
把原来的Connector注释掉，并添加新的Connector，改为以下内容（包括已注释的）

<!-- Define a non-SSL Coyote HTTP/1.1 Connector on port 8080 -->
<!--Connector className="org.apache.coyote.tomcat4.CoyoteConnector"
port="80" minProcessors="5" maxProcessors="75"
enableLookups="true" redirectPort="8443"
acceptCount="100" debug="0" connectionTimeout="-1"
useURIValidationHack="false" disableUploadTimeout="true" /-->

<!-- An AJP 1.3 Connector on port 8009. Used by Apache mod_jk for example -->
<!--Connector className="org.apache.coyote.tomcat4.CoyoteConnector"
port="8009" minProcessors="5" maxProcessors="75"
enableLookups="true" redirectPort="8443"
acceptCount="10" debug="0" connectionTimeout="20000"
useURIValidationHack="false"
protocolHandlerClassName="org.apache.jk.server.JkCoyoteHandler"/-->

<!-- A HTTP Connector on port 8080 -->
<Connector className = "org.apache.catalina.connector.http.HttpConnector"
port = "8080" minProcessors = "3" maxProcessors = "10" enableLookups = "true"
acceptCount = "10" debug = "0" connectionTimeout = "60000"/>

<Connector className="org.apache.ajp.tomcat4.Ajp13Connector"
port="8009" minProcessors="5" maxProcessors="75"
acceptCount="10" />

端口8080可改为其它端口，但不可改为80, 因apache正在使用，8090端口修改要与workers.properties一致。

五．大功告成
重启apache
启动jboss_tomat (C:/jboss-3.0.7_jakarta-tomcat-4.1.24/bin/run –c all)/bin/run –c all)
在IE里录入http://localhost 或http://localhost/jmx-console/ 正常显示，一切OK

六、别名配置
找到以下行
AliasMatch ^/manual(?:/(?:de|en|fr|ja|ko|ru))?(/.*)?$ "C:/Apache2/manual$1"

<Directory "C:/Apache2/manual">
Options Indexes
AllowOverride None
Order allow,deny
Allow from all

<Files *.html>
SetHandler type-map
</Files>

SetEnvIf Request_URI ^/manual/de/ prefer-language=de
SetEnvIf Request_URI ^/manual/en/ prefer-language=en
SetEnvIf Request_URI ^/manual/fr/ prefer-language=fr
SetEnvIf Request_URI ^/manual/ja/ prefer-language=ja
SetEnvIf Request_URI ^/manual/ko/ prefer-language=ko
SetEnvIf Request_URI ^/manual/ru/ prefer-language=ru
RedirectMatch 301 ^/manual(?:/(de|en|fr|ja|ko|ru)){2,}(/.*)?$ /manual/$1$2
</Directory>

在其底下加上
Alias /mig/ "D:/Temp/"
<Directory "D:/Temp/">
Options Indexes FollowSymLinks MultiViews
AllowOverride None
Order allow,deny
Allow from all
</Directory>

这样你就可以通过http://192.168.0.28/mig/ 来访问了，如果D:/Temp目录下有index.html文件就可直接显示了